Original Creation Date: 07/30/98
Last Update Date: 05/22/03
Last Major Revision Date: 05/13/03
MNCLC430A-X REV 1A0
MICROCIRCUIT DATA SHEET
GENERAL PURPOSE 100MHz OP AMP WITH DISABLE
General Description
The Comlinear CLC430 is a low-cost, wideband monolithic amplifier for general purpose
applications.
The CLC430 utilizes Comlinear's patented current feedback circuit topology
to provide an op amp with a slew rate of 2000V/uS, 100MHz unity-gain bandwidth and fast
output disable function.
Like all current feedback op amps, the CLC430 allows the
frequency response to be optimized (or adjusted) by the selection of the feedback
resistor.
For demanding video applications, the 0.1dB bandwidth to 20MHz and differential
gain/phase of 0.03%/0.05deg makes the CLC430 the preferred component for broadcast quality
NTSC and PAL video systems.
The large voltage swing (28Vpp), continuous output current (85mA) and slew rate (2000V/uS)
provide high-fidelity signal conditioning for applications such as CCDs, transmission
lines and low impedance circuits.
Even driving loads of 100 Ohms, the CLC430 provides
very low 2nd and 3rd harmonic distortion at 1MHz (-76/-82dBc).
Video distortion, multimedia and general purpose applications will benefit from the
CLC430's wide bandwidth and disable feature.
Power is reduced and the output becomes a
high impedance when disabled.
The wide gain range of the CLC430 makes this general
purpose op amp an improved solution for circuits such as active filters,
differential-to-single-ended drivers, DAC transimpedance amplifiers and MOSFET drivers.
NS Part Numbers
CLC430AE-QML
CLC430AJ-QML
CLC430AWG-QML
Industry Part Number
CLC430A
Prime Die
LB1426B
Controlling Document
SEE FEATURES SECTION
Processing
MIL-STD-883, Method 5004
Quality Conformance Inspection
MIL-STD-883, Method 5005
Subgrp Description
Temp ( C)
o
1
Static tests at
+25
2
Static tests at
+125
3
Static tests at
-55
4
Dynamic tests at
+25
5
Dynamic tests at
+125
6
Dynamic tests at
-55
7
Functional tests at
+25
8A
Functional tests at
+125
8B
Functional tests at
-55
9
Switching tests at
+25
10
Switching tests at
+125
11
Switching tests at
-55
1