- 您现在的位置：买卖IC网 > PDF目录19919 > 597D106X9075R2T (Vishay Sprague)CAP TANT 10UF 75V 10% 3024 PDF资料下载
参数资料
| 型号： | 597D106X9075R2T |
| 厂商： | Vishay Sprague |
| 文件页数： | 10/20页 |
| 文件大小： | 0K |
| 描述： | CAP TANT 10UF 75V 10% 3024 |
| 产品目录绘图： | 597D Series Top 597D Series Side 1 597D Series Side 2 |
| 特色产品： | TANTAMOUNT? T97 & 597D Chip Capacitors |
| 标准包装： | 1 |
| 系列： | TANTAMOUNT® 597D |
| 电容： | 10µF |
| 电压 - 额定： | 75V |
| 容差： | ±10% |
| ESR（等效串联电阻）： | 500 毫欧 |
| 类型： | 保形涂层 |
| 工作温度： | -55°C ~ 125°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 3024（7660 公制） |
| 尺寸/尺寸： | 0.299" L x 0.236" W（7.60mm x 6.00mm） |
| 高度 - 座高（最大）： | 0.158"（4.01mm） |
| 制造商尺寸代码： | R |
| 特点： | 通用 |
| 包装： | 标准包装 |
| 产品目录页面： | 2053 (CN2011-ZH PDF) |
| 其它名称： | 718-1736-6 |
Conformal Coated Guide
www.vishay.com
SOLID ELECTROLYTE TANTALUM CAPACITORS
Solid electrolyte capacitors contain manganese dioxide,
TYPE 194D
Vishay Sprague
which is formed on the tantalum pentoxide dielectric layer
by impregnating the pellet with a solution of manganous
nitrate. The pellet is then heated in an oven, and the
manganous nitrate is converted to manganese dioxide.
The pellet is next coated with graphite, followed by a layer
of metallic silver, which provides a conductive surface
between the pellet and the can in which it will be enclosed.
After assembly, the capacitors are tested and inspected to
assure long life and reliability. It offers excellent reliability
and high stability for consumer and commercial electronics
with the added feature of low cost.
SnPb or Gold Plated Ni Cathode
End Cap Termination
Cathode
Backfill
Conductive Silver
Epoxy Adhesive
Encapsulation
SnPb or Gold Plated Ni Anode
End Cap Termination
Surface mount designs of “Solid Tantalum” capacitors use
lead frames or lead frameless designs as shown in the
accompanying drawings.
Sintered Tantalum
Pellet
MnO 2 /Carbon/
Sponge Teflon
Anode Backfill
Silver Coating
TANTALUM CAPACITORS FOR ALL DESIGN
CONSIDERATIONS
Solid electrolyte designs are the least expensive for a given
TYPE T96
rating and are used in many applications where their very
small size for a given unit of capacitance is of importance.
They will typically withstand up to about 10 % of the rated
DC working voltage in a reverse direction. Also important
are their good low temperature performance characteristics
and freedom from corrosive electrolytes.
Vishay Sprague patented the original solid electrolyte
capacitors and was the first to market them in 1956. Vishay
Sprague has the broadest line of tantalum capacitors and
has continued its position of leadership in this field. Data
sheets covering the various types and styles of Vishay
Sprague capacitors for consumer and entertainment
electronics, industry, and military applications are available
where detailed performance characteristics must be
specified.
TYPE 195D, 572D, 591D, 592D/W, 594D,
595D, 695D, T95, 14002
Intermediate
Cathode
Silver
Cathode Termination
(Silver + Ni/Sn or
Ni/SnPb Plating)
Encapsulation
Anode Termination
(Silver + Ni/Sn or
Ni/SnPb Plating)
Fuse
MnO 2 /Carbon/
Silver Coating
Epoxy Tower/
Sponge Teflon
Sintered Tantalum
Pellet
Cathode Termination
(Silver + Ni/Sn/Plating)
Encapsulation
TYPE T98
Anode Termination
(Silver + Ni/Sn/Plating)
Intermediate
Cathode
Fuse
Silver
MnO 2 /Carbon/Silver
Coating
Sintered Tantalum
Pellet
Sponge Teflon/Epoxy Tower
TYPE 597D/T97/13008
Cathode Termination
(Silver + Ni/Sn/Plating)
Encapsulation
Anode Termination
(Silver + Ni/Sn/Plating)
Cathode Termination
(Silver + Ni/Sn or
Ni/SnPb Plating)
Encapsulation
Anode Termination
(Silver + Ni/Sn or
Ni/SnPb Plating)
MnO 2 /Carbon/
Silver Coating
Epoxy Tower/
Sponge Teflon
Sintered Tantalum
Pellet
MnO 2 /Carbon/Silver
Coating
Sintered Tantalum
Pellet
Silver Epoxy
Sponge Teflon/Epoxy Tower
Revision: 03-Apr-14
2
Document Number: 40150
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
相关PDF资料 |
PDF描述 |
|---|---|
| ACM36DRKH | CONN EDGECARD 72POS .156 DIP SLD |
| ACC30DKRH-S1191 | CONN EDGECARD 60POS CARD EXTEND |
| RO-0505S | CONV DC/DC 1W SGL 5V OUT SIP4 |
| ECC15DCST | CONN EDGECARD 30POS DIP .100 SLD |
| RBB64DHAS | CONN EDGE DUAL .050 R/A 128 POS |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 597D107X0035F2T | 功能描述:钽质电容器-固体SMD 100uF 35volts 20% F case Conformal RoHS:否 制造商:AVX 电容:100 uF 电压额定值:20 V ESR: 容差:10 % 外壳代码 - in:2917 外壳代码 - mm:7343 高度:4.1 mm 制造商库存号:E Case 工作温度范围:- 55 C to + 125 C 系列:TBM 产品:Tantalum Solid Low ESR Commercial Grade 封装:Bulk |
| 597D107X0035F8T | 功能描述:CAP TANT 100UF 35V 20% 3024 RoHS:是 类别:电容器 >> 钽 系列:TANTAMOUNT® 597D 标准包装:1,000 系列:TANTAMOUNT® 695D 电容:3.3µF 电压 - 额定:50V 容差:±20% ESR（等效串联电阻）:3.2 欧姆 类型:保形涂层 工作温度:-55°C ~ 125°C 安装类型:表面贴装 封装/外壳:2414（6034 公制） 尺寸/尺寸:0.236" L x 0.135" W（6.00mm x 3.43mm） 高度 - 座高（最大）:0.085"（2.16mm） 引线间隔:- 制造商尺寸代码:F 特点:通用 包装:带卷 (TR) 寿命@温度:- |
| 597D108X0004E2T | 功能描述:钽质电容器-固体SMD 1000uF 4volts 20% E case Conformal RoHS:否 制造商:AVX 电容:100 uF 电压额定值:20 V ESR: 容差:10 % 外壳代码 - in:2917 外壳代码 - mm:7343 高度:4.1 mm 制造商库存号:E Case 工作温度范围:- 55 C to + 125 C 系列:TBM 产品:Tantalum Solid Low ESR Commercial Grade 封装:Bulk |
| 597D108X0004R2T | 功能描述:钽质电容器-固体SMD 1000uF 4volts 20% R case Conformal RoHS:否 制造商:AVX 电容:100 uF 电压额定值:20 V ESR: 容差:10 % 外壳代码 - in:2917 外壳代码 - mm:7343 高度:4.1 mm 制造商库存号:E Case 工作温度范围:- 55 C to + 125 C 系列:TBM 产品:Tantalum Solid Low ESR Commercial Grade 封装:Bulk |
| 597D108X0010F2T | 功能描述:钽质电容器-固体SMD 1000uF 10volts 20% F case Conformal RoHS:否 制造商:AVX 电容:100 uF 电压额定值:20 V ESR: 容差:10 % 外壳代码 - in:2917 外壳代码 - mm:7343 高度:4.1 mm 制造商库存号:E Case 工作温度范围:- 55 C to + 125 C 系列:TBM 产品:Tantalum Solid Low ESR Commercial Grade 封装:Bulk |
发布紧急采购，3分钟左右您将得到回复。