参数资料
型号: 5TF-30/76-5S
英文描述: 5 SECTIONS - 5 SECTIONS, 30 MHz - 76 MHz, TUNABLE BPF
文件页数: 4/4页
文件大小: 114K
代理商: 5TF-30/76-5S
1725 N. Salisbury Blvd. PO Box 2828 Salisbury, MD 21802
P: 800-780-2169, 410-860-5100 F: 410-860-1949 www.lorch.com lorchsales@lorch.com
37
Tunable Filters — Digital
24 MHz to 3000 MHz
Octave Tuning
High Position Resolution
Built in Backlash Compensation
Simple Command Structure
Lorch’s Standard Digitally Controlled Bandpass Filters are
available with 3 or 5 sections in the frequency range of 25
MHz to 3000 MHz. The typical insertion loss at center
frequency ranges from 0.7 dB to 1.0 dB and standard tuners
have a 3 dB passband bandwidth of 5%. Digitally
Controlled Bandreject Filters are also available. Standard
Bandreject Filters have 3 or 5 sections with a center
frequency between 25 MHz to 220 MHz and a notch depth
of 50 dB to 75 dB. The rejection bandwidth is typically 1%.
All Standard Digitally Controlled Filters have a dial
accuracy of better than 0.5%. The filter is controlled by
sending commands as ASCII strings to the RS232 port.
Communications:
The controller communicates via a RS232-C port with the following settings:
9600 BAUD, 8 Bits/Byte, No parity, 1 stop bit. If a PC us used to send commands to the controller, a standard serial
cable must be connected to the RS232 port of the filter.
Power Supply:
The digitally controlled filter is supplied with a 24 VDC, 0.625 mA, universal power supply. Typically a filter draws
about 250 mA of current.
Lifetime Expectancy & Servicing:
Lorch’s Digitally Controlled Filters do not require servicing. The meantime to failure is calculated at approximately
1,000,000 tune commands (based on 1 tune command every 30 seconds over 1 year) and is mainly determined by the
limited number of write cycles to EEPROM to keep track of the current frequency setting.
相关PDF资料
PDF描述
5TF-32/64-5S 5 SECTIONS - 5 SECTIONS, 32 MHz - 64 MHz, TUNABLE BPF
5TF-375/750-5S 5 SECTIONS - 5 SECTIONS, 375 MHz - 750 MHz, TUNABLE BPF
5TF-48/95-5S 5 SECTIONS - 5 SECTIONS, 48 MHz - 95 MHz, TUNABLE BPF
5TF-500/1000-5S 5 SECTIONS - 5 SECTIONS, 500 MHz - 1000 MHz, TUNABLE BPF
5TF-63/125-5S 5 SECTIONS - 5 SECTIONS, 63 MHz - 125 MHz, TUNABLE BPF
相关代理商/技术参数
参数描述
5TF3LGB5 制造商:Solico/MEC 功能描述:
5TF4 制造商:OlympicControls Corp/Amperite Co 功能描述:AUTOMATIC CURRENT REGULATOR MAINTAINS A CONSTANT CURRENT IN A CIRCUIT OVER A VERY WIDE RANGE OF INPUT VOLTAGES
5TG1138 制造商:Siemens 功能描述:DELTA sheet of PICTOG. labeling insert
5TG2480 制造商:Siemens 功能描述:DELTA telecommunication TAE 3x6NFN
5TG2484 制造商:Siemens 功能描述:DELTA insert antenna through-type/term.