参数资料
| 型号： | 6-5-468MP |
| 厂商： | 3M (TC) |
| 文件页数： | 7/9页 |
| 文件大小： | 0K |
| 描述： | TAPE ADHESIVE TRANSFER 6"X5YD |
| 产品培训模块： | Laminating Adhesive Families Tapes PSA Technology 101 |
| MSDS 材料安全数据表： | 467MP,468MP,9667MP,9668MP(L) MSDS |
| 标准包装： | 1 |
| 系列： | 468MP |
| 胶带类型： | 胶粘传输带 |
| 胶合剂： | 丙烯酸，200MP |
| 背衬，载体： | 聚乙烯涂层牛皮纸内衬 |
| 厚度： | 0.0093"（9.3 mils，0.236mm） |
| 厚度 - 胶合剂： | 0.0051"（5.1 mils，0.130mm） |
| 厚度 - 背胶，载体，衬垫： | 0.0042"（4.2 mils，0.107mm） |
| 宽： | 6.00"（152.40mm）1/2' |
| 长度： | 15'（4.6m）5 码 |
| 颜色： | 透明 |
| 使用： | 连接件，高温应用 |
| 温度范围： | 70 ~ 100°F（21 ~ 38°C） |
| 包装： | 散装 |
3M? Adhesive Transfer Tapes with Adhesive 200MP
467MP, 468MP, 467MPF, 468MPF, 7952MP, 7955MP, 7962MP, 7965MP, 9172MP,
9185MP, 9667MP, 9668MP
Master Width
Product
467MP
468MP
467MPF
468MPF
7952MP
7955MP
7962MP
7965MP
9172MP
9185MP
9667MP
9668MP
Master Width
48” or 60” (1.22 or 1.52 m)
54” (1.37 m)
48” (1.22 m)
54” (1.37 m)
More sizes may be available. Please call 800-223-7427 or talk to your local
3M representative for more information.
Application Techniques
For maximum bond strength (during installation of the final part) the surface
should be thoroughly cleaned and dried. Typical cleaning solvents are
heptane (for oily surfaces) or isopropyl alcohol for plastics. Use reagent grade
solvents since common household materials like rubbing alcohol frequently
contain oils to minimize the drying affect on skin and can interfere with the
performance of a pressure-sensitive adhesive.
*Note: Carefully read and follow the manufacturer’s precautions and
directions for use when working with solvents. These cleaning
recommendations may not be in compliance with the rules of certain air
quality management districts in California; consult applicable rules before
use.
It is necessary to provide pressure during lamination (1.5-20 pli
recommended) and during final part installation (10-15 psi) to allow the
adhesive to come into direct contact with the substrate. Using a hard edged
plastic tool, which is the full width of the laminated part, helps to provide the
necessary pressure at the point of lamination. Heat can increase bond strength
when bonding to metal parts (generally this same increase is observed at
room temperature over longer times, weeks). For plastic parts, the bond
strength is not enhanced with the addition of heat.
The ideal adhesive application temperature range is 60°F (15.6°C) to 100°F
(38°C). Application is not recommended if the surface temperature is below
50°F (10°C) because the adhesive becomes too firm to adhere readily. Once
properly applied, at the recommended application temperature, low
temperature holding is generally satisfactory (please refer to section VII of
the Typical Physical Properties and Performance Characteristics).
When bonding a thin, smooth, flexible material to a smooth surface, it is
generally acceptable to use 2 mils of 3M? Adhesive 200MP. If a texture is
visible on one or both surfaces, the 5 mil 3M adhesive 200MP would be
suggested. If both materials are rigid, it may be necessary to use a thicker
adhesive to successfully bond the components. 3M? VHB? Acrylic Foam
7
相关PDF资料 |
PDF描述 |
|---|---|
| 38770-0105 | CONN BARRIER STRIP 5CIRC .375" |
| G3PB-245B-2-VD DC12-24 | RELAY SSR PHASE 75-264VAC 45A |
| 10-141 | CONN BARRIER BLOCK .438" 10 CIRC |
| 9-141 | BARRIER BLOCK 9CIRC .438" |
| 10-140 | CONN BARRIER BLOCK .375" 10 CIRC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 6-5-468MP (CASE OF 2) | 功能描述:3M 468MP ADHESIVE TRANSFER TAPES 制造商:3m (tc) 系列:468MP 零件状态:在售 温度范围:-40°F ~ 300°F（-40°C ~ 149°C） 标准包装:2 |
| 65469-001 | 制造商:FCI 功能描述:CONN HOUSING RCP 4 POS 2.54MM ST - Trays |
| 65469-004 | 制造商:FCI 功能描述:10 POS MINI-ROD HSG W/ROD |
| 65469-007LF | 功能描述:ROD HSG DR LARGE INSUL. RoHS:是 类别:连接器，互连式 >> 矩形 - 外壳 系列:Mini-PV™, Basics+ 产品培训模块:AT/AHD Series Connector 产品目录绘图:AT Series AT Series Face 标准包装:480 系列:AT Series™ 连接器类型:插头 触点类型：:母形插口 位置数:8 间距:- 行数:2 行间距:- 安装类型:自由悬挂 触点终端:压接 紧固型:销锁 颜色:棕 特点:- 包装:散装 请注意:不提供触点 配套产品:889-1007-ND - CONN RCPT 8POS 14-20AWG SIZE 16AT04-08PD-EC01-ND - CONN RCPT 8PIN KEY D W/END CAP 相关产品:889-1049-1-ND - CONN SOCKET 16-18AWG SZ16 NICKEL889-1051-1-ND - CONN SOCKET 14-16AWG SZ16 NICKEL889-1055-ND - CONN SOCKET 20AWG SIZE 16889-1051-2-ND - CONN SOCKET 14-16AWG SZ16 NICKEL889-1049-2-ND - CONN SOCKET 16-18AWG SZ16 NICKEL889-1045-ND - CONN PLUG WEDGE 8POS GREENAT62-16-0622-ND - CONN FEMALE 18-20AWG NICKEL PLTE 其它名称:889-1019 |
| 6546B | 制造商:Aavid Thermalloy 功能描述:HEATSINKS |
发布紧急采购，3分钟左右您将得到回复。