- 您现在的位置：买卖IC网 > Datasheet目录601 > 606701-1 (TE Connectivity)TOOL REPLACE BLADE FOR 606700-1 Datasheet资料下载
参数资料
| 型号： | 606701-1 |
| 厂商： | TE Connectivity |
| 文件页数： | 1/2页 |
| 文件大小： | 0K |
| 描述： | TOOL REPLACE BLADE FOR 606700-1 |
| 标准包装： | 2 |
| 类型： | 附件，备用刀片 |
| 缆线类型： | 电气线缆 |
| 特点： | 用于 606700-1 剥线器 |
| 配用： | 606700-1-ND - CABLE STRIPPER 1" DIA. |
Cable Stripper/Slitter 606700- 1
and Replacement Blade 606701- 1
3. USING THE TOOL
Instruction Sheet
408-- 9688
26 APR 11 Rev B
Cable
(Ref)
Blade
“V” Clamp
(Closed)
Handle
Practice the following steps on scrap cable lengths
first.
1. Open the “V” clamp, and place the cable under
the “V” clamp. Close the “V” clamp. See Figure 1.
2. Adjust the blade as shown in Figure 2. DO NOT
set the blade too deep.
“V” Clamp
(Open)
Pull to Open
Toggle
Blade
Adjustment
CAUTION
!
The blade will be damaged if it is set deep
enough to nick the conductors.
Adjusting the Blade
1. INTRODUCTION
Figure 1
Cable
Insulation
Cable
Conductors
0.51 [.020]
Gap
NOTE
i
Dimensions in this instruction sheet are in
millimeters [with inches in brackets]. Figures are
not drawn to scale.
Blade
Cable Stripper/Slitter 606700--1 (Model CS--1) is
designed to strip insulation from electrical cable
having an outside diameter from 4.57 to 25.4 mm
[.180 to 1.0 in.] (for example, battery cable up to size
4/0 AWG). This instruction sheet covers tool
operating procedure and sharpening and replacement
of the blade.
Blade
Adjustment
Figure 2
3. Slowly rotate the tool clockwise several times
while pressing on the “V” clamp.
NOTE
i
This tool will not strip cable having cross--linked
insulation.
4. Using the toggle, rotate the blade 90 _ . While
maintaining pressure, rock the tool longitudinally off
of the cable.
Read these instructions thoroughly before using
this tool.
Reasons for reissue of this instruction sheet are
provided in Section 7, REVISION SUMMARY.
2. DESCRIPTION
This tool consists of a handle and a blade. The
handle features a toggle used to rotate the blade, a
blade adjustment used to adjust the length of
exposed part of the blade, and “V” clamp used to hold
the cable during stripping. The end of the “V” clamp
has a knife edge to pry open the cable insulation.
A replacement blade is held inside the handle.
5. Using the knife on the edge of the “V” clamp,
separate the cable insulation from the conductors,
and remove the insulation.
6. Inspect the cable for nicked strands. Re--adjust
the blade if necessary.
4. SHARPENING OR REPLACING THE BLADE
1. Hold the tool with the “V” clamp open (see
Figure 3).
2. Unscrew the blade adjustment; remove it from
the handle, and retain.
3. Remove the spring and washer, and rotate the
blade. Remove the blade. Retain these parts.
E 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company
All Rights Reserved
*Trademark
TOOLING ASSISTANCE CENTER 1--800--722--1111
PRODUCT INFORMATION 1--800--522--6752
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at www.te.com
1 of 2
TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product and/or Company names may be trademarks of their respective owners.
LOC B
相关PDF资料 |
PDF描述 |
|---|---|
| 6087 | KIT FIELD SERVICE RED ESD |
| 6088 | KIT LARGE SERVICE RED ESD |
| 612548 | STANDARD MICROCRIMP TOOL |
| 615708 | TOOL HAND CRIMP ADJUST 12-26AWG |
| 615715 | TOOL TURRET HEAD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 60-670-223 | 制造商:Omnimount 功能描述:DUAL TV CEILING TILT MOUNT FITS 32~65 IN TV DCM250 制造商:Omnimount 功能描述:Dual TV Ceiling Tilt Mount Fits 32~65" TV's DCM250 |
| 6067-041 | 制造商:INTERCON 功能描述: |
| 6067-047 | 制造商:INTERCON 功能描述: |
| 606713-1 | 功能描述:重负荷电源连接器 600 MCM QUICK DISCONNECT RoHS:否 制造商:Hirose Connector 系列:PS2 产品类型:Connectors 位置/触点数量: 端接类型:Crimp 触点材料: 触点电镀:Gold 电压额定值: 电流额定值:300 A 附件类型: |
| 606715-8 | 制造商:TE Connectivity 功能描述:AMP TUBULAR TERMINAL - Bulk |
发布紧急采购，3分钟左右您将得到回复。