- 您现在的位置：买卖IC网 > Datasheet目录602 > 63600-0478 (Molex Connector Corporation)TOOL IDT HAND TOOL HANDLE Datasheet资料下载
参数资料
| 型号： | 63600-0478 |
| 厂商： | Molex Connector Corporation |
| 文件页数： | 2/4页 |
| 文件大小： | 0K |
| 描述： | TOOL IDT HAND TOOL HANDLE |
| 其它有关文件： | Overlap Style Insulation Crimps |
| 标准包装： | 1 |
| 系列： | C-Grid® SL™ |
| 工具类型： | 手持压接器 - 无模具 |
| 适用于相关产品： | IDC 模块 |
| 特点： | 顶端插入，棘齿 |
| 配用： | WM6672-ND - HANDTOOL MANUAL IDT WM6545-ND - TOOL HAND DIESET MODULE |
| 其它名称： | 063600-0478 063600-0478-E 0636000478 0636000478-E 63600-0478-E 636000478 636000478-E |
IDT Manual Hand Tool
OPERATION
Select the appropriate Change Head and snap it on the front of the
hand tool until it engages, refer to the chart.
Refer to the specific Change Head module’s Specification Sheet for
operating instructions.
Maintenance
RATCHET
RELEASE LEVER
It is recommended that each operator of the tool be made aware of,
and responsible for, the following maintenance steps:
1. Remove the plastic handles from the metal tool frame by removing
Figure 1
the screws and remove dust, moisture, and other contaminants
with a clean brush, or soft, lint free cloth.
2. Do not use any abrasive materials that could damage the tool.
3. Make certain all pins; pivot points and bearing surfaces are protected with a thin coat of high quality machine
oil. Do not oil excessively. The tool was engineered for durability but like any equipment it needs cleaning and
lubrication for a maximum service life of trouble free crimping. Light oil used at the pivot points every 5,000
crimps or 3 months, will significantly enhance the tool life.
4. Wipe excess oil from hand tool, particularly from crimping area.
Miscrimps or Jams
Should this tool ever become stuck or jammed in a partially closed position, Do Not force the handles open or
closed. The tool will open easily by pressing the ratchet release lever up. See Figure 1.
How to Adjust Tool
Preload
It may be necessary over the
life of the tool to adjust tool
handle preload force. Listed
below are the steps required
to adjust the crimping force of
the hand tool to obtain proper
crimp conditions:
NUMBERED ADJUSTMENT
WHEEL
REMOVE THE 2MM LOCKING SCREW
TURN WITH A SMALL
SCREW DRIVER
TURN CLOCKWISE (CW) OR
COUNTER CLOCKWISE (CCW)
TO ADJUST THE PRE-LOAD
Figure 2
Doc No: ATS-636000478
Revision: B
Release Date: 12-22-05
Revision Date: 04-14-09
UNCONTROLLED COPY
Page 2 of 4
相关PDF资料 |
PDF描述 |
|---|---|
| 63811-0200 | TOOL HAND CRIMP PROTOTYPE 1.25MM |
| 63811-1575 | LOCATOR DIE FOR T0130 SERIES |
| 63811-2100 | TOOL CRIMP 14-18 (2)18AWG MALE |
| 63811-6000 | TOOL HAND CRIMP 18-22AWG |
| 63811-6600 | TOOL HAND CRIMP FOR .156" TERM |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 63600-0479 | 功能描述:手工工具 MAIN SPRING MAIN SPRING RoHS:否 制造商:Molex 产品:Extraction Tools 类型: 描述/功能:Extraction tool |
| 63600-0480 | 功能描述:手工工具 PAWL SPRING PAWL SPRING RoHS:否 制造商:Molex 产品:Extraction Tools 类型: 描述/功能:Extraction tool |
| 63600-0481 | 制造商:MOLEX 功能描述:SHOULDER SCREW |
| 63600-0511 | 功能描述:手工工具 PROBE TEST PROBE TEST RoHS:否 制造商:Molex 产品:Extraction Tools 类型: 描述/功能:Extraction tool |
| 63600-0512 | 功能描述:手工工具 RECEPTACLE TEST PIN RECEPTACLE TEST PIN RoHS:否 制造商:Molex 产品:Extraction Tools 类型: 描述/功能:Extraction tool |
发布紧急采购，3分钟左右您将得到回复。