- 您现在的位置：买卖IC网 > Datasheet目录602 > 63811-0200 (Molex Connector Corporation)TOOL HAND CRIMP PROTOTYPE 1.25MM Datasheet资料下载
参数资料
| 型号： | 63811-0200 |
| 厂商： | Molex Connector Corporation |
| 文件页数： | 3/5页 |
| 文件大小： | 0K |
| 描述： | TOOL HAND CRIMP PROTOTYPE 1.25MM |
| 其它有关文件： | Overlap Style Insulation Crimps |
| 标准包装： | 1 |
| 系列： | PicoBlade™ |
| 工具类型： | 手动压接器 |
| 适用于相关产品： | 矩形触点，28-32 AWG |
| 特点： | 侧面插入，棘齿 |
| 其它名称： | 063811-0200 063811-0200-E 0638110200 0638110200-E 638-11-0200-P 63811-0200-E 63811-0200-P 638110200 638110200-E WM9931 |
Hand Crimp Tool for 1.25mm (.049") Pitch Crimp Terminals
OPERATION
Open the tool by squeezing the handles together, at the end of the closing stroke, the ratchet mechanism will
release the handles, and the hand tool will spring open.
Crimping Terminals
PRE-STRIPPED WIRE
LOCATOR
CONDUTOR
GRIPS
INSULATION
GRIPS
TERMINAL
Figure 1
TERMINAL
Figure 2
WIRE
1. Place the terminal into the correct die profile (A or B) in the jaws of the hand tool.
2. Partially close the tool until the terminal is held in place. See Figure 1. If the insulation diameter is too large to
do this, then place the insulation down into the terminal before closing the tool.
3. Position a wire into the terminal so the wire lines up with the
conductor and insulation grips visually.
4. Finish closing the hand tool until the ratchet releases. See Figure 4.
5. Then open the tool and carefully remove the crimped terminal.
Maintenance
It is recommended that each operator of the tool be made aware of, and
responsible for, the following maintenance steps:
1. Remove dust, moisture, and other contaminants with a clean brush,
or soft, lint free cloth.
Figure 3
2. Do not use any abrasive materials that could damage the tool.
3. Make certain all pins; pivot points and bearing surfaces are protected with a thin coat of high quality
machine oil. Do not oil excessively.
4. When tool is not in use, keep the handles closed to prevent objects from becoming lodged in the crimping
dies, and store the tool in a clean, dry area.
Miscrimps or Jams
Should this tool ever become stuck or jammed in a partially closed position, Do Not force the handles open or
closed . The tool will open easily by lifting the ratchet release lever. See Figure 4.
Doc No: ATS-638110200
Revision: G
Release Date: 12-10-03
Revision Date: 04-14-08
UNCONTROLLED COPY
Page 3 of 5
相关PDF资料 |
PDF描述 |
|---|---|
| 63811-1575 | LOCATOR DIE FOR T0130 SERIES |
| 63811-2100 | TOOL CRIMP 14-18 (2)18AWG MALE |
| 63811-6000 | TOOL HAND CRIMP 18-22AWG |
| 63811-6600 | TOOL HAND CRIMP FOR .156" TERM |
| 64001-3200 | TOOL FOR SEALED RING/SPADE/BUTT |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 63811-0200 | 制造商:Molex 功能描述:TOOLSCRIMPHANDPROTOTYPE CRIMP TOOL FO |
| 63811-0200-E | 制造商:Molex 功能描述:TOOL HAND CRIMP PROTOTYPE 1.25MM |
| 63811-0201 | 功能描述:折皱器 LOCATER ASSEMBLY RoHS:否 制造商:Hirose Connector 类型: 描述/功能:Cable and Shield Crimper |
| 63811-0300 | 功能描述:折皱器 CRIMP TOOL 50079 series RoHS:否 制造商:Hirose Connector 类型: 描述/功能:Cable and Shield Crimper |
| 63811-0300 | 制造商:Molex 功能描述:Hand Crimp Tool |
发布紧急采购，3分钟左右您将得到回复。