参数资料
| 型号： | 66189 |
| 厂商： | Desco |
| 文件页数： | 1/1页 |
| 文件大小： | 0K |
| 描述： | MAT RUBBER ECON BLU 0.080X36X72" |
| 标准包装： | 1 |
| 垫子类型： | 桌子，工作台 |
| 形状： | 矩形 |
| 长度： | 6'（1.83m） |
| 宽： | 3'（0.91m） |
| 厚度： | 0.06" (1.52mm) |
| 颜色： | 深蓝色 |
| 材质： | 橡胶 |
| 特点： | 耗散 |
| 包括： | 接地软线，接地卡扣 |
| 其它名称： | 16-1128 |
DESCO WEST: 3651 WALNUT AVE., CHINO, CA 91710 WEB SITE: Desco.com
PHONE (909) 627-8178 FAX (909) 627-7449
DESCO EAST: ONE COLGATE WAY, CANTON, MA 02021-1407
PHONE (781) 821-8370
FAX (781) 575-0172
DATE:
May
2010
TWO LAYER RUBBER .060" thickness
Description:
Two Layer Rubber meets the worksurface
required limits of ANSI/ESD S20.20
of < 1 x 10E9 ohms. When properly
grounded, the purpose of the Two Layer
Rubber worksurface is two-fold. (1) To
provide a surface where electrostatic
charges are limited, and (2) To provide
a surface that will remove charges from
all conductors (including ESD susceptible
devices and assemblies) that are placed
on the surface. Where potential CDM
(Charged Device Model) damage is a
concern, the worksurface should have a
lower limit of 1 x 10E6 ohms removing
charges at a slower rate. Surfaces that
are <10^6 ohms can discharge ESD
susceptible items too quickly. A variety
of standard size mats are provided for
ESD workstations, shelves, carts or
cafeteria-style trays in an ESD Protected
Area.
Two Layer Rubber is suitable for use with
continuous monitors.
Dark Blue
Electrical Properties:
Property
Test Method
Value
RTG Resistance (dark blue):
ANSI/ESD S4.1
10E6 – 10E8 ohms
RTT Resistance (dark blue):
ANSI/ESD S4.1
10E6 – 10E8 ohms
RTT Resistance (black):
ANSI/ESD S4.1
<10E5 ohms
Specifications:
Construction:
Two Layer Rubber
Thickness:
0.060” (1.5mm) -0+10%
Texture:*
Smooth on both sides
Colors:*
Dark Blue (top) and Black (bottom)
*Color, texture, and gauge may vary between lots and mills
Grounding: This material must be properly grounded for optimum electrial performance.
Cleaning: For optimum electrical performance, surface must be cleaned regularly using an ESD mat cleaner. We suggest using our
Reztore Surface & Mat Cleaner Item #10435 or Static-Wipes Item #10600. Do not use cleaners that are not specifically designed for ESD
control use. As they can contain chemicals and/or leave residue that will alter the ESD and physical properties.
Disclaimer:
All statements, technical data, and recommendations contained herein are based upon tests we believe to be reliable. However, the accuracy or completeness
thereof is not guaranteed. The proper and correct applications of products and data is the responsibility of the user. Statements or recommendations not
contained herein shall have no force or effect unless embodied in a written agreement signed by authorized officers of Desco Industries, Inc.
Matting materials have a tendency to shrink slightly
when first unrolled. In applications where length is
critical, allow the material to relax for at least 4 hours
before cutting to size. Always trim with a sharp knife or
razor blade.
2010 DESCO INDUSTRIES INC.
Employee Owned
Limited Warranty:
Desco warrants for 90 days that matting
products will be free of defects in materials
and workmanship. Damage to matting caused
by misuse of any kind, including using
inappropriate cleaners is not covered by Desco
Limited Warranty.
Grounding Intervals for ESD Mats
Sufficient ground cords should be used to
reliably meet ANSI/ESD S20.20 Table 3 less
than 1 x 10E9 ohms for worksurfaces. An
industry recommendation has been that
continuous runs of ESD matting should be
grounded at ten-foot intervals to allow proper
charge decay rates with each individual ESD
mat should be grounded with ground snap
located no further than five feet from either end.
Tolerances:
Width ±.250"
Length ± .250" every 1 linear foot of
running material.
MAT TOP KIT INCLUDES
1 Benchmat, Two Layer Rubber,
size as specified
1 Grounding Cord
*Item 66185 has 1" radius corners and
does not include grounding hardware.
MATERIAL:
Dual-Layer Rubber
DRAWING PM-128
Mat Top Kit Item Numbers
16" x 24" 66185*
Size
Dark Blue
24" x 36" 66184
24" x 48" 66186
36" x 72" 66189
Hardware is not included with rolls.
Roll Stock Item NumbeRS
Size
Dark Blue
Specifications and procedures subject to change without notice
Made in America
相关PDF资料 |
PDF描述 |
|---|---|
| 431511-26-0 | TERM BARRIER 26CIRC 1 ROW .4375 |
| 431411-26-0 | TERM BARRIER 26CIRC 1 ROW .4375 |
| 430701-24-0 | TERM BARRIER 24CIRC 1 ROW .4375 |
| GBSAX-19 | TERM BARRIER 19CIRC SGL ROW .438 |
| OSTV4090180 | TERM BLOCK RISING CLAMP 9CIRC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 66189-001 | 制造商:MII 制造商全称:MII 功能描述:RADIATION TOLERANT OPTOCOUPLER PIN FOR PIN REPLACEMENT FOR 3C91C |
| 66189-101 | 制造商:MII 制造商全称:MII 功能描述:RADIATION TOLERANT OPTOCOUPLER PIN FOR PIN REPLACEMENT FOR 3C91C |
| 66189-103 | 制造商:MII 制造商全称:MII 功能描述:RADIATION TOLERANT OPTOCOUPLER PIN FOR PIN REPLACEMENT FOR 3C91C |
| 66189-105 | 制造商:Micropac Industries Inc 功能描述:Optocoupler; Rad Tolerant; 3C91 Type; JTXV Screened |
| 661892-000 | 制造商:TE Connectivity 功能描述:TMS-SCE-3/4-2.0-9-CS5551 - Bulk |
发布紧急采购，3分钟左右您将得到回复。