- 您现在的位置：买卖IC网 > Datasheet目录3 > 67-31B/GHC-YX2Y2MZ3/2T (Everlight Electronics Co Ltd)LED TOPLED 3PLCC SMD Datasheet资料下载
参数资料
| 型号： | 67-31B/GHC-YX2Y2MZ3/2T |
| 厂商： | Everlight Electronics Co Ltd |
| 文件页数： | 9/10页 |
| 文件大小： | 153K |
| 描述： | LED TOPLED 3PLCC SMD |
| 标准包装： | 2,000 |
| 颜色： | 绿 |
| Millicandela 等级： | 3375mcd |
| 正向电压： | 3.35V |
| 电流 - 测试： | 30mA |
| 波长 - 主： | 528nm |
| 波长 - 峰值： | 518nm |
| 视角： | 60° |
| 透镜类型： | 透明 |
| 透镜样式/尺寸： | 圆形，带圆顶，2.7mm |
| 封装/外壳： | 4-PLCC |
| 尺寸/尺寸： | 3.50mm L x 2.70mm W |
| 高度： | 3.00mm |
| 安装类型： | 表面贴装 |
| 包装： | 带卷 (TR) |
LifecyclePhase:
Revision : 2
Expired Period: Forever
Release Date:2008-09-20 00:15:56.0
EVERLIGHT ELECTRONICS CO.,LTD.
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 9 of 10
Device No. : DSE-63B-007 Prepared date:14-Feb-2008 Prepared by: Rita Shen
67-31B/GHC-YX2Y2MZ3/2T
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection, otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package: The LEDs should be kept at 30 or less and 90%RH or less.
2.3 After opening the package: The LED's floor life is 1 year under 30 or less and 60% RH or less.
If unused LEDs remain, it should be stored in moisture proof packages.
2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60 5 for 24 hours.
3. Soldering Condition
3.1 Pb-free solder temperature profile
120 Sec. Max.
1~5 癈 / Sec.
Pre-heating
180~200癈
60 Sec. Max.
Above 220癈
260癈. Max.
10 Sec. Max.
1~5 癈 / Sec.
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
4.Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 350 for 3
seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more
intervals, and do soldering of each terminal. Be careful because the damage of the product is often
started at the time of the hand solder.
相关PDF资料 |
PDF描述 |
|---|---|
| 7010X13 | LED YELLOW NON-DIFF 1206 SMD |
| 7011X1/17 | LED RED NON-DIFF 1206 SMD |
| 7016X3 | LED 585NM YLW NON-DIFF 1208 SMD |
| 7016X5/7 | LED GREEN/YELLOW CLEAR |
| 7017X6 | LED 0603 BLUE CLEAR DIFF |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 67-31E-RSC-AV1W2B9Z5-2T | 制造商:EVERLIGHT 制造商全称:Everlight Electronics Co., Ltd 功能描述:Power Top View LED |
| 67-31EZ-BLT-2AV2ABC2F-2T8-AM | 制造商:Everlight Electronics Co 功能描述: |
| 67-31F/RSC-AX2Y2B9Z5/CT | 制造商:EVERLIGHT 制造商全称:Everlight Electronics Co., Ltd 功能描述:Technical Data Sheet Power Top View LED With Lens |
| 67-31F/YSC-CX2Y1B9Z5/BT | 制造商:EVERLIGHT 制造商全称:Everlight Electronics Co., Ltd 功能描述:Technical Data Sheet Power Top View LED With Lens. |
| 67-31F-RSC-AX2Y2B9Z5-CT | 制造商:EVERLIGHT 制造商全称:Everlight Electronics Co., Ltd 功能描述:Technical Data Sheet Power Top View LED With Lens |
发布紧急采购，3分钟左右您将得到回复。