- 您现在的位置：买卖IC网 > PDF目录294022 > 67-31F/T7C-PZ01Z11MZ3/CT (EVERLIGHT ELECTRONICS CO LTD) SINGLE COLOR LED, PURE WHITE PDF资料下载
参数资料
| 型号： | 67-31F/T7C-PZ01Z11MZ3/CT |
| 厂商： | EVERLIGHT ELECTRONICS CO LTD |
| 元件分类： | LED |
| 英文描述： | SINGLE COLOR LED, PURE WHITE |
| 封装： | ROHS COMPLIANT, PLASTIC, LCC-3 |
| 文件页数： | 2/11页 |
| 文件大小： | 172K |
| 代理商： | 67-31F/T7C-PZ01Z11MZ3/CT |
EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet
Power Top View LED With Lens.
67-31F/T7C-PZ01Z11MZ3/CT
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev.1
Page: 10 of 11
Device No. : DSE-0000188
Prepared date:07-Oct-2008
Prepared by:Rita Shen
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection, otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package: The LEDs should be kept at 30
or less and 90%RH or less.
℃
2.3 After opening the package: The LED's floor life is 1 year under 30 deg C or less and 60% RH or less.
If unused LEDs remain, it should be stored in moisture proof packages.
2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60±5
for 24 hours.
℃
3. Soldering Condition
3.1 Pb-free solder temperature profile
120 Sec. Max.
1~5 °C / Sec.
Pre-heating
180~200°C
60 Sec. Max.
Above 220°C
260°C. Max.
10 Sec. Max.
1~5 °C / Sec.
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
4. Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 350
for 3 secon
℃
ds
within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals,
and do soldering of each terminal. Be careful because the damage of the product is often started
at the time of the hand solder.
相关PDF资料 |
PDF描述 |
|---|---|
| 67018 | TRIAC-DRIVER-OUTPUT OPTOCOUPLER |
| 6701 | Peripheral IC |
| 670 | SUPER ENAMEL - GLOSS BLACK |
| 671 | SUPER ENAMEL - MATT BLACK |
| 671-(SERIES) | Analog IC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 67-31F-YSC-CX2Y1B9Z5-BT | 制造商:EVERLIGHT 制造商全称:Everlight Electronics Co., Ltd 功能描述:Technical Data Sheet Power Top View LED With Lens. |
| 673-1G | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Single Phase Bridge |
| 6731G5 | 功能描述:重负荷电源连接器 SB175 FUSELOK #2 AWG CONTACT W/ CBL CLAMP RoHS:否 制造商:Hirose Connector 系列:PS2 产品类型:Connectors 位置/触点数量: 端接类型:Crimp 触点材料: 触点电镀:Gold 电压额定值: 电流额定值:300 A 附件类型: |
| 67-31H | 制造商:EVERLIGHT 制造商全称:Everlight Electronics Co., Ltd 功能描述:Technical Data Sheet Power Top View LEDs With Lens |
| 67-31H/B2C-AY1Z0MZ3/CT | 功能描述:标准LED-SMD PLCC LED RoHS:否 制造商:Vishay Semiconductors 封装 / 箱体:0402 LED 大小:1 mm x 0.5 mm x 0.35 mm 照明颜色:Red 波长/色温:631 nm 透镜颜色/类型:Water Clear 正向电流:30 mA 正向电压:2 V 光强度:54 mcd 显示角:130 deg 系列:VLMx1500 封装:Reel |
发布紧急采购，3分钟左右您将得到回复。