参数资料
型号: 71M6521FE-IM/F
厂商: MAXIM INTEGRATED PRODUCTS INC
元件分类: 模拟信号调理
英文描述: SPECIALTY ANALOG CIRCUIT, QCC68
封装: LEAD FREE, LQFN-68
文件页数: 88/103页
文件大小: 1691K
代理商: 71M6521FE-IM/F
71M6521DE/71M6521FE
Energy Meter IC
DATA SHEET
OCTOBER 2010
v1.1
2005-2010 Teridian Semiconductor Corporation
Page: 85 of 103
A Maxim Integrated Products Brand
19-5370; 10/10
CE
Address
Name
Default
Description
0x7C
MAINEDGE_X
N/A
The number of zero crossings of the selected voltage in the previous ac-
cumulation interval. Zero crossings are either direction and are debounced.
0x7B
TEMP_RAW_X
N/A
Filtered, unscaled reading from the temperature sensor.
0x12
GAIN_ADJ
16384
Scales all voltage and current inputs. 16384 provides unity gain.
0x14
SAG_THR
443000
The threshold for sag warnings. The default value is equivalent to 80V RMS
if VMAX = 600V. The LSB value is VMAX * 4.255*10
-7V (peak).
GAIN_ADJ is a scaling factor for measurements based on the temperature. GAIN_ADJ is controlled by the MPU for
temperature compensation.
Pulse Generation
CE
Address
Name
Default
Description
0x11
WRATE
122
Kh = VMAX*IMAX*47.1132 / (In_8*WRATE*NACC*X) Wh/pulse. The default
value results in a Kh of 3.2Wh/pulse when 2520 samples are taken in each
accumulation interval (and VMAX=600, IMAX = 208, In_8 = 1, X = 6).
The maximum value for WRATE is 2
15 – 1.
0x0E
APULSEW
0
Watt pulse generator input (see DIO_PW bit). The output pulse rate is:
APULSEW * FS * 2
-32 * WRATE * X * 2-14. This input is buffered and can be
loaded during a computation interval. The change will take effect at the
beginning of the next interval.
0x0F
APULSER
0
VAR pulse generator input (see DIO_PV bit). The output pulse rate is:
APULSER * FS*2
-32 * WRATE * X * 2-14. This input is buffered and can be
loaded during a computation interval. The change will take effect at the
beginning of the next interval.
WRATE controls the number of pulses that are generated per measured Wh and VARh quantities. The lower WRATE is the
slower the pulse rate for measured energy quantity. The metering constant Kh is derived from WRATE as the amount of energy
measured for each pulse. That is, if Kh = 1Wh/pulse, a power applied to the meter of 120V and 30A results in one pulse per
second. If the load is 240V at 150A, ten pulses per second will be generated.
The maximum pulse rate is 7.5kHz.
The maximum time jitter is 67s and is independent of the number of pulses measured. Thus, if the pulse generator is
monitored for 1 second, the peak jitter is 67ppm. After 10 seconds, the peak jitter is 6.7ppm.
The average jitter is always zero. If it is attempted to drive either pulse generator faster than its maximum rate, it will simply
output at its maximum rate without exhibiting any rollover characteristics. The actual pulse rate, using WSUM as an example,
is:
Hz
X
F
WSUM
WRATE
RATE
S
46
2
=
,
where FS = sampling frequency (2520.6Hz), X = Pulse speed factor
相关PDF资料
PDF描述
71M6521FE-IGT/F SPECIALTY ANALOG CIRCUIT, QFP64
71M6531D-IMR/F 1-CHANNEL POWER SUPPLY MANAGEMENT CKT, QCC68
71M6532D-IGTR/F 1-CHANNEL POWER SUPPLY MANAGEMENT CKT, PQFP100
71M6532F-IGT/F 1-CHANNEL POWER SUPPLY MANAGEMENT CKT, PQFP100
71M6531D-IM/F 1-CHANNEL POWER SUPPLY MANAGEMENT CKT, QCC68
相关代理商/技术参数
参数描述
71M6521FE-IMR 制造商:Maxim Integrated Products 功能描述:Metering Systems on a Chip - SoC Residential Energy Meter IC
71M6521FE-IMR/F 功能描述:计量片上系统 - SoC Residential Energy Meter IC RoHS:否 制造商:Maxim Integrated 核心:80515 MPU 处理器系列:71M6511 类型:Metering SoC 最大时钟频率:70 Hz 程序存储器大小:64 KB 数据 RAM 大小:7 KB 接口类型:UART 可编程输入/输出端数量:12 片上 ADC: 安装风格:SMD/SMT 封装 / 箱体:LQFP-64 封装:Reel
71M6521-TGP1-68M 制造商:Maxim Integrated Products 功能描述:Programmer Accessories Gang Programmer Base w/6521 Socket Brd
71M6523-DB 功能描述:开发板和工具包 - 8051 71M6521D Demo Brd RoHS:否 制造商:Silicon Labs 产品:Development Kits 工具用于评估:C8051F960, Si7005 核心: 接口类型:USB 工作电源电压:
71M6523-IM 功能描述:计量片上系统 - SoC Residential Energy Meter IC RoHS:否 制造商:Maxim Integrated 核心:80515 MPU 处理器系列:71M6511 类型:Metering SoC 最大时钟频率:70 Hz 程序存储器大小:64 KB 数据 RAM 大小:7 KB 接口类型:UART 可编程输入/输出端数量:12 片上 ADC: 安装风格:SMD/SMT 封装 / 箱体:LQFP-64 封装:Reel