参数资料
| 型号： | 73742 |
| 厂商： | Desco |
| 文件页数： | 1/4页 |
| 文件大小： | 0K |
| 描述： | JACKET W/SNAPS BLUE 4XLARGE |
| 标准包装： | 1 |
| 系列： | Statshield® |
| 服装类型： | 外套，带按扣 |
| 尺寸： | 4XLarge |
| 材质： | 聚酯 |
| 颜色： | 蓝 |
| 特点： | 袖口带 4mm 卡扣式插口，胯部带 4mm 卡钉 |
Statshield Smocks
Grounding, Testing and Maintenance
Description
Desco’ Statshield smocks smocks are designed to be
antistatic, low tribocharging, and create a Faraday Cage
around the torso and arms of the wearer to protect ESD
susceptible items from electrostatic fields generated by
clothing on the operator’s clothing. Static control garments
are intended to attenuate electrostatic fields that may be
present on personnel clothing. Statshield Smocks meet the
requirement for Groundable Static Control Garment System
per ANSI/ESD S20.20 required limit of < 3.5 x 107 ohm Rtg
tested per ANSI/ESD STM2.1 and ESD TR53.
“While a person may be grounded using a wrist strap or
other grounding methods, that does not mean that insulative
clothing fabrics can dissipate a charge to that person’s
Made in the
United States of America
TECHNICAL BULLETIN TB-2055
TB-2055 December 2013 Page 1 of 4
2013 DESCO INDUSTRIES INC.
Employee Owned
DESCO WEST -
3651 Walnut Avenue, Chino, CA 91710 (909) 627-8178
DESCO EAST
- One Colgate Way, Canton, MA 02021-1407 (781) 821-8370 Web Site: Desco.com
COIL CORD TO GROUND
NO WRISTBAND
NECESSARY
COIL CORD TO GROUND
WRISTBAND (NOT INCLUDED)
SNAPS TO CONNECT TO GARMENT
Figure 2. Desco Statshield Premium Jacket with Snaps.
Also available in Lab Coat length.
Figure 1. Desco Statshield Premium Lab Coat with
Conductive Cuffs. Also available in Jacket length.
skin and then to ground. Personnel clothing usually is
electrically separate or isolated from the body.” “Groundable
Static Control Garment System, Garments that are used to
establish the primary ground path for a person shall provide
a resistance of less than 35 megohms from the person to
the groundable point of the garment.”[ESD TR20.20-2008
section 5.3.13 Garments]
Statshield smocks are constructed of a lightweight
dissipative material which made from texturized polyester
and a minimum of 9% carbon nylon monofilament. The
conductive nylon fibers are woven in a chain-link design
throughout the material, providing continuous and consistent
charge dissipation. All of the seams in Statshield smocks
are designed to maintain electrical continuity from panel to
panel and from sleeve to sleeve in accordance with the ESD
Association Garment Standard, ESD-STM2.1.
“After verifying that the garment has electrical conductivity
through all panels, the garment should be electrically
bonded to the grounding system of the wearer so as not to
act as a floating conductor.” [ESD TR20.20-2008 section
5.3.13 Garments] The conductive fabric in smock is a
conductor. If not grounded, the smock can become an
isolated charged conductor. If not grounded via a wrist strap
coil cord, ground the ESD garment using ESD footwear to
ESD flooring.
The dissipative material becomes part of the ground path
to remove static charges. Statshield smocks are available
in two lengths -- the lab coat length and the jacket length.
Both lengths are available in two styles - with snaps and
with conductive elastic cuffs. Smocks are available in eight
colors* -- blue, white, teal, black, pink, grey and orange.
Statshield
smocks incorporate a “hip-to-cuff” grounding
feature which allows for hands-free grounding with no
cord attached to the operator’s wrist. This feature allows
connection of a ground cord to a 4mm snap stud on the hip.
A seam of carbon-suffused threads provides a secure and
direct electrical connection from the snap stud on the hip
to conductive elastic cuffs. Statshield smocks ground the
person when used in this manner. Standard touch testing or
continuous monitoring can be used to test the “hip-to-cuff”
function.
*Fabric lots vary slightly in color.
相关PDF资料 |
PDF描述 |
|---|---|
| 284093-8 | TERM BLOCK 8POS TOP ENTRY 5MM |
| 7-1611004-4 | RELAY CONTACTOR DPST 40A 240V |
| 1776252-6 | TERM BLOCK 6POS 45DEG ENTRY 5MM |
| 73741 | JACKET W/SNAPS BLUE 3XLARGE |
| 282857-5 | TERM BLOCK 5POS SIDE ENT 5.08MM |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 737426-1 | 功能描述:D-Sub后壳 CABLE CLAMP KIT F/HD CONN 9W RoHS:否 制造商:Amphenol Commercial Products 类型:Two Piece Backshell 电缆引入数量:1 电缆引入角:Straight 系列:17E 电缆直径: 位置数量:9 外壳大小:E 外壳电镀:Zinc |
| 737426-2 | 功能描述:D-Sub标准连接器 CABLE CLAMP KIT F/HD CONN 9W RoHS:否 制造商:Omron Electronics 位置/触点数量:9 排数:2 型式:Female 安装风格:Through Hole 安装角:Right 端接类型:Solder 过滤: |
| 737-428 | 功能描述:罩类、盒类及壳类产品 AK28+1 28 pole CB Enclosure RoHS:否 制造商:Bud Industries 产品:Boxes 外部深度:6.35 mm 外部宽度:6.35 mm 外部高度:2.56 mm NEMA 额定值: IP 等级: 材料:Acrylonitrile Butadiene Styrene (ABS) 颜色:Red |
| 7-374-2-BA | 功能描述:HEATSINK VERT .50"H BLACK TO-220 RoHS:是 类别:风扇，热管理 >> 热敏 - 散热器 系列:7 产品目录绘图:BDN12-3CB^A01 标准包装:300 系列:BDN 类型:顶部安装 冷却式包装:分类（BGA，LGA，CPU，ASIC……） 固定方法:散热带，粘合剂（含） 形状:方形，鳍片 长度:1.21"（30.73mm） 宽:1.210"（30.73mm） 直径:- 机座外的高度（散热片高度）:0.355"（9.02mm） 温升时的功耗:- 在强制气流下的热敏电阻:在 400 LFM 时为6.8°C/W 自然环境下的热电阻:19.6°C/W 材质:铝 材料表面处理:黑色阳极化处理 产品目录页面:2681 (CN2011-ZH PDF) 其它名称:294-1099 |
| 73743 | 功能描述:JACKET W/SNAPS BLUE 5XLARGE RoHS:否 类别:静电控制，ESD，无尘室产品 >> 衣物 系列:Statshield® 标准包装:1 系列:Statshield® 服装类型:外套，带袖套 尺寸:6XLarge 材质:聚酯 颜色:青色 特点:胯部带 4mm 卡钉，袖口带导电织物 |
发布紧急采购，3分钟左右您将得到回复。