- 您现在的位置：买卖IC网 > PDF目录10739 > 73M1903C-IM/F (Maxim Integrated Products)IC MODEM AFE MULTIREGIONAL 32QFN PDF资料下载
参数资料
| 型号： | 73M1903C-IM/F |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 2/48页 |
| 文件大小： | 0K |
| 描述： | IC MODEM AFE MULTIREGIONAL 32QFN |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 490 |
| 通道数： | 2 |
| 电压 - 电源，模拟： | 3 V ~ 3.6 V |
| 电压 - 电源，数字： | 3 V ~ 3.6 V |
| 封装/外壳： | 32-VFQFN 裸露焊盘 |
| 供应商设备封装： | 32-QFN（5x5） |
| 包装： | 管件 |
第1页当前第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页
73M1903C Data Sheet
DS_1903C_033
10
Rev. 5.0
2.2
Slave Mode and DAISY CHAIN
If the SCLK pin is externally pulled down to ground by a <4.7K
resistor, the 79M1903C device is in the
slave mode, after reset. In this mode of operation the serial clock (SCLK) and
FS are inputs to
79M1903C provided by the Master device. The serial clock input must be connected to OSCIN pin while
SCLK pin of 73M1903C is unconnected, except for the resistor connected to ground (see Figures 4 and
5). The 73M1903C PLL must be programmed to multiply the serial clock frequency by an appropriate
factor in order to obtain Fsys. Therefore the serial clock has to be continuous and without low frequency
jitter (the high frequency jitter is rejected by the 79M1903C PLL). The SckMode pin is not used since the
Master device provides
FS and serial clock.
Figure 4: 73M1903C Host Connection in Master and Slave Modes
SCLK
FS
OSCIN
SDIN
SDOUT
73M1903C
(Master)
SckMode
"1/0"
FS
SCLK
SDIN
SDOUT
MCLK
HOST
SCLK
FS
OSCIN
SDIN
SDOUT
73M1903C
(Slave)
FSBD
SCLK
FS
OSCIN
SDIN
SDOUT
73M1903C
(Slave)
FS
SCLK
SDIN
SDOUT
HOST
SCLK
FS
OSCIN
SDIN
SDOUT
73M1903C
(Slave)
FSBD
Daisy chain for Master/Slave mode
Daisy chain for Slave mode
(Slave)
(Master)
SckMode
TYPE
"x"
SckMode
TYPE
"x"
TYPE
"1/0"
SckMode
TYPE
"x"
"x" : don't care
Figure 5: 73M1903C Daisy Chaining for Master/Slave Mode and Slave Modes
In order to daisy chain two or more 73M1903C devices, the master must be programmed into hardware
controlled control frame mode by setting the HC bit (bit 0 in Register01) to 1, then set FSDEn (bit 3 in
Register06), and then set CkoutEn bit (bit 3 in Register01) to allow the
FSD to come through. The first
frame after enabling
FSD must be Data. For the two daisy chained devices, the data/control frames are
32 bits. The first 16 bits go to the first device; the next 16 bits go to the second device in the chain, as
timed by
FSD of the first device. For four daisy-chained devices, the data/control frames are 64 bits. The
first 16 bits go to the first device in the chain; the next 16 bits go to the second device in the chain as
started by
FSD of the first device, etc. FSD is always ”Late Type” frame sync.
SCLK
FS
OSCIN
SDIN
SDOUT
73M1903C
(Master)
SckMode
"1/0"
FS
SCLK
SDIN
SDOUT
MCLK
HOST
SCLK
FS
OSCIN
SDIN
SDOUT
73M1903C
(Slave)
SckMode
FS
SCLK
SDIN
SDOUT
HOST
73M1903C Master Mode
73M1903C Slave Mode
(Master)
(Slave)
TYPE
"1/0"
TYPE
"x"
"x" : don't care
相关PDF资料 |
PDF描述 |
|---|---|
| VI-23N-IW | CONVERTER MOD DC/DC 18.5V 100W |
| VI-23N-CV-B1 | CONVERTER MOD DC/DC 18.5V 150W |
| 73M1903-IVT/F | IC MODEM AFE V.22BIS 20-TSSOP |
| VI-23M-IW | CONVERTER MOD DC/DC 10V 100W |
| MAX5863ETM+ | IC AFE 8/10BIT 7.5MSPS 48-TQFN |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 73M1903C-IMR/F | 功能描述:电信线路管理 IC Modem Analog Front End RoHS:否 制造商:STMicroelectronics 产品:PHY 接口类型:UART 电源电压-最大:18 V 电源电压-最小:8 V 电源电流:30 mA 最大工作温度:+ 85 C 最小工作温度:- 40 C 安装风格:SMD/SMT 封装 / 箱体:VFQFPN-48 封装:Tray |
| 73M1903C-IMR/F1 | 功能描述:电信线路管理 IC RoHS:否 制造商:STMicroelectronics 产品:PHY 接口类型:UART 电源电压-最大:18 V 电源电压-最小:8 V 电源电流:30 mA 最大工作温度:+ 85 C 最小工作温度:- 40 C 安装风格:SMD/SMT 封装 / 箱体:VFQFPN-48 封装:Tray |
| 73M1903-EVM-600 | 功能描述:网络开发工具 73M1903 w/Ppu & 600 Ohm Term-Usa & Japan RoHS:否 制造商:Rabbit Semiconductor 产品:Development Kits 类型:Ethernet to Wi-Fi Bridges 工具用于评估:RCM6600W 数据速率:20 Mbps, 40 Mbps 接口类型:802.11 b/g, Ethernet 工作电源电压:3.3 V |
| 73M1903-EVM-ETSI | 功能描述:网络开发工具 73M1903 w/Etsi 203 Complex Imped. Term RoHS:否 制造商:Rabbit Semiconductor 产品:Development Kits 类型:Ethernet to Wi-Fi Bridges 工具用于评估:RCM6600W 数据速率:20 Mbps, 40 Mbps 接口类型:802.11 b/g, Ethernet 工作电源电压:3.3 V |
| 73M1903-EVM-WW | 功能描述:BOARD DEMO 73M1903 PPU WORLDWIDE RoHS:是 类别:编程器，开发系统 >> 评估演示板和套件 系列:- 产品培训模块:Obsolescence Mitigation Program 标准包装:1 系列:- 主要目的:电源管理，电池充电器 嵌入式:否 已用 IC / 零件:MAX8903A 主要属性:1 芯锂离子电池 次要属性:状态 LED 已供物品:板 |
发布紧急采购，3分钟左右您将得到回复。