A Dimensions: [mm]

B Recommended hole pattern: [mm]

D Electrical Properties:

Properties

Test conditions

Value

Unit

Tol.

Inductance

Rated current

DC Resistance

Rated voltage

Insulation test voltage

10 kHz/ 0.1 mA

@ 70°C

@ 20°C

50 Hz

50 Hz

L

IR

RDC

UR

UT

2x 3.3

5.0

2x 37.0

250

1500

mH

A

mΩ

V (AC)

V (AC)

±30%

max.

max.

max.

C Schematic:

E General information:

It is recommended that the temperature of the part does

not exceed +125°C under worst case conditions.

?Storage Temperature: -20°C to 60°C

?Operating Temperature: -40°C to 125°C

?Temperature Rise: < 55K

?Test conditions of Electrical Properties: 20°C, 33% RH

if not specified differently

DESCRIPTION

1.7

2014-01-09

SSt

SSt

1.6

2013-09-16

SSt

SBa

WE-CMBH Common Mode Power Line

1.5

1.4

2013-04-24

2013-01-22

SSt

SSt

SSt

SBa

Würth Elektronik eiSos GmbH & Co. KG

EMC & Inductive Solutions

Max-Eyth-Str. 1

Choke (Horizontal)

1.3

1.2

1.1

2012-12-05

2012-10-24

2012-06-28

SSt

SSt

SSt

SSt

SBa

SSt

74638 Waldenburg

Germany

Tel. +49 (0) 79 42 945 - 0

www.we-online.com

eiSos@we-online.com

Order.- No.

744834433

SIZE

A4

REV

DATE

BY

CHECKED

This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use.

Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before

the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.