- 您现在的位置：买卖IC网 > PDF目录360407 > 74AHC1G125 (NXP Semiconductors N.V.) Bus buffer/line driver; 3-state PDF资料下载
参数资料
| 型号： | 74AHC1G125 |
| 厂商： | NXP Semiconductors N.V. |
| 英文描述： | Bus buffer/line driver; 3-state |
| 中文描述： | 总线缓冲器/线路驱动器，三态 |
| 文件页数： | 13/16页 |
| 文件大小： | 74K |
| 代理商： | 74AHC1G125 |
2002 May 27
13
Philips Semiconductors
Product specification
2-input NAND gate
74AHC1G00; 74AHCT1G00
Suitability of surface mount IC packages for wave and reflow soldering methods
Notes
1.
For more detailed information on the BGA packages refer to the“(LF)BGA Application Note” (AN01026); order a copy
from your Philips Semiconductors sales office.
All surface mount (SMD) packages are moisture sensitive. Depending upon the moisture content, the maximum
temperature (with respect to time) and body size of the package, there is a risk that internal or external package
cracks may occur due to vaporization of the moisture in them (the so called popcorn effect). For details, refer to the
Drypack information in the “Data Handbook IC26; Integrated Circuit Packages; Section: Packing Methods”
These packages are not suitable for wave soldering. On versions with the heatsink on the bottom side, the solder
cannot penetrate between the printed-circuit board and the heatsink. On versions with the heatsink on the top side,
the solder might be deposited on the heatsink surface.
If wave soldering is considered, then the package must be placed at a 45
°
angle to the solder wave direction.
The package footprint must incorporate solder thieves downstream and at the side corners.
Wave soldering is suitable for LQFP, TQFP and QFP packages with a pitch (e) larger than 0.8 mm; it is definitely not
suitable for packages with a pitch (e) equal to or smaller than 0.65 mm.
Wave soldering is suitable for SSOP and TSSOP packages with a pitch (e) equal to or larger than 0.65 mm; it is
definitely not suitable for packages with a pitch (e) equal to or smaller than 0.5 mm.
2.
3.
4.
5.
6.
PACKAGE
(1)
SOLDERING METHOD
WAVE
REFLOW
(2)
BGA, LBGA, LFBGA, SQFP, TFBGA, VFBGA
HBCC, HBGA, HLQFP, HSQFP, HSOP, HTQFP, HTSSOP, HVQFN,
HVSON, SMS
PLCC
(4)
, SO, SOJ
LQFP, QFP, TQFP
SSOP, TSSOP, VSO
not suitable
not suitable
(3)
suitable
suitable
suitable
not recommended
(4)(5)
not recommended
(6)
suitable
suitable
suitable
相关PDF资料 |
PDF描述 |
|---|---|
| 74AHC1G126 | Bus buffer/line driver; 3-state |
| 74AHC1G14 | Inverting Schmitt trigger |
| 74AHC1G32 | 2-input OR gate |
| 74AHC1G66 | Bilateral switch |
| 74AHC1G79 | Quad 2-Input Positive-NAND Gates 14-SO -40 to 85 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 74AHC1G125_11 | 制造商:DIODES 制造商全称:Diodes Incorporated 功能描述:SINGLE BUFFER GATE WITH 3-STATE OUTPUT |
| 74AHC1G125DBVRE4 | 功能描述:缓冲器和线路驱动器 Single Bus Buffer RoHS:否 制造商:Micrel 输入线路数量:1 输出线路数量:2 极性:Non-Inverting 电源电压-最大:+/- 5.5 V 电源电压-最小:+/- 2.37 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:MSOP-8 封装:Reel |
| 74AHC1G125DBVRG4 | 功能描述:缓冲器和线路驱动器 Single Bus Buffer RoHS:否 制造商:Micrel 输入线路数量:1 输出线路数量:2 极性:Non-Inverting 电源电压-最大:+/- 5.5 V 电源电压-最小:+/- 2.37 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:MSOP-8 封装:Reel |
| 74AHC1G125DBVTE4 | 功能描述:缓冲器和线路驱动器 Single Bus Buffer RoHS:否 制造商:Micrel 输入线路数量:1 输出线路数量:2 极性:Non-Inverting 电源电压-最大:+/- 5.5 V 电源电压-最小:+/- 2.37 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:MSOP-8 封装:Reel |
| 74AHC1G125DBVTG4 | 功能描述:缓冲器和线路驱动器 Sgl Bus Buffer Gate RoHS:否 制造商:Micrel 输入线路数量:1 输出线路数量:2 极性:Non-Inverting 电源电压-最大:+/- 5.5 V 电源电压-最小:+/- 2.37 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:MSOP-8 封装:Reel |
发布紧急采购，3分钟左右您将得到回复。