- 您现在的位置：买卖IC网 > PDF目录369340 > 75425-EP (Texas Instruments, Inc.) POWER GOOD FAST-TRANSIENT-RESPONSE 2-A LOW-DROPOUT VOLTAGE REGULATORS PDF资料下载
参数资料
| 型号： | 75425-EP |
| 厂商： | Texas Instruments, Inc. |
| 元件分类： | 基准电压源/电流源 |
| 英文描述： | POWER GOOD FAST-TRANSIENT-RESPONSE 2-A LOW-DROPOUT VOLTAGE REGULATORS |
| 中文描述： | 电源良好快速瞬态响应2 -低压差电压调节器 |
| 文件页数： | 25/27页 |
| 文件大小： | 388K |
| 代理商： | 75425-EP |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页当前第25页第26页第27页
TPS75201-EP TPS75215-EP TPS75218-EP TPS75225-EP TPS75233-EP WITH RESET
TPS75401-EP
’
75415-EP
’
75418-EP
’
75425-EP
’
75433-EP WITH POWER GOOD
FAST-TRANSIENT-RESPONSE 2-A LOW-DROPOUT VOLTAGE REGULATORS
SGLS165
–
APRIL 2003
25
POST OFFICE BOX 655303
DALLAS, TEXAS 75265
THERMAL INFORMATION
thermally enhanced TSSOP-20 (PWP
–
PowerPad
) (continued)
If the system implements a TPS75233QPWPEP regulator, where V
I
= 5 V and I
O
= 800 mA, the internal power
dissipation is:
PD(total)
VI
VO
IO
(5
3.3)
0.8
1.36 W
(9)
Comparing P
D(total)
with P
D(max)
reveals that the power dissipation in this example does not exceed the calculated
limit. When it does, one of two corrective actions should be made: raising the power-dissipation limit by increasing
the airflow or the heat-sink area, or lowering the internal power dissipation of the regulator by reducing the input
voltage or the load current. In either case, the above calculations should be repeated with the new system
parameters.
mounting information
The primary requirement is to complete the thermal contact between the thermal pad and the PWB metal. The
thermal pad is a solderable surface and is fully intended to be soldered at the time the component is mounted.
Although voiding in the thermal-pad solder-connection is not desirable, up to 50% voiding is acceptable. The data
included in Figures 26 and 27 is for soldered connections with voiding between 20% and 50%. The thermal analysis
shows no significant difference resulting from the variation in voiding percentage.
Figure 29 shows the solder-mask land pattern for the
PWP package. The minimum recommended heat-
sink area is also illustrated. This is simply a copper
plane under the body extent of the package, including
metal routed under terminals 1, 10, 11, and 20.
Figure 29. PWP Package Land Pattern
Location of Exposed
Thermal Pad on
PWP Package
Minimum Recommended
Heat-Sink Area
相关PDF资料 |
PDF描述 |
|---|---|
| 75433-EP | POWER GOOD FAST-TRANSIENT-RESPONSE 2-A LOW-DROPOUT VOLTAGE REGULATORS |
| 75452 | DUAL PERIPHERAL DRIVERS |
| 75460 | PERIPHERAL DRIVERS FOR HIGH-VOLTAGE HIGH-CURRENT DRIVER APPLICATIONS |
| 75464 | PERIPHERAL DRIVERS FOR HIGH-VOLTAGE HIGH-CURRENT DRIVER APPLICATIONS |
| 755332-1 | Dual Low Offset, Low Power Operational Amplifier; Package: CerDIP; No of Pins: 8; Temperature Range: Military |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 75426 | 制造商:MOLEX 制造商全称:Molex Electronics Ltd. 功能描述:1.85 by 1.85mm (.073 by .073”) Pitch GbX* Backplane Connector System in 2, 3, 4 and 5-Pair Columns |
| 75426-0025 | 制造商:MOLEX 功能描述:GBX 4 PAIR DCARD ASSY. |
| 75426-0040 | 制造商:Woodhead Molex 功能描述: 制造商:Molex 功能描述: |
| 75426-0064 | 制造商:MOLEX 功能描述:GBX 4 PAIR LITE HYBRID DC |
| 75-4262 | 制造商:Datak Corporation 功能描述:Conn Modular Jack F 6/6 POS ST Wall Mount 12 Terminal 2 Port |
发布紧急采购，3分钟左右您将得到回复。