收藏本站
参数资料
型号： 7701G
厂商： Aavid Thermalloy
文件页数： 13/116页
文件大小： 0K
描述： BOARD LEVEL HEAT SINK
产品培训模块： How to Select a Heat Sink
标准包装： 500
类型： 顶部安装
冷却式包装： TO-220
固定方法： 夹
形状： 矩形
长度： 0.630"（16.00mm）
宽： 0.260"（6.60mm）
机座外的高度（散热片高度）： 0.433"（11.00mm）
材质： 不锈钢
其它名称： 033691
11
READING
A
T
HERMAL
PERFORMANCE
GR
APH
EUROPE
ASIA
Italy Tel: +39 051 764011 email: sales.it@aavid.com
United Kingdom Tel: +44 1793 401400 email: sales.uk@aavid.com
Singapore Tel: +65 6362 8388 email: sales@aavid.com.sg
Taiwan Tel: +886(2) 2698-9888 email: sales@aavid.com.tw
AMERICA
USA Tel: +1 (603) 224-9988 email: info@aavid.com
www.aavidthermalloy.com
The performance graphs you will see in this
catalog (see graph 579802) are actually a
composite of two separate graphs which
have been combined to save space. The small
arrows on each curve indicate to which axis
the curve corresponds. Thermal graphs are
published assuming the device to be cooled
is properly mounted and the heat sink is in
its recommended mounting position.
GRAPH A is used to show heat sink perform-
ance when used in a natural convection envi-
ronment (i.e. without forced air). This graph
starts in the lower left hand corner with the
horizontal axis representing the heat dissipa-
tion (watts) and the vertical left hand axis
representing the rise in heat sink mounting
surface temperature above ambient (°C). By
knowing the power to be dissipated, the
temperature rise of the mounting surface
can be predicted. Thermal resistance in natu-
ral convection is determined by dividing this
temperature rise by the power input (°C/W).
EXAMPLE A: Aavid Thermalloy part number
579802 is to be used to dissipate 3 watts of
power in natural convection. Because we are
dealing with natural convection, we refer to
graph “A”. Knowing that 3 watts are to be dis-
sipated, follow the grid line to the curve and
find that at 3 watts there is a temperature
rise of 75°C. To get the thermal resistance,
divide the temperature rise by the power
dissipated, which yields 25°C/W.
GRAPH B is used to show heat sink per-
formance when used in a forced convec-
tion environment (i.e. with forced air flow
through the heat sink). This graph has its
origin in the top right hand corner with
the horizontal axis representing air velocity
over the heat sink LFM* and the vertical
axis representing the thermal resistance of
the heat sink (°C/W). Air velocity is calculat-
ed by dividing the output volumetric flow
rate of the fan by the cross-sectional area
of the outflow air passage.
EXAMPLE B: For the same application
we add a fan which blows air over the heat
sink at a velocity of 400 LFM.
The addition of a fan indicates the use of
forced convection and therefore we refer
to graph “B”. This resistance of 9.50°C/W is
then multiplied by the power to be dissi-
pated, 3 watts. This yields a temperature
rise of 28.5°C.
CONVERTING VOLUME
TO VELOCITY
Although most fans are normally rated and
compared at their free air delivery at zero
back pressure, this is rarely the case in most
applications. For accuracy, the volume of
output must be derated 60%–80% for
the anticipation of back pressure.
EXAMPLE: The output air volume
of a fan is given as 80 CFM. The output area
is 6 inches by 6 inches or 36 in2 or 25 ft2.
To find velocity:
80
0.25
Velocity is 320 LFM, which at 80%,
derates to 256 LFM.
DESIGN ASSISTANCE
Aavid Thermalloy can assist in the design
of heat sinks for both forced and natural
convection applications. Contact us for help
with your next thermal challenge. For more
information, visit our web site at:
www.aavidthermalloy.com
Heat Dissipated—Watts
0
20
40
60
80
100
01
2
3
4
5
Mounting
Surface
Temp
Rise
Above
Ambient—
°
C
Air Velocity—Feet Per Minute
Thermal
Resistance
From
MTG
Surface
to
Ambient—
°
C/Watt
20
16
12
4
8
0
400
200
600
800
1000
GRAPH B
Velocity (LFM) =
Velocity =
= 320
Air Velocity—Feet Per Minute
Heat Dissipated—Watts
Thermal
Resistance
From
MTG
Surface
to
Ambient—
°
C/Watt
20
0
20
40
60
80
100
01
2
3
4
5
16
12
4
8
0
400
200
600
800
1000
Mounting
Surface
Temp
Rise
Above
Ambient—
°
C
GRAPH A
579802
Reading a Thermal Performance Graph
Velocity
(LFM)* = Volume (CFM)**
area (ft2)
* Linear feet per minute
** Cubic feet per minute
Volume (CFM)
area (ft2)
相关PDF资料
PDF描述
1-1393816-3 RELAY GEN PURPOSE DPST 5A 110V
V23054D1020F104 RELAY GEN PURPOSE DPDT 5A 24V
V23054D1019F104 RELAY GEN PURPOSE DPDT 5A 20V
5176372-2 CONN RCPT FH 60POS .050 VERT
5-5179010-9 CONN RCPT 180POS DL .8MM FH GOLD
相关代理商/技术参数
参数描述
7701GBM 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:Synchronous Buck Regulator with Internal Power MOSFETs
7701K1 制造商:Eaton Corporation 功能描述:SWITCH TOGGLE 3PDT 15A 250V 制造商:Eaton Corporation 功能描述:SWITCH, TOGGLE, 3PDT, 15A, 250V 制造商:Eaton Corporation 功能描述:SWITCH, TOGGLE, 3PDT, 15A, 250V; Contact Configuration:3PDT; Switch Operation:On-Off-On; Contact Voltage AC Nom:250V; Contact Current Max:15A; Actuator Style:Bat; Circuitry:3PDT; Contact Current AC Max:15A; Mounting Type:Panel ;RoHS Compliant: Yes
7701K2 制造商:Eaton Corporation 功能描述:SWITCH TOGGLE 3PDT 15A 250V 制造商:Eaton Corporation 功能描述:SWITCH, TOGGLE, 3PDT, 15A, 250V 制造商:Eaton Corporation 功能描述:SWITCH, TOGGLE, 3PDT, 15A, 250V; Contact Configuration:3PDT; Switch Operation:On-Off-On; Contact Voltage AC Nom:250V; Contact Current Max:15A; Switch Terminals:Screw; Actuator Style:Bat; Circuitry:3PDT; Contact Current AC Max:15A ;RoHS Compliant: Yes 制造商:Eaton Corporation 功能描述:Switch Toggle ON OFF ON 3PDT Round Toggle Screw 15A 600VAC 745.7VA Panel Mount with Threads
7701K3 制造商:Eaton Corporation 功能描述:SWITCH TOGGLE 3PDT 15A 250V 制造商:Eaton Corporation 功能描述:SWITCH, TOGGLE, 3PDT, 15A, 250V 制造商:Eaton Corporation 功能描述:SWITCH, TOGGLE, 3PDT, 15A, 250V; Contact Configuration:3PDT; Switch Operation:On-Off-On; Contact Voltage AC Nom:250V; Contact Current Max:15A; Switch Terminals:Spade; Actuator Style:Bat; Circuitry:3PDT; Contact Current AC Max:15A ;RoHS Compliant: Yes
7701MF 制造商: 功能描述: 制造商:undefined 功能描述:
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*