参数资料
型号: 78001-1244
厂商: Molex Connector Corporation
文件页数: 3/6页
文件大小: 0K
描述: CONN SOCKET MINIDIMM REV R/A SMD
产品目录绘图: miniDIMM Right Angle
标准包装: 1
系列: 78001
连接器类型: MiniDIMM
位置数: 244
存储器类型: DDR 2 SDRAM
标准: MO-244
安装类型: 表面贴装,直角
特点: 板导轨,锁存器
安装特点: 反向
包装: 托盘
触点表面涂层:
触点涂层厚度: 30µin(0.76µm)
产品目录页面: 513 (CN2011-ZH PDF)
其它名称: 078001-1244
078001-1244-E
0780011244
0780011244-E
78001-1244-E
780011244
780011244-E
WM23940
PRODUCT SPECIFICATION
5.2 MECHANICAL REQUIREMENTS
ITEM
5
DESCRIPTION
Vibration
TEST CONDITION
Amplitude : 1.52mm peak to peak
Sweep : 10-55-10 Hz in one min.
Duration : 2 hrs each on XYZ axis
Module weight: 15g for 244Ckt and 13g for
REQUIREMENT
No change in LLCR greater
than 10m ? from initial.
Discontinuity : No greater
than 1.0 micro sec.
200Ckt. EIA 364-28
6
7
8
Shock
(Mechanical)
Durability
Module Insertion
Force
(w/ Latches)
Mate connectors and shock at 30 g ’ s with half
-sine waveform for 11 milliseconds, 3 shocks
in each perpendicular axis (18 shocks total).
Module weighted : 15g for 244Ckt and 13g
for 200Ckt.
Mate and unmated connectors up to 25 cycles
at a maximum rate of 10 cycles per minute.
Reseating to be done for 3 cycles.
Insert a 1.00 mm thick Module(0.10x0.10 mm
chamfer) at a rate of 25 ± 6mm (1 ± inch)
per minute. See Sales drawing for PCB/
Module details.
No change in LLCR greater
than 10m ? from initial.
Discontinuity : No greater
than 1.0 micro sec.
No change in LLCR greater
than 10 m ? from initial.
Total insertion force not to
exceed :
195.0 N (43.73lbs) for 200 ckt
238.0 N (53.37lbs) for 244 ckt
Apply a pulling force on module card at a rate
9
Module Rip Out
Force
of 25 ± 6 mm/min. (1 ± ? inch) with
recommended test module as per sales
drawing, inserted into connector with latches
35.0 N (7.85lbs) min.
retention force of the module
in connector with no damage
closed.
10
11
12
Latch Actuation
Force
Latch Overstress
Force
Terminal
Retention Force
Apply an actuation force on each latch at a
rate of 25 ± 6 mm/ min (1 ± ? inch) with
recommended test module as per sales
drawing inserted into connector.
Apply an actuation force on each latch at a
rate of 25 ± 6 mm / min (1 ± ? inch) in the
fully open position.
Axial pullout force on the terminal in the
housing at a rate of 25 ± 6 mm (1 ± ? inch)
per minute.
The force to fully actuate the
latch open shall be 35 N
(7.85 lbs) max. per latch.
35 N (7.85 lbs) min force with
no damage.
3 N minimum
REVISION: ECR/ECN INFORMATION: TITLE:
Reverse Right Angle Mini DIMM, SMT
SHEET No.
B
EC No:
DATE:
S2007-1019
2007/05/17
Connector
200/244Ckt, 0.60mm Pitch
3 of 6
DOCUMENT NUMBER:
PS-78001-001
CREATED / REVISED BY:
CM TEO 2007/05/17
CHECKED BY:
YT YANG 2007/05/25
APPROVED BY:
SH LENI 2007/05/25
TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.1).DOC
相关PDF资料
PDF描述
78001-3344 CONN MINIDIMM DDR3 244PS R/A SMD
78065-8001 CONN DIMM DDR2 240POS PRESSFIT
78079-0001 CONN DIMM DDR3 240POS VERT PCB
78079-0011 CONN SOCKET DIMM 240POS 30GOLD
78121-0001 CONN SODIMM DDR3 204POS R/A SMD
相关代理商/技术参数
参数描述
78001-1344 功能描述:DDR3 / DDR2 / DDR 连接器 0.6mm Mini DIMM Rv s RA 0.76AuLF 244Ckt RoHS:否 制造商:Molex 产品类型:DIMM 系列:78588 节距:1 mm 位置/触点数量:240 安装风格:Through Hole 安装角:Vertical 外壳材料:Thermoplastic 触点材料:Copper Alloy 触点电镀:Gold 电压额定值:29 V 电流额定值:1 A 长度:
78001-2200 功能描述:DDR3 / DDR2 / DDR 连接器 .60MM MINIDIMM SCKT 2.5V RoHS:否 制造商:Molex 产品类型:DIMM 系列:78588 节距:1 mm 位置/触点数量:240 安装风格:Through Hole 安装角:Vertical 外壳材料:Thermoplastic 触点材料:Copper Alloy 触点电镀:Gold 电压额定值:29 V 电流额定值:1 A 长度:
78001-2244 功能描述:DDR3 / DDR2 / DDR 连接器 .60MM MINIDIMM SCKT 2.5V RoHS:否 制造商:Molex 产品类型:DIMM 系列:78588 节距:1 mm 位置/触点数量:240 安装风格:Through Hole 安装角:Vertical 外壳材料:Thermoplastic 触点材料:Copper Alloy 触点电镀:Gold 电压额定值:29 V 电流额定值:1 A 长度:
78001-3344 功能描述:DDR3 / DDR2 / DDR 连接器 0.6MM DDR3 MINIDIMM SKT 244P RRA SMT AU RoHS:否 制造商:Molex 产品类型:DIMM 系列:78588 节距:1 mm 位置/触点数量:240 安装风格:Through Hole 安装角:Vertical 外壳材料:Thermoplastic 触点材料:Copper Alloy 触点电镀:Gold 电压额定值:29 V 电流额定值:1 A 长度:
78001402 制造商:Laird Technologies Inc 功能描述:NOSG STR BF USF PSA