- 您现在的位置：买卖IC网 > PDF目录63649 > 7812SRH 1-OUTPUT DC-DC REG PWR SUPPLY MODULE PDF资料下载
参数资料
| 型号： | 7812SRH |
| 元件分类： | 电源模块 |
| 英文描述： | 1-OUTPUT DC-DC REG PWR SUPPLY MODULE |
| 文件页数： | 1/4页 |
| 文件大小： | 405K |
| 代理商： | 7812SRH |
DATEL, Inc., Manseld, MA 02048 (USA)
Tel: (508)339-3000, (800)233-2765 Fax: (508)339-6356 E–mail: sales@datel.com Internet: www.datel.com
78SR Series
3.3V/5V/12V Outputs
High-Efciency Switching
Regulators with LM78XX Pinouts
Features
3.3V/0.5A, 5V/0.5A or 12V/0.4A outputs; Pin and size-compatible
with LM7805 & LM7812 regulators
Up to 95% efciency– no heat sinks or thermal derating required!
Two SIP-packages t existing TO-220 footprints:
Vertical-pin models occupy less than 0.1 square in.
Optional horizontal pins provide 0.350 in. installed height
+7.5-36Vdc operating input range; Low 3mA quiescent current
Built-in lter capacitors–no external components required
–40 to +70°C operation at full load; Short-circuit protection
Excellent load (±0.2%) and line (±0.3%) regulation
Ideal for powering instrumentation from 9V/12V/24V/28V
supplies or batteries
Can be used with unregulated dc supplies
DATEL’s 7805SR (5V output), 7812SR (12V output) and
7803SR (3.3V output) step-down switching regulators are
modern drop-in replacements for older, inefcient, LM7805 and
LM7812 linear regulators. The 78XXSR's are pin- and size-
compatible with industry-standard TO-220 SIP packages. A
260kHz switching frequency provides for efciencies as high as
95%. Full-load (up to 0.5A) operation from 9V, 12V, 24V, or 36V
supplies at ambient temperatures up to +70°C requires no heat
sinks, no temperature derating, no forced-air cooling, and no
external capacitors.
78SR switching regulators provide many signicant
improvements over their linear counterparts: lower quiescent
current (3mA vs. 5 mA), higher input voltage (40V vs. 32V),
and better output accuracy (±1.5% vs. ±5%). All these features
combine to make 78SR regulators ideal for new or existing
LM7805 & LM7812 applications requiring full-load operation at
elevated voltages.
Technical Notes
1. Input/Output (I/O) Filtering: As shown in the noise and ripple graphs,
78SR switching regulators exhibit excellent low-noise performance with
no external I/O capacitors. However, if additional noise reduction is
required, be sure to use low-ESR capacitors that are rated for continu-
ous operation (with an additional 20% safety margin) at the highest
system voltages and temperatures. Adding external output capacitors
will also improve the unit’s load-transient response.
2. Input Fusing: 78SR switching regulators are not internally fused. If
fusing their input and/or output terminals is required, use the data
shown in the Efciency Curves as a guide to selecting an appropriate
slow-blow fuse.
3. Input-Output Isolation: 78SR regulators’ internal input and output
circuits share a common connection (GND, pin 2); there is no electrical
isolation between the INPUT (pin 1) and OUTPUT (pin 3) terminals.
4. Overvoltage Protection: 78SR switching regulators do not provide
input or output overvoltage protection. In the extremely rare situation
in which a catastrophic failure occurs, the output voltage may rise
to excessively high levels. If your load must be protected against
all possible overvoltage situations, external voltage-limiting circuitry
must be provided.
5. Operation at 40Vdc: Operating with inputs up to 40Vdc is permissible
if, for inputs between 36 and 40Vdc, the maximum load current is
reduced to 0.35A for 7805SR and 7803SR, and to 0.3A for 7812SR.
Under no circumstances should the input voltage be allowed to
exceed 45Vdc.
6. Soldering & Handling Precautions: All units are designed to be
hand soldered to pc-boards using no-clean solders (+260°C, 5 sec-
onds max.). Water-soluble solders can also be used, but the units
must be washed and dried using processes appropriate to the type of
solder employed. See the Mechanical Specications section for pin 1
orientation and recommended plated-through hole dimensions.
While 78SR regulators easily withstand a 2kV ESD discharge to any
terminal (using human body model), they should always be treated as
ESD sensitive devices.
7. Horizontal-Pin Models (78XXSRH): 78XXSRH switching regulators
are pin-compatible replacements for TO-220 style LM78XX linear reg-
ulators that are installed with their metal tabs lying at on the surface
of the pc-board. However, because the surface of inductor L1 on
78XXSRH models is electrically conductive, it must not be allowed to
come in contact with any exposed pc-board traces, other than power
ground (GND).
While the 2-mil-thick (0.05mm) polyester label attached to L1 provides
some degree of electrical insulation (only if L1 sits perfectly at on
the pc-board), it is recommended that a 0.020” (0.5mm) clearance be
maintained between L1 and all exposed pc-board traces.
Order online at www.datel.com
A SUBSIDIARY OF C&D TECHNOLOGIES
NEW
low-prole package
相关PDF资料 |
PDF描述 |
|---|---|
| 7805SR | 1-OUTPUT DC-DC REG PWR SUPPLY MODULE |
| 7803SRH | 1-OUTPUT DC-DC REG PWR SUPPLY MODULE |
| 7812SR | 1-OUTPUT DC-DC REG PWR SUPPLY MODULE |
| 7813S-1-051-E | INTERCONNECTION DEVICE |
| 781401CA | DUAL 2-CHANNEL, DBL POLE SGL THROW SWITCH, CDIP14 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 7812SRH-C | 功能描述:DC/DC转换器 15-36Vin 12Vout 0.4A Switching Regulator RoHS:否 制造商:Murata 产品: 输出功率: 输入电压范围:3.6 V to 5.5 V 输入电压（标称）: 输出端数量:1 输出电压（通道 1）:3.3 V 输出电流（通道 1）:600 mA 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:SMD/SMT 封装 / 箱体尺寸: |
| 7812UC | 制造商:Semiconductors 功能描述: |
| 7813 | 功能描述:端子 VERT .250X.032 HDRS RoHS:否 制造商:AVX 产品:Junction Box - Wire to Wire 系列:9826 线规:26-18 接线柱/接头大小: 绝缘: 颜色:Red 型式:Female 触点电镀:Tin over Nickel 触点材料:Beryllium Copper, Phosphor Bronze 端接类型:Crimp |
| 7813_10 | 制造商:BOURNS 制造商全称:Bourns Electronic Solutions 功能描述:SMD 3 mm Square Sealed Rotary Switch |
| 78130 SL001 | 功能描述:10 Conductor Multi-Conductor Cable Slate 24 AWG Foil 1000' (304.80m) 制造商:alpha wire 系列:EcoCable? Mini 零件状态:有效 电缆类型:多芯 导体数:10 线规:24 AWG 导线股数:19/36 导体材料:铜，镀锡 护套（绝缘）材料:聚苯醚（PPE） 护套（绝缘）直径:0.194"（4.93mm） 屏蔽类型:箔 长度:1000'（304.80m） 套管颜色:瓦色 等级:ISO 10993，UL 式 21460 特性:生物相容性，加蔽线，拉绳 电压:300V 工作温度:-40°C ~ 80°C 使用:- 导体绝缘:聚苯醚（PPE） 护套（绝缘）厚度:0.015"（0.39mm） 屏蔽材料:铝 屏蔽范围:1 标准包装:1 |
发布紧急采购，3分钟左右您将得到回复。