参数资料
| 型号： | 78M6613-EVM-1 |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 6/20页 |
| 文件大小： | 0K |
| 描述： | EVAL BOARD 78M6613 |
| 标准包装： | 1 |
| 系列： | * |
78M6613 Evaluation Board User Manual
UM_6613_045
1.3 Safety and ESD Notes
EXERCISE CAUTION WHEN LIVE AC VOLTAGES ARE PRESENT!
Standard ESD precautions must be taken when handling electronic equipment. The
78M6613 contains ESD protected interfaces.
Do not connect test equipment, ICE emulators or external development boards directly to the
78M6613 hardware. Damage to the 78M6613 and external equipment will occur due to the
78M6613’s “high side” reference topology. The 78M6613’s V3P3 (i.e., “high side”) is connected
directly to Neutral (Earth Ground) creating a ground reference disparity with any properly
grounded external equipment.
The board components and firmware settings are designed to operate with the following nominal AC
electrical ranges:
Voltage
110-240 VAC
Current
10 mA – 20A
Line Frequency
46-64 Hz
1.4 Firmware Demo Code Introduction
The Firmware Demo Code provides the following features:
?
?
Basic energy measurement data such as Watts, Volts, current, VAR, VA, phase angle, power factor,
accumulated energy, frequency, date/time, and various alarm statuses.
Control of alarm thresholds, calibration coefficients, temperature compensation, etc.
The following setup is used to facilitate performance evaluation between the user at the PC host and the
firmware code in the board:
?
The CLI through HyperTerminal or comparable terminal emulator on a different operating system. For
information about the CLI, see the applicable Firmware Description Document.
The 78M6613 is shipped with Firmware Demo Code Revision 1.0 or later loaded in the 78M6613 chip and
included on the CD. The code revision can be verified by entering the command >i via the command line
interface. Firmware for the Demo Unit can be updated using either the Teridian TFP2 or an in-circuit
emulator such as the Signum Systems ADM51 (www.signum.com ) .
1.5 Testing the 78M6613 Evaluation Board Prior to Shipping
Before every 78M6613 Evaluation Board is shipped, the following procedures have been performed at the
factory:
?
?
6
Full Calibration – Precise energy source equipment is used to calibrate the current and voltage. The
temperature is also calibrated at the same time.
Accuracy Test – This “bench” level test ensures the energy accuracy is within ± 0.5%.
Rev. 2
相关PDF资料 |
PDF描述 |
|---|---|
| 78M6613-SP-1 | EVAL KIT 78M6613-SP-1 |
| 78M6618-PDU1 | BOARD EVAL 78M6618 PDU1 |
| 78M6631-EVM-1 | EVAL BOARD 78M6631 |
| 78P2351R-DB | BOARD DEMO FOR 78P2351R |
| 79-WHITE-1"X60YD | TAPE GLASS CLOTH 1"X 60YD WHT |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 78M6613-IM | 制造商:TERIDIAN 制造商全称:TERIDIAN 功能描述:Single-Phase AC Power Measurement IC |
| 78M6613-IM/F | 功能描述:计量片上系统 - SoC Sgl Phase AC Pwr Measurement IC RoHS:否 制造商:Maxim Integrated 核心:80515 MPU 处理器系列:71M6511 类型:Metering SoC 最大时钟频率:70 Hz 程序存储器大小:64 KB 数据 RAM 大小:7 KB 接口类型:UART 可编程输入/输出端数量:12 片上 ADC: 安装风格:SMD/SMT 封装 / 箱体:LQFP-64 封装:Reel |
| 78M6613-IM/F/P | 制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:Single-Phase AC Power Measurement IC |
| 78M6613-IM/F/P48 | 功能描述:计量片上系统 - SoC 8-Bit Programmable Timing Element RoHS:否 制造商:Maxim Integrated 核心:80515 MPU 处理器系列:71M6511 类型:Metering SoC 最大时钟频率:70 Hz 程序存储器大小:64 KB 数据 RAM 大小:7 KB 接口类型:UART 可编程输入/输出端数量:12 片上 ADC: 安装风格:SMD/SMT 封装 / 箱体:LQFP-64 封装:Reel |
| 78M6613-IM/F/PE1 | 制造商:Maxim Integrated Products 功能描述: |
发布紧急采购，3分钟左右您将得到回复。