收藏本站
参数资料
型号： 78M6613-IMR/F/PW4
厂商： Maxim Integrated
文件页数： 6/33页
文件大小： 0K
描述： IC PWR MEASUREMENT 1PH AC 32SQFN
标准包装： 2,500
系列： Teridian™
输入阻抗： 40 千欧 ~ 90 千欧
测量误差： 0.5%
电压 - 高输入/输出： 2V
电压 - 低输入/输出： 0.8V
电流 - 电源： 9.1mA
电源电压： 3 V ~ 3.6 V
测量仪表类型： 单相
工作温度： -40°C ~ 85°C
安装类型： 表面贴装
封装/外壳： 32-VFQFN 裸露焊盘
供应商设备封装： 32-QFN 裸露焊盘（5x5）
包装： 带卷 (TR)
78M6613 Data Sheet
DS_6613_018
1.2
Analog Front End (AFE)
The AFE of the 78M6613 is comprised of an input multiplexer, a delta-sigma A/D converter and a
voltage reference.
1.2.1
Input Multiplexer
The input multiplexer supports up to four input signals that are applied to pins A0, A1, A2 and A3 of the
device. Additionally, using the alternate mux selection, it has the ability to select the on-chip
temperature sensor. The multiplexer can be operated in two modes:
?
?
During a normal multiplexer cycle, the signals from the A0, A2, A1, and A3 pins are selected.
During the alternate multiplexer cycle, the temperature signal (TEMP) is selected, along with the
signal sources shown in Table 1 .
The alternate mux cycles are usually performed infrequently (e.g. every second) by the MPU. Table 1
details the regular and alternative MUX sequences. Missing samples due to an ALT multiplexer
sequence are filled in by the CE.
Table 1: Inputs Selected in Regular and Alternate Multiplexer Cycles
Regular MUX Sequence
Mux State
ALT MUX Sequence
Mux State
0
A0
1
A1
2
A2
3
A3
0
TEMP
1
A1
2
V3P3D
3
A3
In a typical application, A1 and A3 are connected to current sensors that sense the current on each
branch of the line voltage. A0 and A2 are typically connected to voltage sensors through resistor
dividers. The multiplexer control circuit is clocked by CK32, the 32.768 kHz clock from the PLL block,
and launches with each new pass of the CE program.
1.2.2
A/D Converter (ADC)
A single delta-sigma A/D converter digitizes the voltage and current inputs to the 78M6613. The
resolution of the ADC is 22 bits. Conversion time is two cycles of the CK32 clock.
Initiation of each ADC conversion is controlled by the multiplexer control circuit as described previously.
At the end of each ADC conversion, the FIR filter output data is stored into the CE DRAM location.
1.2.3
FIR Filter
The finite impulse response filter is an integral part of the ADC and it is optimized for use with the
multiplexer. The purpose of the FIR filter is to decimate the ADC output to the desired resolution. At the
end of each ADC conversion, the output data is stored into the fixed CE DRAM location determined by
the multiplexer selection.
1.2.4
Voltage References
The device includes an on-chip precision bandgap voltage reference that incorporates auto-zero
techniques. The reference is trimmed to minimize errors caused by component mismatch and drift. The
result is a voltage output with a predictable temperature coefficient.
相关PDF资料
PDF描述
ISL9307IRTAAJBZ-T IC REG QD BCK/LINEAR SYNC 16TQFN
78M6613-IMR/F/PSU IC PWR MEASUREMENT AC 32SQFN
T95D336K025CZSL CAP TANT 33UF 25V 10% 2917
C1005X7R1A683K CAP CER 0.068UF 10V 10% X7R 0402
GSA06DTKH-S288 CONN EDGECARD 12POS .125 EXTEND
相关代理商/技术参数
参数描述
78M6613-PSU-1 功能描述:开发板和工具包 - 8051 78M6613 PSU Board RoHS:否 制造商:Silicon Labs 产品:Development Kits 工具用于评估:C8051F960, Si7005 核心: 接口类型:USB 工作电源电压:
78M6613-SOCKET32 功能描述:计量片上系统 - SoC 78M6613 32PIN QFN PROGRAM BOARD RoHS:否 制造商:Maxim Integrated 核心:80515 MPU 处理器系列:71M6511 类型:Metering SoC 最大时钟频率:70 Hz 程序存储器大小:64 KB 数据 RAM 大小:7 KB 接口类型:UART 可编程输入/输出端数量:12 片上 ADC: 安装风格:SMD/SMT 封装 / 箱体:LQFP-64 封装:Reel
78M6613-SP-1 功能描述:开发板和工具包 - 8051 Sgl Phase AC Pwr Measurement IC RoHS:否 制造商:Silicon Labs 产品:Development Kits 工具用于评估:C8051F960, Si7005 核心: 接口类型:USB 工作电源电压:
78M6618 制造商:TERIDIAN 制造商全称:TERIDIAN 功能描述:Octal Power and Energy Measurement IC
78M6618-IM 制造商:TERIDIAN 制造商全称:TERIDIAN 功能描述:Octal Power and Energy Measurement IC
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*