- 您现在的位置：买卖IC网 > PDF目录16278 > 78Q2123-DB (Maxim Integrated Products)BOARD DEMO 78Q2123 78Q2133 PDF资料下载
参数资料
| 型号： | 78Q2123-DB |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 36/38页 |
| 文件大小： | 0K |
| 描述： | BOARD DEMO 78Q2123 78Q2133 |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 1 |
| 系列： | * |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页当前第36页第37页第38页
DS_21x3_001
78Q2123/78Q2133 Data Sheet
Rev. 1.6
7
The received MLT-3 signal is converted to 5 bit NRZ code groups and output from the RX_ER and
RXD[3:0] pins, RX_ER being the MSB of the data output. The RX_DV and TX_EN pins are unused in
PCS Bypass mode.
1.3
10BASE-T OPERATION
1.3.1
10BASE-T Transmit
The 78Q2123/78Q2133 take 4-bit parallel NRZ data via the MII interface and passes it through a parallel
to serial converter. The data is then passed through a Manchester encoder, pre-emphasis pulse-shaper,
media filter, and finally to the twisted-pair line driver. The pulse-shaper and filter ensure the output
waveforms meet the voltage template and spectral content requirements detailed in Clause 14 of
IEEE-802.3. Interface to the twisted-pair media is through a center-tapped 1:1 transformer. No external
filtering is required. During auto-negotiation and 10BASE-T idle periods, link pulses are transmitted.
The 78Q2123/78Q2133 employ an onboard timer to prevent the MAC from capturing a network through
excessively long transmissions. When this timer expires, the chip enters the jabber state and
transmission is halted. The jabber state is exited after the MII goes idle for 500
±250 ms.
1.3.2
10BASE-T Receive
The 78Q2123/78Q2133 receive Manchester-encoded 10BASE-T data through the twisted pair inputs and
re-establishes logic levels through a slicer with a smart squelch function. The slicer automatically adjusts
its level after detection of valid data with the appropriate levels. Data is passed on to the CDR where the
clock is recovered, and the data is re-timed and decoded. From there, data enters the serial-to-parallel
converter for transmission to the MAC via the Media Independent Interface. Interface to the twisted-pair
media is through an external 1:1 transformer. Polarity information is detected and corrected within
internal circuitry.
1.3.3
Polarity Correction
The 78Q2123/78Q2133 are capable of either automatic or manual polarity reversal for 10BASE-T and
auto-negotiation functions. Register bits MR16.5 and MR16.4 control this feature. The default is
automatic mode where MR16.5 is low and MR16.4 indicates if the detection circuitry has inverted the
input signal. To enter manual mode, MR16.5 should be set high and MR16.4 will then control the signal
polarity.
1.3.4
SQE TEST
The 78Q2123/78Q2133 support the Signal Quality Error (SQE) function detailed in IEEE-802.3. At an
interval of 1
s after each negative transition of the TX_EN pin in 10BASE-T mode, the COL pin will go
high for a period of 1
s. SQE is not signaled during transmission after collision is detected. SQE is
automatically disabled when repeater mode is enabled. This function can be disabled through register bit
MR16.11.
1.3.5
Natural Loopback
When enabled, whenever the 78Q2123/78Q2133 are transmitting and not receiving on the twisted pair
media (10BASE-T Half Duplex mode), data on the TXD3-0 pins are looped back onto the RXD3-0 pins.
During a collision, data from the RXI pins is routed to the RXD3-0 pins. The natural loopback function is
enabled through register bit MR16.10. This feature is off by default.
1.3.6
Repeater Mode
When register bit MR16.15 is set, the 78Q2123/78Q2133 are placed in repeater mode. In this mode, full
duplex operation is prohibited, CRS responds only to receive activity and, in 10BASE-T mode, the SQE
test function is disabled.
相关PDF资料 |
PDF描述 |
|---|---|
| 78Q2120C09-DB | BOARD DEMO 78Q2120C |
| NCP301LSN45T1G | IC DETECTOR VOLTAGE 4.5V 5TSOP |
| MAX810TTRG | IC MPU SUPERVISORY 3.08V SOT23 |
| UCY2V101MHD3TN | CAP ALUM 100UF 350V 20% RADIAL |
| MAX5422EVKIT+ | KIT EVLAUTION MAX5422/23/24 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 78Q2123R/F | 功能描述:以太网 IC 10/100 Fast Ethernet MicroPHY RoHS:否 制造商:Micrel 产品:Ethernet Switches 收发器数量:2 数据速率:10 Mb/s, 100 Mb/s 电源电压-最大:1.25 V, 3.45 V 电源电压-最小:1.15 V, 3.15 V 最大工作温度:+ 85 C 封装 / 箱体:QFN-64 封装:Tray |
| 78Q2123R/F1 | 功能描述:以太网 IC RoHS:否 制造商:Micrel 产品:Ethernet Switches 收发器数量:2 数据速率:10 Mb/s, 100 Mb/s 电源电压-最大:1.25 V, 3.45 V 电源电压-最小:1.15 V, 3.15 V 最大工作温度:+ 85 C 封装 / 箱体:QFN-64 封装:Tray |
| 78Q2123S/F | 功能描述:1/1 Transceiver Full Ethernet 16-TQFN (5x5) 制造商:maxim integrated 系列:MicroPHY?? 包装:管件 零件状态:有效 类型:收发器 协议:以太网 驱动器/接收器数:1/1 双工:全 接收器滞后:- 数据速率:- 电压 - 电源:3.3V 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:16-WQFN 裸露焊盘 供应商器件封装:16-TQFN（5x5） 标准包装:60 |
| 78Q2123SR/F | 功能描述:1/1 Transceiver Full Ethernet 16-TQFN (5x5) 制造商:maxim integrated 系列:MicroPHY?? 包装:带卷（TR） 零件状态:有效 类型:收发器 协议:以太网 驱动器/接收器数:1/1 双工:全 接收器滞后:- 数据速率:- 电压 - 电源:3.3V 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:16-WQFN 裸露焊盘 供应商器件封装:16-TQFN（5x5） 标准包装:2,500 |
| 78Q2132 | 制造商:TDK 制造商全称:TDK Electronics 功能描述:1/10BASE-T HomePNA/Ethernet Transceiver |
发布紧急采购，3分钟左右您将得到回复。