参数资料
型号: 7G0IMX7G-15-15-8L-G
厂商: POWER-ONE INC
元件分类: 电源模块
英文描述: 2-OUTPUT 7 W DC-DC REG PWR SUPPLY MODULE
封装: 2 X 1 INCH, 10.50 MM HEIGHT, SMT-18
文件页数: 7/18页
文件大小: 299K
代理商: 7G0IMX7G-15-15-8L-G
Board Mountable
DC-DC Converters
IMX 7 Series
Edition 6/5.2000
15/18
90001
25.4
(1")
50.8 (2")
Measuring point of
case temperature
TC
10.5
(0.41")
1
Fig. 26
Surface mount version with PCB lid (option L)
Weight: <20 g
Safety and Installation Instructions
Installation Instruction
Installation of the DC-DC converters must strictly follow the
national safety regulations in compliance with the enclo-
sure, mounting, creepage, clearance, casualty, markings
and segregation requirements of the end-use application.
Connection to the system shall be made via a printed circuit
board according to:
Mechanical Data.
The units should be connected to a secondary circuit.
Check for hazardous voltages before altering any connec-
tions.
Do not open the module.
Ensure that a unit failure (e.g. by an internal short-circuit)
does not result in a hazardous condition. See also:
Safety
of operator accessible output circuit.
Input Fuse
To prevent excessive current flowing through the input sup-
ply line in case of a short-circuit across the converter input
an external fuse should be installed in a non earthed input
supply line. We recommend a fast acting fuse F2A for
20 IMX 7 and F1A for 40 IMX 7 and F0.63A for 70/110 IMX
7 types.
Cleaning Agents
In order to avoid possible damage, any penetration of
cleaning fluids has to be prevented, since the power sup-
plies are not hermetically sealed.
Standards and approvals
All DC-DC converters are pending to be UL recognized
according to UL 1950, UL recognized for Canada to CAN/
CSA C22.2 No. 950-95 and LGA approved to IEC/EN
60950 standards.
The units have been evaluated for:
Building in
Supplementary insulation input to output, based on their
maximum input voltage
The use in a pollution degree 2 environment
Connecting the input to a secondary circuit which is sub-
ject to a maximum transient rating of 1500 V for 20/40
IMX 7, 2000 V for 70 IMX 7 and 2500 V for 110 IMX 7
types.
The DC-DC converters are subject to manufacturing sur-
veillance in accordance with the above mentioned UL,
CSA, EN and ISO 9001 standards.
Protection Degree
The protection degree of the DC-DC converters is IP 30.
Fig. 25
Surface mount version with pins (option M)
Weight: <20 g
4.2 (0.17")
42.4 (1.67")
S09031
50.8 (2")
3.81(0.15")
5
x
3.81
(0.15")
3
x
5.08
(0.2")
0.8
× 1.2 (0.03 x 0.05") Pins
25.4
(1")
Measuring point of
case temperature
TC
11.0
(0.43")
1
4
10
14
相关PDF资料
PDF描述
70IMX7-03-9L 1-OUTPUT 7 W DC-DC REG PWR SUPPLY MODULE
70IMX7-24-9C2Z 1-OUTPUT 7 W DC-DC REG PWR SUPPLY MODULE
70IMX7-12-9C2 1-OUTPUT 7 W DC-DC REG PWR SUPPLY MODULE
70IMX7-1212-8XC 2-OUTPUT 7 W DC-DC REG PWR SUPPLY MODULE
70IMX7-1515-8XC 2-OUTPUT 7 W DC-DC REG PWR SUPPLY MODULE
相关代理商/技术参数
参数描述
7G14A-220M 制造商:Sagami Electric 功能描述:Class-D Power Inductor THT 14m
7G24 制造商:3M 制造商全称:3M Electronics 功能描述:3M? Connector for CFast? Card
7G24-B5A6-05 功能描述:记忆卡连接器 Ejectors CompactFlsh Push-Push RoHS:否 制造商:Yamaichi Electronics 产品:Card Connectors 卡类型:microSD 类型: 节距: 方向: 安装风格:SMD/SMT 端接类型: 排数: 触点数量: 电流额定值:0.5 A 电压额定值:50 V
7G24-B6A6-05 功能描述:记忆卡连接器 Ejectors CompactFlsh Push-Push RoHS:否 制造商:Yamaichi Electronics 产品:Card Connectors 卡类型:microSD 类型: 节距: 方向: 安装风格:SMD/SMT 端接类型: 排数: 触点数量: 电流额定值:0.5 A 电压额定值:50 V
7G24-B6A6-05-TS2330 功能描述:记忆卡连接器 EJCTR FOR CFAST CARD LEFT DUAL PUSH EJECT RoHS:否 制造商:Yamaichi Electronics 产品:Card Connectors 卡类型:microSD 类型: 节距: 方向: 安装风格:SMD/SMT 端接类型: 排数: 触点数量: 电流额定值:0.5 A 电压额定值:50 V