- 您现在的位置：买卖IC网 > PDF目录1180 > 8.07.00 JTAG ISOLATOR (Segger Microcontroller Systems)CONNECTOR JTAG-ARM ISOLATION PDF资料下载
参数资料
| 型号： | 8.07.00 JTAG ISOLATOR |
| 厂商： | Segger Microcontroller Systems |
| 文件页数： | 3/4页 |
| 文件大小： | 0K |
| 描述： | CONNECTOR JTAG-ARM ISOLATION |
| 标准包装： | 1 |
| 附件类型： | 隔离器 |
| 适用于相关产品： | J-Link |
| 产品目录页面： | 737 (CN2011-ZH PDF) |
| 其它名称： | 899-1003 |
User Manual for J-Link JTAG Isolator 3/4
Connecting the Isolator to Target and Emulator
Figure 3.
Connecting the Isolator to Target and Emulator
VCC
1
2
VCC
Isolator
Target
nTRST
TDI
3
5
4
6
GND
GND
J-Link
Flat cable
CPU
TMS
7
8
GND
TCK
9
10 GND
RTCK
TDO
11
13
12
14
GND
GND
Isolator
Target
GND
RESET
N/C
N/C
15
17
19
16 GND
18
20 GND
J-Link
Flat cable
CPU
The Emulator side of the Isolator is plugged directly into the Emulator. The
Target side is connected to the target via a 20-pin flat cable.
Using the Isolator with J-Link
In order to use the Isolator, follow these steps:
?
?
?
?
?
Plug the Isolator directly into J-Link.
Power J-Link.
Make sure the green LED on the emulator side is lit. If it is not, follow the
instruction in the next section.
Connect the target via 20-pin flat cable to the target side of the Isolator.
If the target is powered, the green LED on the target side should be lit.
The red LED on the target side is lit when a Target RESET is active (low).
Preparing J-Link to supply power
J-Link needs to supply 5V power to the emulator side of the adapter on pin 19.
In order to do this, you may have to configure J-Link once as follows:
?
?
?
?
Make sure that SEGGER J-Link software is installed on your machine.
It can be downloaded from http://www.segger.com/download_jlink.html
Start J-Link Commander, which can be found under “ Start -> Programs -
> SEGGER -> J-Link ARM ”
Enter the following command: power on perm
Plug in the adapter: The LED on the emulator side should now be lit.
Using the Isolator with an other ARM emulator
The Isolator has been designed for J-Link, but can also be used with other ARM
emulators with the same pin-out. In this case, you should make sure that 5V
are supplied to pin 19 of the emulator connector and that your emulator is not
damaged when applying 5V to this pin. Do this at your own risk!
? 2008 SEGGER Microcontroller GmbH & Co. KG
相关PDF资料 |
PDF描述 |
|---|---|
| 8-1393483-7 | CONN RCPT D-SUB 9POS VERT GOLD |
| 8-174682-7 | CONN D-PLUG FEM SCKT 68POS R/A |
| 8-5174682-7 | CONN D-PLUG FEM SCKT 68POS R/A |
| 80000000005 | FUSEHOLDER BODY 6.3X32MM PNL MT |
| 80001/816 | FUSEHOLDER 6.3X32MM 500V PNL MNT |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 80700P | 功能描述:SET SKT STD/DP 1/2DR 6PT 49PC SA 制造商:apex tool group 系列:* 零件状态:在售 标准包装:1 |
| 80701 | 制造商:SPACER 功能描述: |
| 8070-1004-07MT1226PA | 功能描述:环形MIL规格连接器 RoHS:否 制造商:Amphenol MIL 类型:MIL-DTL-5015 系列:97 产品类型:Receptacles 外壳大小:28 外壳类型:Potting 触点类型:Socket (Female) 位置/触点数量:14 插入安排:28-2 触点材料:Copper Alloy 触点电镀:Silver 安装角:Straight 安装风格:Wire 端接类型:Solder 电流额定值: |
| 8070-1004-07MT12-26PA | 制造商:Glenair Inc 功能描述:MILITARY ACCESSORY - Bulk |
| 8070-1004-07MT1226SA | 功能描述:环形MIL规格工具、五金与附件 MIGHTY MOUSE CONNECTOR RoHS:否 制造商:Amphenol Industrial MIL 类型:MIL-DTL-5015 系列:97 产品类型:Dummy Receptacles 用于:97 Series Plugs |
发布紧急采购，3分钟左右您将得到回复。