- 您现在的位置：买卖IC网 > PDF目录120927 > 800F/1 INTERCONNECTION DEVICE PDF资料下载
参数资料
| 型号： | 800F/1 |
| 元件分类： | 连接器件 |
| 英文描述： | INTERCONNECTION DEVICE |
| 文件页数： | 8/9页 |
| 文件大小： | 941K |
| 代理商： | 800F/1 |
ExchangeMAX SCS (Select Code 4346C)
3-83
Issue 3, Jun 1999
DS1,
CEPT-
1
,and
CEPT2
Jumper Wire
The recommended cross-connect wire for use with the Bantam
Plus – DSX System is five-conductor Y2-type wire. This wire
consists of two pairs (one for each direction of transmission) and a
fifth wire for cross-connecting the tracing lamp circuits. The wire
has tinned, 24-gauge (0.51 mm), dual-insulated conductors, with
irradiated PVC over semirigid PVC, for excellent toughness and
transmission characteristics. It is available either on spools or
coils.
For cross-connections requiring a single pair, use two-conductor
Y1-type wire. For example, when cross-connecting a maintenance
line to a Quasi-Random Signal Source (QRSS) fanout circuit.
Ordering Information
Cables
Two families of cable are recommended for connecting circuits to the DSX: the 1249C Series and the 600C Series.
1249C Cable
The 1249C is 26 AWG (0.40 mm) twisted pair with dual solid PE/
PVC insulation, an inner jacket or buffer, a dual aluminum-foil
shield with solid 24 AWG (0.51 mm) drain wire, and a PVC jacket.
The cable is recommended for all cable runs to the DSX up to 450
feet (137 m) and cross-aisle tie circuits between DSX lineups.
Space saving advantages are so significant, that with the 25 pair,
eight cables will fit into about the same space as four of the 600C
with foil shield or three of the earlier 600B with corrugated
aluminum shield. The 1249C Series cable is lighter weight and
easier to handle than either of the 600 Series. The transmission
characteristics include attenuation of 6.5 dB/1,000 feet (305 m) at
772 KHz and characteristic impedance of 100 ohms (nominal),
which makes it ideal for DS1. The cable comes in configurations
of 4 to 50 pairs and, as of this printing, has a UL-Type CMR listing
on all pair sizes except for the four pair which has a UL-Type CM
listing. There is also a plenum version of the cable available with
product code 2249C and a UL-Type CMP Listing.
1161A-Type Cable
For cable runs to the DIXI-1 greater than 450 feet (137 m) and up
to 565 feet (172 m), the 1161A cable family is recommended. The
1161A cable family is constructed with a 24 AWG (.51mm)
twisted pair with a HDPE insulation and a single aluminum/
polymer foil laminate shield with solid 24 AWG (.51 mm) drain
wire and a PVC jacket. The 1161A cable has 20% reduction in
cable diamater compaired to the 600C series cable of like pair
counts and a 25% reduction in the cable diameter compaired to the
600B cable of like pair counts. It is also lighter in weight and
easier to handle than either the 600 series cable families. Its
transmission characteristics include attenuation of 6.0 dB/100 feet
(305 m) at 772 kHz and a characteristic impedance of 100 ohms
(nominal). This product is UL Listed Type CMR and C(UL) CMG
75C for all pair sizes.
600C-Type Cable
The 600C-type cable is 22 AWG (0.64 mm) twisted pair with dual
solid PE/PVC insulation. The 600C cable has a dual aluminum foil
shield with solid 22 AWG drain wire and a PVC jacket. It is
significantly more flexible, lighter in weight, and is easier to
handle than the earlier 600B-type with corrugated aluminum
shield. Because of the larger gauge, its transmission characteristics
include attenuation of 4.1 dB/1,000 feet (305 m) at 772 kHz and
characteristic impedance of 100 ohms (nominal). Available in 6- to
32-pair configurations, the 600C cable has a UL-Type CMR listing
on pair sizes 25 to 32 and UL-Type CM listing on pair sizes 6 to
16. It is recommended for cable runs up to 655 feet (200 m). The
maximum length of a cable between the digital equipment and the
DSX is 655 feet (200 m). This is consistent with the range of
settings available on the equipment Line Build Outs. For runs
greater than 655 feet (200 m), Intra-Office Repeaters (IOR) are
required.
Ordering Information
Selected cable codes are provided in the following tables. All
Comcodes listed are for variable length packages (RVAR). This
allows the desired length to be ordered rather than requiring a
minimum order quantity. See the Electronic Wire and Cable
Catalog, Select Code 3807B, for further information.
Code
Description
Comcode
Y2-5C/24 S660
Five-conductor, 660-foot spool, four per box
105 271 209
CCW-P 1/24 S/1000
One pair, 1,000-foot spool
102 590 791
exmax.book : digital_2.fm Page 83 Wednesday, June 23, 1999 8:03 AM
相关PDF资料 |
PDF描述 |
|---|---|
| 800-014-CAZN6-4NN2A-72 | INTERCONNECTION DEVICE |
| 801-025-CC8ZN5-3PA-12 | INTERCONNECTION DEVICE |
| 801-025-DD8C10-26PA-12 | INTERCONNECTION DEVICE |
| 800-014-CAC12-37NN4A-72 | INTERCONNECTION DEVICE |
| 800-014-CAC12-37NS4B-72 | INTERCONNECTION DEVICE |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 800F-15YE112 | 制造商:ROCKWELL AUTOMATION 功能描述:800F ESTOP LEGEND 60MM |
| 800F224505-1 | 制造商:Methode Electronics Inc 功能描述: |
| 800F225505 | 制造商:Methode Electronics Inc 功能描述: |
| 800F-ALP | 制造商:Rockwell Automation / Allen-Bradley 功能描述:LATCH, PLASTIC |
| 800FB | 制造商:NUMONYX 制造商全称:Numonyx B.V 功能描述:Top / Bottom Boot Block 5 V Supply Flash Memory |
发布紧急采购，3分钟左右您将得到回复。