参数资料
| 型号： | 81030 |
| 厂商： | Desco |
| 文件页数： | 3/8页 |
| 文件大小： | 0K |
| 描述： | FINISH FLOOR STATFREE 55GAL |
| 标准包装： | 1 |
| 系列： | Statfree™ |
| 处理剂/清洁剂类型： | 抗静电地板涂层 |
| 使用： | 地板 |
| 技术规格： | 10&sup7; ~ 10&sup9;表面电阻系数 |
| 数量： | 55 加仑 |
| 包装： | 鼓 |
TB-2045 Page 3 of 8
using either a pH measurement instrument or a piece of pH
indicating litmus paper. A safe pH level will be between 7.0
(neutral) and 9.0 (mildly, alkaline). Two sources for litmus
paper are Micro Essential Laboratory, Brooklyn, NY 11210
or Fisher Scientific, Fair Lawn, New Jersey 07410.
Floor Finish Application
It is recommended that three coats of Statfree Floor Finish
are put down in the initial application.
Figure 5.
Statfree Dissipative Floor Finish
Item No. 81012, 2.5 gallon
Item No. 81013, 5 gallon
Item No. 81030, 55 gallon drum
Equipment needed:
Statfree Dissipative Floor Finish
Clean rayon (or cotton blend) mop dedicated to
Statfree use only
Clean bucket, and wringer dedicated to Statfree
use only
If Statfree freezes, allow it to thaw to 70°F before
application.
1. Always use in a well ventilated area or wear a suitable
respirator. Wear appropriate eye protection such as splash
goggles and impervious type protective gloves.
2. Pour Dissipative Floor Finish into a clean bucket. Apply
using a damp clean rayon or cotton mop. Make sure to use
a dedicated mop, do not use a mop that has been used
to strip or mop floors. Coat the floor uniformly, avoiding
excessive foaming.
3. Allow the first coat to dry for 60 minutes, then apply a
second coat. Do not use force air drying.
4. Repeat step 2 for the third coat.
5. Allow last coat to dry overnight or minimum of 6 hours
before permitting any kind of floor traffic on the newly
coated area. An overnight curing time is preferred.
DESCO WEST
- 3651 Walnut Avenue, Chino, CA 91710 (909) 627-8178 Fax (909) 627-7449
DESCO EAST
- One Colgate Way, Canton, MA 02021-1407 (781) 821-8370 Fax (781) 575-0172 Web Site: Desco.com
1. Always use in a well ventilated area or wear a suitable
respirator. Wear appropriate eye protection such as splash
goggles and impervious type protective gloves.
2. Sweep away all loose dirt and contaminants.
3. Dilute Statguard
Floor Stripper 3:1, Three (3) parts HOT
water to one (1) part stripper.
4. Apply stripper liberally to around 200 square foot area in
need of stripping. Using a clean string mop toapply diluted
stripper, uniformly distribute the solution. Let the solution
stand for 3 to 8 minutes. Do not allow it to dry.
5. Scrub the treated floor with the stripping machine at 175
rpm using a stripping pad soaked in stripping solution.
Figure 4. Stripping floor
6. Pick up the loosened floor finish using a wet vacuum or
mop. Repeat steps 3 and 4 as required.
7. Thoroughly rinse the floor two to three times with clean
water to remove all spent chemicals.
NOTE: If rinsing is not
completed thoroughly, the remaining chemicals will soften
new finish as it is applied, thereby diminishing its durability.
8. Pick up the rinse water with a wet vacuum or mop.
9. Inspect floor to be sure all stripper and old finish has
been removed. Allow floor to dry thoroughly before
applying any new floor finish.
For additional usage information and a MSDS sheet on
Desco Statguard Floor Stripper, ask for Technical Bulletin
It is recommended that the stripped surface be tested after
rinsing to ensure that high pH residues do not remain.
Some high pH strippers will leave a residue behind even
after several rinses. A high pH can affect the floor finish
curing time as well as other properties of the finish. To test
for high pH residue, test either the rinse water or the floor
2010 DESCO INDUSTRIES INC.
Employee Owned
相关PDF资料 |
PDF描述 |
|---|---|
| 82064 | VINYL ANTIFATIG GRY .375 36X60' |
| 82068 | RUBBER BLACK G2E4 .060 48X40' |
| 82082 | MAT STATFREE AFR RUBBER |
| 82101 | DISPOSABLE ESD MAT 14X22 |
| 8212 | TABLE MAT ESD BEIGE 2X4' |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 810300-0017 | 制造商:Seastrom Mfg 功能描述: |
| 8103-0106-40 | 功能描述:EMI 垫圈与接地垫 RoHS:否 制造商:Gore 长度:8 mm 宽度:2.5 mm 厚度:2.4 mm 产品类型:Pads |
| 810-30-13 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:KUGELROLLE ROBUST D 30.0MM |
| 81031 | 制造商:Brady Corporation 功能描述: |
| 8103-1 | 制造商:Amphenol RF 功能描述: 制造商:DAGE 功能描述: 制造商:TE Connectivity 功能描述: |
发布紧急采购，3分钟左右您将得到回复。