参数资料
| 型号： | 8203 FLOOR MAT |
| 厂商： | 3M |
| 文件页数： | 1/2页 |
| 文件大小： | 0K |
| 描述： | FLOOR MAT ESD GRAY 4X6' |
| 产品变化通告： | 8200 Series Material Change 22/Feb/2012 |
| 视频文件： | Anti-Fatigue Mat |
| MSDS 材料安全数据表： | 8200 Series MSDS |
| 标准包装： | 1 |
| 系列： | 8200 |
| 垫子类型： | 地面 |
| 形状： | 矩形 |
| 长度： | 6'（1.83m） |
| 宽： | 4'（1.22m） |
| 厚度： | 0.14"（3.56mm） |
| 颜色： | 灰 |
| 材质： | 乙烯基 |
| 特点： | 耗散 |
| 包括： | 接地软线（2），接地卡扣（2） |
| 其它名称： | 98079807875 SCP215 |
The basic purpose of conductive work surfaces is to
provide a surface that is free of static charge and also is
capable of removing the static charge from conductive
items placed on it. The total resistance to ground
determines the level of charge and rate at which it will be
drained. A resistance to ground of 1000 megohms or less is
required on an 8200 mat to drain a charge to a level of 100
volts or less in one second from a person or tote box
charged to 5KV (ref.1, 2).
Resistance Measurement:
Measuring the resistance of the mat requires a high voltage
megohmmeter. The megohmmeter must have a test voltage
of 50-100 volts and a meter range of 0-1000 megohms. The
ground lead of the megohmmeter is attached to the ground
points of the mat. The other lead of megohmmeter is
attached to an electrode that is described in both ASTM F
150 and NFPA 56A paragraph 4-6.2.7(b).
The resistance to ground should be greater than 106
ohms and less than 109 ohms. if the resistance is less than
106 ohms, an alternate path to ground has been established
which bypasses the one megohm resistor in the ground
cord. If the resistance is greater than 109 ohms, the ground
connection has been interrupted.
Cleaning:
Mats should be periodically cleaned with a detergent and
water solution. To reduce the possibility of leaving a
residue, detergents (rather than soaps) should be used.
Powdered detergents such as Tide, Ajax, etc. should be
added to water at a 1-2% concentration, liquid detergents
such as Wisk, All, etc. at a 2-3% concentration, and
general purpose cleaners such as 409, Mr. Clean, etc. can
be used full strength.
Normally, only a cloth that is thoroughly wetted with the
detergent solution is needed to wipe off the mat; however,
hardened stains may require brushing with a semirigid
bristled brush. The wiping or brushing action should be in a
circular motion to ensure removal of the particles from the
surface depressions. Extremely soiled mats may require
several repeated cleanings with a water rinse between each
cleaning. The water rinse should consist of wetting a cloth
with clean water and wiping the surface to remove loosened
dirt and detergent.
The final step should be to use a cloth dampened with
isopropanol and wipe the mat to remove any organic
contamination as well as the residual detergent. Avoid
using excessive isopropanol because the bottom foam layer
will absorb the solvent and cause the mat to swell.
Regardless of the technique used to clean the mats, the
previously described resistance measurement should be
performed to verify that the mat is functional.
Note: Read all Health Hazard, Precautionary, and First Aid
statements found in the Material Safety Data Sheet (MSDS)
and/or product label of cleaning materials prior to handling
or use.
Reference:
1.
D. M. Yenni, Jr. "Basic Electrical Considerations in
the Design of a Static-Safe Work Environment", Proc.,
(NEPCON/WEST), March 1979, pp. 273-284.
2.
J. R. Huntsman, D. M. Yenni, Jr., "Test Methods for
Static Control Products", Proc., EOS/ESD Symposium
1982, pp. 94-109.
Maintenance of Static Control
Systems 8200 Mats
Technical Brief – July, 1983
No. 113
3
Megohmmeter
Table
Mat
NFPA 56A
Electrode
Ground
Connection
相关PDF资料 |
PDF描述 |
|---|---|
| 432111-18-0 | TERM BARRIER 18CIRC 1 ROW .4375 |
| 431705-20-0 | TERM BARRIER 20CIRC 1 ROW .4375 |
| 431700-20-0 | TERM BARRIER 20CIRC 1 ROW .4375 |
| 431613-21-0 | TERM BARRIER 21CIRC 1 ROW .4375 |
| 431612-21-0 | TERM BARRIER 21CIRC 1 ROW .4375 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 820-3S | 制造商:Olympic Wire & Cable Corp 功能描述:ELECTRONIC PART |
| 8203-U1K-2 | 制造商:3M Electronic Products Division 功能描述:CONN FC 2.0MM CBL 2.0MMBLU BT 1000BULK |
| 8203Z | 制造商:SHURITE METERS 功能描述:Ammeter; 0 to 5 A; 5%; 2.5 in.; Polystyrene Cases with Metal Scales 制造商:SHURITE METERS 功能描述:Moving Iron Analog Panel Meter Meter Fun 制造商:SHURITE METERS 功能描述:CURRENT METER; Terminal Resistance Range:-; Meter Function:DC Amps; Meter Range:0A to 5A; Accuracy:5%; Connector Type:Ring/fork; Current Meter Range:0-5 DCA; Display Accuracy :5%; External Depth:1.99"; Meter Movement:Moving Magnet ;RoHS Compliant: NA |
| 8204 | 功能描述:防静电控制产品 ST CBL MNT BAG 0.3DB FC SNG SI MPLEX PL RoHS:否 制造商:3M Electronic Specialty 产品:Air Ionizers 类型:Mini 颜色: 大小:4.5 in x 3.3 in x 2 in |
| 820-4 | 制造商:JAMECO VALUEPRO 功能描述:Ul1007-1569 20 Awg Stranded Hook Up Wire 100 Feet Yellow |
发布紧急采购，3分钟左右您将得到回复。