参数资料
| 型号： | 8211 |
| 厂商： | 3M |
| 文件页数： | 1/2页 |
| 文件大小： | 0K |
| 描述： | TABLE MAT ESD BROWN 2X4' |
| 产品变化通告： | 8200 Series Material Change 22/Feb/2012 |
| 视频文件： | Anti-Fatigue Mat |
| MSDS 材料安全数据表： | 8200 Series MSDS |
| 标准包装： | 1 |
| 系列： | 8210 |
| 垫子类型： | 桌子，工作台 |
| 形状： | 矩形 |
| 长度： | 4'（1.22m） |
| 宽： | 2'（0.61m） |
| 厚度： | 0.14"（3.56mm） |
| 颜色： | 棕 |
| 材质： | 乙烯基 |
| 特点： | 耗散 |
| 包括： | 接地卡扣（2），腕带接地系统 |
| 相关产品： | SCP172-ND - WRIST STRAP & CORD - HIGH LAND SCP142-ND - WRIST STRAP ADJ 10' COILED CORD SCP141-ND - WRIST STRAP ADJ 5' COILED CORD |
| 其它名称： | 05400718363 8211 TABLE MAT 98079811992 SCP219 |
The basic purpose of conductive work surfaces is to
provide a surface that is free of static charge and also is
capable of removing the static charge from conductive
items placed on it. The total resistance to ground
determines the level of charge and rate at which it will be
drained. A resistance to ground of 1000 megohms or less is
required on an 8200 mat to drain a charge to a level of 100
volts or less in one second from a person or tote box
charged to 5KV (ref.1, 2).
Resistance Measurement:
Measuring the resistance of the mat requires a high voltage
megohmmeter. The megohmmeter must have a test voltage
of 50-100 volts and a meter range of 0-1000 megohms. The
ground lead of the megohmmeter is attached to the ground
points of the mat. The other lead of megohmmeter is
attached to an electrode that is described in both ASTM F
150 and NFPA 56A paragraph 4-6.2.7(b).
The resistance to ground should be greater than 106
ohms and less than 109 ohms. if the resistance is less than
106 ohms, an alternate path to ground has been established
which bypasses the one megohm resistor in the ground
cord. If the resistance is greater than 109 ohms, the ground
connection has been interrupted.
Cleaning:
Mats should be periodically cleaned with a detergent and
water solution. To reduce the possibility of leaving a
residue, detergents (rather than soaps) should be used.
Powdered detergents such as Tide, Ajax, etc. should be
added to water at a 1-2% concentration, liquid detergents
such as Wisk, All, etc. at a 2-3% concentration, and
general purpose cleaners such as 409, Mr. Clean, etc. can
be used full strength.
Normally, only a cloth that is thoroughly wetted with the
detergent solution is needed to wipe off the mat; however,
hardened stains may require brushing with a semirigid
bristled brush. The wiping or brushing action should be in a
circular motion to ensure removal of the particles from the
surface depressions. Extremely soiled mats may require
several repeated cleanings with a water rinse between each
cleaning. The water rinse should consist of wetting a cloth
with clean water and wiping the surface to remove loosened
dirt and detergent.
The final step should be to use a cloth dampened with
isopropanol and wipe the mat to remove any organic
contamination as well as the residual detergent. Avoid
using excessive isopropanol because the bottom foam layer
will absorb the solvent and cause the mat to swell.
Regardless of the technique used to clean the mats, the
previously described resistance measurement should be
performed to verify that the mat is functional.
Note: Read all Health Hazard, Precautionary, and First Aid
statements found in the Material Safety Data Sheet (MSDS)
and/or product label of cleaning materials prior to handling
or use.
Reference:
1.
D. M. Yenni, Jr. "Basic Electrical Considerations in
the Design of a Static-Safe Work Environment", Proc.,
(NEPCON/WEST), March 1979, pp. 273-284.
2.
J. R. Huntsman, D. M. Yenni, Jr., "Test Methods for
Static Control Products", Proc., EOS/ESD Symposium
1982, pp. 94-109.
Maintenance of Static Control
Systems 8200 Mats
Technical Brief – July, 1983
No. 113
3
Megohmmeter
Table
Mat
NFPA 56A
Electrode
Ground
Connection
相关PDF资料 |
PDF描述 |
|---|---|
| 430011-22-0 | TERM BARRIER 22CIRC 1 ROW .4375 |
| RZ03-1A4-D012 | RELAY GEN PURPOSE SPST 16A 12V |
| 325340-22-0 | TERM BARRIER 22CIRC SGL ROW .325 |
| 8213 | TABLE MAT ESD GRAY 2X4' |
| 60R135XMR | PTC 1.35A 60V RESETTBLE KINK AMO |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 8211- | 制造商:3M Electronic Products Division 功能描述:RESPIRATOR, DISPOSABLE, N95; Safety Category:NIOSH; Protection Class:N95; Respirator Type:Disposable |
| 8211 COUPLING | 功能描述:COUPLING F/OPTIC FC SM D-MOUNT RoHS:否 类别:连接器，互连式 >> 光纤 - 适配器 系列:- 产品变化通告:Product Obsolescence Notification 01/Apri/2010 标准包装:500 系列:- 类型:耦合器 转换源（适配器端）:POF 插座 转换到（适配器端）:POF 插座 单工/双工:单工 模式:- 安装类型:面板安装，闷头 环箍材料:- 特点:- 颜色:蓝 其它名称:516-1891HFBR-4515-NDQ2114296B |
| 8211 TABLE MAT | 制造商:3M Electronic Products Division 功能描述:STATIC DISSIPATIVE 3-LAYER RUNNER/TABLE 制造商:3M Electronic Products Division 功能描述:STATIC DISSIPATIVE 3-LAYER RUNNER/TABLE MAT, 4FT, Mat Type:Bench, Mat Color:Brown, Mat Material:Vinyl, Ground Terminals:Snap, Length:4ft, External Width:2ft, Thickness:0.138", Mat Features:Dissipative, Body Material:Vinyl , RoHS Compliant: NA |
| 8211 12"X33YD | 功能描述:OPTICALLY CLEAR ADHESIVE 制造商:3m 系列:* 零件状态:在售 标准包装:1 |
| 82110 | 功能描述:SET PLR SNAP RNG DBL X INT/EXT 2 制造商:apex tool group 系列:* 零件状态:在售 标准包装:4 |
发布紧急采购，3分钟左右您将得到回复。