- 您现在的位置：买卖IC网 > Datasheet目录949 > 8981-8882/HIGHGEL (3M)RIGID BODY CLOSURE KIT 8981 Datasheet资料下载
参数资料
| 型号： | 8981-8882/HIGHGEL |
| 厂商： | 3M |
| 文件页数： | 1/2页 |
| 文件大小： | 0K |
| 描述： | RIGID BODY CLOSURE KIT 8981 |
| 标准包装： | 10 |
| 系列： | 8980 |
| 类型： | 隐式闭合接头套件 |
| 缆线对数目： | 4 对 |
| 直径 - 内部： | 0.500"（12.7mm） |
| 长度 - 总体： | 7.20"（182.9mm） |
| 护套开口： | 1.50"（38.0mm） |
| 特点： | 高胶体 |
| 产品目录页面： | 367 (CN2011-ZH PDF) |
| 其它名称： | 3M9048 5111514653 51115146534 80611147754 89818882/HIGHGEL |
5.0
5.1
5.2
Closure Assembly
3M? Scotchcast? Kits 8981-
8986
Clean and scuff completely
around the cables sheath for
distances indicated using sheath
scuff.
8981 Closure
Secure one end of spacer web to
the cable with a cable tie. Spiral
wrap spacer web tightly around
splice bundle. Secure end to cable
with cable tie.
Clean and
Scuff 6" (152 mm)
Cable Tie
Spacer Web
Cable Tie
Clean and
Scuff 6" (152 mm)
Cable Tie
6.0
6.1
6.2
Note:
6.3
7.0
7.1
7.2
7.3
Closure Filling
Position closure:
8981-8983 kits: Slightly incline closure 1/2" (13 mm).
8984-8986 kits: Keep closure level.
Mix compound per instructions on Uni-pack container guard bag.
For health, safety and disposal information refer to compound label or
Material Safety Data Sheet for encapsulating compound being used.
Pour compound:
8981-8983 kits: Pour compound into closure through funnel on low end only.
Pour until compound fills closure and reaches top of funnel on lower end.
8984-8986 kits: Pour compound to top of air vents. Replace cover onto pour
opening. Closure can be buried immediately.
Re-entry of Re-enterable Compound Splice
Remove rubber tape strips from closure ends.
Grip or pry out closure end and pull closure off encapsulated splice.
Remove spacer web from splice and discard. DO NOT REUSE SPACER
3
Scotchcast ?
Splice Encapsulation
Kits 8980 Series
(with 3M ? High Gel
Encapsulating Compound or
3M ? Scotchcast ? Encapsulating
Compound 4407)
Spacer Web
WEB. Remove as much encapsulant as possible.
5.3
8982-8986 Closures
Install spacer web and secure in
place with cable ties.
Cable Ties
7.4
After completion of repair or modification, reassemble closure according
to procedure outlined in Closure Assembly section. Closure halves may be
reused.
Note:
Do not overlap spacer web.
Note:
Spacer web in roll form is available in 3"
(76 mm) and 6" (152 mm) x 20' (6 m) rolls (4430). Be sure that the
spacer web does not block the fill ports. Do not overlap spacer web.
5.4
5.5
Center the closure over the splice
opening. For 8981 and 8983
kits, position the bubbles over the
shield connectors.
Trim closure ends so that they
loosely fit on the cable outer
sheath.
Spacer Web
3M ? Scotchcast ? Kits 8981-8983
7.5
7.6
Note:
Fill closure with new encapsulant (high gel) as outlined in Closure Filling.
The new high gel encapsulant will bond to the original encapsulant left in the
splice.
Closure can be buried immediately.
3M ? Scotchcast ? Encapsulated Closures 4407 are not Re-enterable.
High Gel
3
Gel Time vs. Temperature
2
Gel Time
(Hours)
1
Important Notice
3M ? MS 2? splicing rigs, tools and modules are engineered to work together to achieve consistently superior
performance in the field. Modules from other manufacturers may not meet the tight quality tolerances of 3M
modules and may damage the calibration and performance of a 3M rig or tool. Therefore, the published 3M
warranty does not extend to any 3M modules spliced in rigs or tools not made by 3M. The warranty on 3M MS 2
splicing rigs and Scotchlok ? splicing tools can also be violated if used on non-3M modules.
Align the tongue and groove and
snap the closure halves together.
HINT: Pliers may be used to
5.6
5.7
5.8
3M ? Scotchcast ? Kits 8984-8986
Install closures.
NOTE TONGUE AND GROOVE
873512
snap the closure halves together,
but be sure that the tongue and
groove are properly engaged
before crimping the flanges.
Wrap the closure ends with DR or 23 rubber tape provided in the kit.
Install funnels on 3M? Scotchcast? Kits 8981-8983.
3
Communication Markets Division
3M Telecommunications
6801 River Place Blvd.
Austin, TX 78726-9000
800.426.8688
Fax 800.626.0329
www.3MTelecommunications.com
40°F
4°C
60°F 80°F 100°F
16°C 27°C 38°C
Ambient Temperature
Please recycle. Printed in USA
? 3M 2007. All rights reserved.
78-8097-8956-9-F
120°F
49°C
All statements, technical information, and recommendations related to 3M’s products are based on information
believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must
evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associ-
ated with such use. Any statements related to the product which are not contained in 3M’s current publications,
or any contrary statements contained on your purchase order shall have no force or effect unless expressly
agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of one (1) year from the time of
purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the war-
ranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or
refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any
indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of
the legal theory asserted.
January 2007
78-8097-8956-9-F
相关PDF资料 |
PDF描述 |
|---|---|
| 8F36-AAA105-0.50 | CABLE MINI SAS 36POS 0.5M |
| 8F68-AAG105-1.00 | CABLE TWINAX MINISAS 68POS 1M |
| 8G26-0A-CB1-00-1.00 | CABLE TWINAX MINISAS 26POS 1M |
| 8G26-8A-UB1-00-5.00 | CABLE TWINAX MINISAS/28AWG 5M |
| 8M26-AA0401-2.00 | CABLE MINI SAS 26POS 2M |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 898-18MMX55M | 制造商:3M Electronic Products Division 功能描述:Tape; 55 M; 18 mm; 380 lbs.-in. Width (6650 N/100 mm Width); 5% (Break) 制造商:3M Electronic Products Division 功能描述:70006248572 898 18 MM X 55 M B |
| 898-18MMX55M BOX | 功能描述:TAPE FILAMENT 18MM X 55M RoHS:是 类别:胶带，粘合剂 >> 带 系列:Scotch® 898 MSDS 材料安全数据表:2393 MSDS 标准包装:40 系列:Scotch® 2393 胶带类型:屏蔽，高温 胶合剂:橡胶 背衬，载体:绉纸 厚度:0.0076"（7.6 mils，0.193mm） 厚度 - 胶合剂:- 厚度 - 背胶，载体，衬垫:- 宽:1.42"（36.00mm） 长度:180'（55.0m）60 码 颜色:棕褐 使用:喷漆，自动 温度范围:325°F（163°C）- 30 分钟 包装:- 其它名称:000212007130330212007130370006165651 |
| 898-18MMX55M BULK | 功能描述:TAPE FILIMENT 18MMX55M RUBBER RoHS:是 类别:胶带，粘合剂 >> 带 系列:Scotch® 898 MSDS 材料安全数据表:2393 MSDS 标准包装:40 系列:Scotch® 2393 胶带类型:屏蔽，高温 胶合剂:橡胶 背衬，载体:绉纸 厚度:0.0076"（7.6 mils，0.193mm） 厚度 - 胶合剂:- 厚度 - 背胶，载体，衬垫:- 宽:1.42"（36.00mm） 长度:180'（55.0m）60 码 颜色:棕褐 使用:喷漆，自动 温度范围:325°F（163°C）- 30 分钟 包装:- 其它名称:000212007130330212007130370006165651 |
| 898-18mmx55m-6894 | 功能描述:胶带 898 18MMX55M BOX PN6894 RoHS:否 制造商:3M Electronic Specialty 产品:Tapes 类型:Shielding 描述/功能:EMI/RFI Foil Shielding Tape 颜色: 材料:Copper Foil 宽度:1 in x 18 yds |
| 898-18mmx55m-6897 | 功能描述:胶带 898 18 MMX55M BULK PN6897 RoHS:否 制造商:3M Electronic Specialty 产品:Tapes 类型:Shielding 描述/功能:EMI/RFI Foil Shielding Tape 颜色: 材料:Copper Foil 宽度:1 in x 18 yds |
发布紧急采购，3分钟左右您将得到回复。