参数资料
| 型号： | 9-1437514-5 |
| 厂商： | TE Connectivity |
| 文件页数： | 5/5页 |
| 文件大小： | 0K |
| 描述： | CONN SOCKET 1POS TIN |
| RoHS指令信息： | 9-1437514-5 Statement of Compliance |
| 标准包装： | 50,000 |
| 系列： | HOLTITE |
| Tail Type： | 无尾 |
| 端子： | 焊接 |
| 长度 - 总体： | 0.100"（2.54mm） |
| Accepts Pin Diameter： | 0.016" ~ 0.021" (0.41mm ~ 0.53mm) |
| 安装孔直径： | 0.044" (1.12mm) |
| 触点材料： | 铜铍 |
| 触点表面涂层： | 锡 |
| 包装： | 带卷 (TR) |
| Insertion Force： | 0.89Nm |
| 其它名称： | 322-HCS6P3-100 |
108-1979
4.
4.1.
QUALITY ASSURANCE PROVISIONS
Qualification Testing
A.
B.
Specimen Selection
Specimens shall be prepared in accordance with applicable Instruction Sheets and shall be
selected at random from current production. All test groups shall each consist of a minimum of 32
specimens.
Test Sequence
Qualification inspection shall be verified by testing specimens as specified in Figure 2.
4.2.
4.3.
4.4.
Rev B
Requalification Testing
If changes significantly affecting form, fit or function are made to the product or manufacturing process,
product assurance shall coordinate requalification testing, consisting of all or part of the original testing
sequence as determined by development/product, quality and reliability engineering.
Acceptance
Acceptance is based on verification that the product meets the requirements of Figure 1. Failures
attributed to equipment, test setup or operator deficiencies shall not disqualify the product. If product
failure occurs, corrective action shall be taken and specimens resubmitted for qualification. Testing to
confirm corrective action is required before resubmittal.
Quality Conformance Inspection
The applicable quality inspection plan shall specify the sampling acceptable quality level to be used.
Dimensional and functional requirements shall be in accordance with the applicable product drawing
and this specification.
Figure 3
Low level Contact Resistance Measurement Points
5 of 5
相关PDF资料 |
PDF描述 |
|---|---|
| 2026-15-A1 | GAS DISCHARGE TUBE 3 POLE |
| BK/MDQ-2 | FUSE 2A 250V T-LAG MDQ |
| 69190-130HLF | BERGSTIK II SR STRAIGHT RET |
| BK/MDQ-5 | FUSE 5A 250V T-LAG MDQ |
| 2026-09-A1 | GAS DISCHARGE TUBE 3 POLE |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 9-1437517-0 | 制造商:TE Connectivity 功能描述:PGM132-1A1414-L=PIN PACK SOCKE - Bulk |
| 9-1437517-7 | 制造商:TE Connectivity 功能描述:PGM181-1A1504-L=PIN PACK SOCKE - Bulk |
| 9-1437519-2 | 制造商:TE Connectivity 功能描述:PGM088-1A1327-L=PIN PACK SOCKE - Bulk |
| 9-1437519-6 | 制造商:TE Connectivity 功能描述:PGM088-1A1375-V=PIN PACK SOCKE - Bulk |
| 9-1437520-0 | 制造商:TE Connectivity 功能描述:PGM168-1A1711-V=PIN PACK SOCKE - Bulk |
发布紧急采购，3分钟左右您将得到回复。