- 您现在的位置：买卖IC网 > PDF目录16474 > 900337-000 (TE Connectivity)HEAT SHRINK TUBING PDF资料下载
参数资料
| 型号： | 900337-000 |
| 厂商： | TE Connectivity |
| 文件页数： | 3/6页 |
| 文件大小： | 0K |
| 描述： | HEAT SHRINK TUBING |
| 标准包装： | 400 |
| 系列： | RNF-100 |
| 类型： | 套管，弹性 |
| 收缩比率： | 2 至 1 |
| 内径 - 提供： | 0.750"（19.0mm） |
| 内径 - 恢复： | 0.374"（9.5mm） |
| 已恢复的墙壁厚度： | 0.030"（0.76mm） |
| 材质： | 聚烯烃 |
| 特点： | 阻燃剂，防液体 |
| 颜色： | 白 |
| 其它名称： | RNF-100-3/4-WH-FSP RNF-100-3/4-WH-FSP-ND |
SPECIFICATION RT-350 ISSUE 17
Page 3
4.3.1
Dimensions and Longitudinal Change
Measure three 6-inch (150 mm) specimens of tubing, as supplied, for length ± 1/32 inch
(± 1 mm) , and inside diameter in accordance with ASTM D 2671. Condition the specimens for 3 minutes in
a 200 ± 5°C (392 ± 9°F) oven, cool to 23 ± 3°C (73 ± 5°F) and then remeasure. Prior to and after
conditioning, the dimensions of the tubing shall be in accordance with Table 1 and the longitudinal change
shall be in accordance with Table 3. Calculate the longitudinal change as follows:
C =
L1 - L0
L0
x 100
Where:
C = Longitudinal Change [Percent]
L0 = Length Before Conditioning [Inches (mm) ]
L1 = Length After Conditioning [Inches (mm) ]
4.3.2
4.4
5.
5.1
5.2
5.3
Tensile Strength and Ultimate Elongation
Determine the tensile strength and ultimate elongation of the tubing in accordance with ASTM D 2671 using
1-inch (25-mm) bench marks, a 1-inch (25-mm) initial jaw separation, and jaw separation speed of 20 ± 2
inches (500 ± 50 mm) per minute.
REJECTION AND RETEST
Failure of any sample of tubing to conform to any one of the requirements of this specification shall be cause
for rejection of the lot represented. Tubing which has been rejected may be replaced or reworked to correct
the defects and resubmitted for acceptance. Before resubmitting, full particulars concerning previous
rejection and action taken to correct the defects shall be furnished to the inspector.
PREPARATION FOR DELIVERY
FORM
The tubing shall be supplied on spools or in lengths of 48 +1, -0 inches (1220 +25.4, -0 mm) unless
otherwise specified.
PACKAGING
Packaging shall be in accordance with good commercial practice.
MARKING
Each container of tubing shall be permanently and legibly marked with the size, quantity, manufacturer's
identification, specification number, and lot number.
If this document is printed it becomes uncontrolled. Check for the latest revision.
相关PDF资料 |
PDF描述 |
|---|---|
| ECA22DTKN-S288 | CONN EDGECARD 44POS .125 EXTEND |
| 6754399-3 | C/A,1.8MM,ZIP RIS,LC-LC(XG) |
| 1-5349580-3 | FOMM62.5 LEAD 2.5S TZ ST-SC DPX |
| L-14W18NJV4E | WIREWOUND INDUCTOR 18NH 0603 |
| GCM22DCBI-S189 | CONN EDGECARD 44POS R/A .156 SLD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 90-0339 | 制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:PACKAGE LAND PATTERN, (V1233N-1 / V1233N1) |
| 90034 | 制造商:TE Connectivity 功能描述:DAHT SH F CRIMP 22-20 - Bulk |
| 900345-000 | 制造商:TE Connectivity 功能描述:Hook-up Wire 制造商:TE Connectivity 功能描述:FLTWC0311-22-5 - Bulk |
| 900350 | 制造商:Weidmuller 功能描述: |
| 9003500000 | 功能描述:TOOL STRIPPER W/5 INSERTS 32-18A RoHS:是 类别:工具 >> 剥线器和配件 系列:- 标准包装:1 系列:- 类型:- 缆线类型:16~26 AWG 特点:- |
发布紧急采购，3分钟左右您将得到回复。