- 您现在的位置：买卖IC网 > Datasheet目录611 > 90227-1 (TE Connectivity)DAHT F CRIMP 20-24 Datasheet资料下载
参数资料
| 型号： | 90227-1 |
| 厂商： | TE Connectivity |
| 文件页数： | 3/4页 |
| 文件大小： | 0K |
| 描述： | DAHT F CRIMP 20-24 |
| 标准包装： | 1 |
| 系列： | Certi-Crimp |
| 工具类型： | 手动压接器 |
| 适用于相关产品： | 快速连接端子，20-24 AWG |
| 特点： | 侧面插入，棘齿 |
| 配用： | A27581CT-ND - CONN RECEPT FAST 20-24 AWG .250 A27581TR-ND - CONN RECEPT FAST 20-24 AWG .250 |
408-7379
Position Point on Center of Wire
Barrel Opposite Seam
1. Select a terminal and maximum size wire for the
hand tool.
2. Position the terminal and wire between the
crimping jaws, as described in Section 3,
CRIMPING PROCEDURE.
3. Holding the wire in place, squeeze the tool
handles together until the ratchet releases. Hold the
handles in this position, maintaining just enough
Modified ?
Anvil
“A"
±0.05 [+.002]
tension to keep the jaws closed.
4. Check the clearance between the bottoming
surfaces of the crimping jaws. If the clearance is
0.025 [.001] or less, the ratchet is satisfactory. If the
TERMINAL
NUMBER
61368
WIRE SIZE
AWG (Max.)
20
CRIMP HEIGHT
DIM. “A"
1.27 [.050]
clearance exceeds 0.025 [.001], the ratchet is out of
adjustment and must be repaired.
If the tool conforms to these inspection procedures,
lubricate it with a thin coat of any good SAE 20 motor
Figure 4
3. Using a crimp height comparator, measure the
wire barrel crimp height as shown in Figure 4. If the
crimp height conforms to that shown in the chart,
the tool is considered dimensionally correct. If not,
return the tool for evaluation and repair (refer to
Section 5, REPLACEMENT AND REPAIR).
For additional information concerning the use of the
crimp height comparator, refer to Instruction Sheet
408-7424.
C. Ratchet Inspection
Obtain a 0.025 [.001] shim that is suitable for checking
the clearance between the bottoming surfaces of the
crimping jaws. Proceed as follows:
Rev B
oil and return it to service.
5. REPLACEMENT AND REPAIR
The parts listed in Figure 5 are customer- replaceable.
A complete inventory can be stocked and controlled to
prevent lost time when replacement of parts is
necessary. Order replacement parts through your TE
representative, or call 1-800-526-5142, or send a
facsimile of your purchase order to 1-717-986-7605, or
write to:
CUSTOMER SERVICE (038-035) ?
TYCO ELECTRONICS CORPORATION ?
PO BOX 3608 ?
HARRISBURG PA 17105-3608
For customer repair service, call 1-800-526-5136.
6. REVISION SUMMARY
Revisions to this instruction sheet include:
? Changed company name and logo
3 of 4
相关PDF资料 |
PDF描述 |
|---|---|
| 90230-1 | DIE TYPE II P & S 69365 32-20 |
| 90243-1 | PNEU HD F CRIMP 18-22 |
| 90246-1 | FASTON HHHT PIDG 12-14 |
| 90247-1 | TOOL HAND CRIMP SAHT 14-20AWG |
| 90249-2 | DIE TYPE II CONTACTS 69875 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 902274002400000 | 制造商:AVX Corporation 功能描述:VARICON CONTACTS - Bulk |
| 902-275 | 功能描述:支架与垫片 Plastic Spcr .275 in Nylon White RoHS:否 制造商:Schurter 类型:Transipillar Spacers 长度:16 m 螺纹大小:M4 外径:10 mm 材料:Nylon with Steel 电镀:Zinc |
| 902276 | 制造商:Phoenix Contact 功能描述:TMC 62C 32A |
| 902279-00 | 制造商:FCI 功能描述: |
| 902-280 | 功能描述:支架与垫片 Plastic Spcr .28 in Nylon White RoHS:否 制造商:Schurter 类型:Transipillar Spacers 长度:16 m 螺纹大小:M4 外径:10 mm 材料:Nylon with Steel 电镀:Zinc |
发布紧急采购，3分钟左右您将得到回复。