- 您现在的位置：买卖IC网 > PDF目录19060 > 90754-1 (TE Connectivity)SEATING TOOL ASSY H.M. 125 PIN PDF资料下载
参数资料
| 型号： | 90754-1 |
| 厂商： | TE Connectivity |
| 文件页数： | 2/3页 |
| 文件大小： | 0K |
| 描述： | SEATING TOOL ASSY H.M. 125 PIN |
| 标准包装： | 1 |
| 系列： | * |
4. Position the seating tool onto the connector,
Power for seating tools must be provided by a
machine capable of supplying a downward force of
133 Newtons (N) [30 lb] per contact. SM–3 Frame
Assembly 814700–[ ] (Customer Manual 409–5626
provides instructions) can be used.
making sure that the tool is bottomed on the
housing floor.
5. Center the seating tool and connector under the
applicator ram of the tool. Slowly lower the ram
until it just meets the seating tool. Verify alignment
of the support fixture, pc board, connector, and
seating tool.
When setting up equipment to seat connectors, pay
particular attention to the following:
— The seating tool must be matched to the
connector
— The seating tool, connector, and applicator ram
must be properly aligned before cycling the tool
6. Cycle the tool to seat the connector in the pc
board. Then retract the ram, and carefully remove
the seating tool. Check to make sure that the
connector has been properly seated.
7. Repeat Steps 2 through 6 until all connectors
are seated.
1. Set seating height to the dimension shown in
Figure 2 (applicator shut height will equal the
seating height PLUS the combined thicknesses of
the pc board and pc board support fixture).
2. Position the connector onto pc board so that the
contacts (and alignment features) are properly
aligned to the pc board and support fixture.
3. Place the connector onto pc board until the
contacts are resting securely on, but have not fully
entered, the pc board.
Each seating tool is assembled and inspected before
shipment. It is recommended that the tool be
inspected immediately upon arrival at your facility to
ensure that the tool has not been damaged during
shipment.
Figure 2
相关PDF资料 |
PDF描述 |
|---|---|
| OPA83SM5BZ | LED IR RING 5V 850NM SMD |
| OPA83SM5AZ | LED IR RING 5V 850NM SMD |
| OPA82SM5DZ | LED IR RING 5V 850NM W/ALS SMD |
| LSP3-W-XXX | LIGHT ENG ARRAY 3X1W WHT 48MM |
| ASA-7.3738MHZ-L-T | OSC 7.3738 MHZ 3.3V SMD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 90754-2 | 制造商:TE Connectivity 功能描述:SEATING TOOL ASSY HM 110 PIN - Bulk |
| 90754-3 | 功能描述:手工工具 SEATING TOOL ASSY HM 95 PIN RoHS:否 制造商:Molex 产品:Extraction Tools 类型: 描述/功能:Extraction tool |
| 907-545 | 功能描述:支架与垫片 Plastic Spcr .545 in Nylon White RoHS:否 制造商:Schurter 类型:Transipillar Spacers 长度:16 m 螺纹大小:M4 外径:10 mm 材料:Nylon with Steel 电镀:Zinc |
| 90755 | 制造商:Harris Corporation 功能描述: |
| 907-550 | 功能描述:支架与垫片 Plastic Spcr .55 in Nylon White RoHS:否 制造商:Schurter 类型:Transipillar Spacers 长度:16 m 螺纹大小:M4 外径:10 mm 材料:Nylon with Steel 电镀:Zinc |
发布紧急采购，3分钟左右您将得到回复。