- 您现在的位置：买卖IC网 > PDF目录19196 > 90758-1 (TE Connectivity)PROCRIMPER III W/DIE 22-26 AWG PDF资料下载
参数资料
| 型号： | 90758-1 |
| 厂商： | TE Connectivity |
| 文件页数： | 3/5页 |
| 文件大小： | 0K |
| 描述： | PROCRIMPER III W/DIE 22-26 AWG |
| 标准包装： | 1 |
| 系列： | Pro-Crimper III，微型通用 MATE-N-LOK |
| 工具类型： | 手动压接器 |
| 适用于相关产品： | 矩形触点，22-26 AWG |
| 特点： | 侧面插入，棘齿 |
| 产品目录页面： | 425 (CN2011-ZH PDF) |
| 配用： | 170365-4-ND - CONN SOCKET 22-26AWG MINI-UMNL A97678-ND - CONN SOCKET 22-26AWG GOLD CRIMP A97676-ND - CONN PIN 22-26AWG M-U MNL GOLD A33327-ND - CONN PIN 22-26AWG GOLD CRIMP A33328-ND - CONN SOCKET 22-26AWG GOLD CRIMP A32014-ND - CONN SOCKET 22-26AWG GOLD CRIMP A32013-ND - CONN PIN 22-26AWG GOLD CRIMP A28811-ND - CONN SOCKET 22-26AWG GOLD CRIMP A28810-ND - CONN SOCKET 22-26AWG TIN CRIMP A28803-ND - CONN PIN 22-26AWG GOLD CRIMP 更多... |
| 其它名称： | 90758-1-ND A25584 |
408-9938
NOTE
i
NOT attempt to crimp an improperly positioned
contact.
NOTE
i
6. Tighten the nut and close the handles until the
ratchet releases.
7. Remove and inspect the contact.
8. Make another sample crimp. If the contact is
straight, tighten the contact support screw. If the
contact is still being bent during crimping, repeat the
adjustment procedure.
5. CRIMPING PROCEDURE
This tool is provided with a crimp adjustment
feature. Initially, the crimp height should be verified
as specified in Figure 4. Refer to Section 6, CRIMP
HEIGHT INSPECTION, and Section7, RATCHET
ADJUSTMENT, to verify crimp height before using
the tool to crimp desired contacts and wire sizes.
Refer to the table in Figure 1 and select wire of the
specified size and insulation diameter. Strip the wire to
the length indicated in Figure 1, taking care not to nick
or cut wire strands. Select an applicable contact and
identify the appropriate crimp section according to the
wire size markings on the tool. Refer to Figure 3 and
proceed as follows:
1. Hold the tool so that the back (wire side) is facing
you. Squeeze tool handles together and allow them
to open fully.
2. Holding the contact by the mating end, insert the
contact — insulation barrel first — through the front
of the tool and into the appropriate crimp section.
3. Position the contact so that the mating end of the
contact is on the locator side of the tool, and so that
the open “U” of the wire and insulation barrels face
the top of the tool. Place the contact up into the nest
so that the movable locator drops into the slot in the
contact. Refer to Figure 3. Butt the front end of the
wire barrel against the movable locator.
CAUTION Make sure that both sides of the insulation barrel
are started evenly into the crimping section. Do
!
4. Hold the contact in position and squeeze the tool
handles together until ratchet engages sufficiently to
hold the contact in position. Do NOT deform
insulation barrel or wire barrel.
5. Insert stripped wire into contact insulation and
wire barrels until it is butted against the wire stop, as
shown in Figure 3.
6. Holding the wire in place, squeeze tool handles
together until ratchet releases. Allow tool handles to
open and remove crimped contact.
The crimped contact may stick in the crimping area,
but the contact can be easily removed by pushing
downward on the top of the locator (see Figure 3).
7. Check the contact’s crimp height as described in
Section 6, CRIMP HEIGHT INSPECTION. If
necessary, adjust the crimp height as described in
Section 7, RATCHET (Crimp Height)
ADJUSTMENT.
Contact
Support
Locator
Adjustment Screw for
Contact Support
Back of Tool
(Wire Side)
Contact
(Typ)
Strip
Length
Wire
Rev D
Figure 3
Locator in
Wire Stop
Wire Inserted
to Stop
3 of 5
相关PDF资料 |
PDF描述 |
|---|---|
| YRS-859 | CRIMP TOOL STRIP FEED |
| 210-4MSFD | SWITCH RAISED ACTUATOR 4 SEC |
| 210-4LPSFD | SWITCH SPST 4 SEC LOW PROFILE |
| 210-4ESF | SWITCH EXTENDED ACTUATOR 4 SEC |
| 210-4MSF | SWITCH RAISED ACTUATOR 4 SEC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 90758-2 | 功能描述:冲压机与冲模 PROCRIMP DIE MINI UMNL RoHS:否 制造商:Souriau 大小: 产品:Dies 类型:Crimping 描述/功能: |
| 907-585 | 功能描述:支架与垫片 Plastic Spcr .585 in Nylon White RoHS:否 制造商:Schurter 类型:Transipillar Spacers 长度:16 m 螺纹大小:M4 外径:10 mm 材料:Nylon with Steel 电镀:Zinc |
| 907-590 | 功能描述:支架与垫片 Plastic Spcr .59 in Nylon White RoHS:否 制造商:Schurter 类型:Transipillar Spacers 长度:16 m 螺纹大小:M4 外径:10 mm 材料:Nylon with Steel 电镀:Zinc |
| 90759-1 | 功能描述:折皱器 PROCRIMP W/DIE TOOL MINI UNIV M-N-L RoHS:否 制造商:Hirose Connector 类型: 描述/功能:Cable and Shield Crimper |
| 90759-2 | 功能描述:冲压机与冲模 DIE 22-18 AWG RoHS:否 制造商:Souriau 大小: 产品:Dies 类型:Crimping 描述/功能: |
发布紧急采购，3分钟左右您将得到回复。