- 您现在的位置：买卖IC网 > PDF目录50372 > 90B08PT (GRAYHILL INC) SLIDE DIP SWITCH-8SWITCHES, SPST, LATCHED,0.1A, 6VDC, THROUGH HOLE-STRAIGHT PDF资料下载
参数资料
| 型号： | 90B08PT |
| 厂商： | GRAYHILL INC |
| 元件分类： | 开关 |
| 英文描述： | SLIDE DIP SWITCH-8SWITCHES, SPST, LATCHED,0.1A, 6VDC, THROUGH HOLE-STRAIGHT |
| 封装： | ROHS COMPLIANT |
| 文件页数： | 2/2页 |
| 文件大小： | 296K |
| 代理商： | 90B08PT |
DIP
Switches
Grayhill, Inc. 561 Hillgrove Avenue LaGrange, Illinois 60525-5997 USA Phone: 708-354-1040 Fax: 708-354-2820 www.grayhill.com
Ratings
76
78
90B
Mechanical Life: Operations per switch position
2,000
Make-and-break Current Rating: Operations
per switch position at these resistive loads
1 mA, 5 Vdc; 50 mA, 30 Vdc; or 150 mA, 30 Vdc:
2,000
—
10 mA, 30 Vdc; or 10 mA, 50 mVdc:
—
2,000
10 mA, 50 mVdc; or 25 mA, 24 Vdc; or 100 mA, 6 Vdc:
—
2,000
Contact Resistance: Initially:
≤ 30 m≤ 30 m≤ 20 m
After life, at 10 mA, 50 mVdc, open circuit:
≤ 100 m≤ 100 m≤ 100 m
Insulation Resistance:
Minimum, at 100 Vdc between adjacent closed
contacts and also across open switch contacts
Initially (Mohms):
5,000
After life (Mohms):
1,000
Dielectric Strength: Minimum voltage (AC,
RMS) measured between adjacent closed
contacts and also across open switch contacts.
lnitially:
750 V
500 V
After life:
500 V
Current Carry Rating: Maximum rise of 20°C
5 A
4 A
3 A
Switch Capacitance: At 1 megahertz
2 pF
Operating Temperature Range:
-40°C to + 85°C
Storage Temperature Range:
-55°C to + 85°C
SPECIFICATIONS: Standard Styles
Mechanical Ratings
Vibration Resistance: Per Method 204, Test
Condition B, 1 mS opening (10 mS allowed)
Mechanical Shock: Per Method 213, Test
Condition A. 1 mS opening (10 mS allowed)
Thermal Shock Resistance: Per specification;
no failures; passes contact resistance.
Terminal Strength: Per specification
Thermal Aging: 1,000 hours at 85°C; no failures.
Environmental Ratings
Meets all requirements of MIL- S-83504. Where
Grayhill performance is superior, the MIL spec is
listed in parentheses.
Moisture Resistance: Per MIL-STD-202,
Method 106.
Soldering Information
Series 90 MIDIP and Series 76 recessed rocker
(76RSB style) sealed switches have been tested
to EIA Standard RS-448-2. Similar performance
can be expected from other sealed Series 76
and 78 DIP switches.
Solderability: Per MIL-STD-202, Method 208
Resistance to Soldering Heat: 76RSB: Passes
EIA Standard using two, four, and six second
soldering time. 90: Per MIL-S-83504, six second
test.
Fluxing: Per EIA RS-448-2 with flux touching
switch body.
Cleaning: 76, 78 and 90 series tape sealed
products: Passes immersion test using water/
detergent. Acceptable solutions include 1-1-1
trichlorethane, freon, (TF, TE, or TMS), isopropyl
alcohol, detergent (140°F maximum). Terpene
acceptable for Series 90 only. Solutions which
are not recommended include acetone, methylene
chloride, freon TMC.
Materials and Finishes
Shorting Member (Ball): Brass, gold-plated
over nickel barrier.
Base Contacts: Copper alloy, gold-plated
over nickel barrier.
Terminals: Copper alloy, matte tin plated over
nickel barrier.
Non-Conductive Parts: Thermoplastic (UL94V-O)
Potting Material: Epoxy, 76,78 only.
Protective Cover: 76,78, only-Polycarbonate.
Tape Seal:
76, 78:
Polyester film
90:
Polyimide film
Tape Seal Integrity: Passes gross leak test
using 125°C flourinert for 20 seconds minimum.
Reference MIL-STD-202, Method 112.
MAX 260
°
255
°
230
°
150
°
Room
Temperature
120-150 sec.
60 sec.
5-10 sec.
REFLOW TEMPERATURE PROFILE:
Reflow
Soldering
Profile:
(260°C
Peak
Temperature)
Recommended Soldering Conditions:
WAVE SOLDERING: 260°C maximum solder temperature for 5 seconds max.
DIP
14
Thru-Hole DIP Switches
相关PDF资料 |
PDF描述 |
|---|---|
| 90B05PT | SLIDE DIP SWITCH-5SWITCHES, SPST, LATCHED,0.1A, 6VDC, THROUGH HOLE-STRAIGHT |
| 90B02PT | SLIDE DIP SWITCH-2SWITCHES, SPST, LATCHED,0.1A, 6VDC, THROUGH HOLE-STRAIGHT |
| 90B03PT | SLIDE DIP SWITCH-3SWITCHES, SPST, LATCHED,0.1A, 6VDC, THROUGH HOLE-STRAIGHT |
| 90B02T | SLIDE DIP SWITCH-2SWITCHES, SPST, LATCHED,0.1A, 6VDC, THROUGH HOLE-STRAIGHT |
| 90B06PT | SLIDE DIP SWITCH-6SWITCHES, SPST, LATCHED,0.1A, 6VDC, THROUGH HOLE-STRAIGHT |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 90B08S | 功能描述:SWITCH 8 POS DIP AUTODIP SEALED RoHS:否 类别:开关 >> DIP 系列:90B 特色产品:RDM Series Rotary DIP Switch 标准包装:70 系列:RDM 电路:十六进制 位置数:16 触点额定电压:0.1A @ 42VDC 触动器类型:用于工具旋转 触动器电平:凹槽式 安装类型:通孔 方向:顶部触动 可清洗:是 其它名称:EG4977-5RDMAR16PIT |
| 90B08SL | 制造商:Grayhill 功能描述:Switch DIP ON OFF SPST 8 Recessed Slide 0.15A 30VDC PC Pins 2000Cycle/SwitchCycle 2.54mm Thru-Hole Tube |
| 90B08SLT | 功能描述:SWITCH 8POS DIP AUTODIP SEALED RoHS:是 类别:开关 >> DIP 系列:90B 特色产品:RDM Series Rotary DIP Switch 标准包装:70 系列:RDM 电路:十六进制 位置数:16 触点额定电压:0.1A @ 42VDC 触动器类型:用于工具旋转 触动器电平:凹槽式 安装类型:通孔 方向:顶部触动 可清洗:是 其它名称:EG4977-5RDMAR16PIT |
| 90B08ST | 功能描述:SWITCH DIP AUTO SEALED 8POS RoHS:是 类别:开关 >> DIP 系列:90B 特色产品:RDM Series Rotary DIP Switch 标准包装:70 系列:RDM 电路:十六进制 位置数:16 触点额定电压:0.1A @ 42VDC 触动器类型:用于工具旋转 触动器电平:凹槽式 安装类型:通孔 方向:顶部触动 可清洗:是 其它名称:EG4977-5RDMAR16PIT |
| 90B08T | 功能描述:SWITCH 8POS DIP AUTODIP RoHS:是 类别:开关 >> DIP 系列:90B 特色产品:RDM Series Rotary DIP Switch 标准包装:70 系列:RDM 电路:十六进制 位置数:16 触点额定电压:0.1A @ 42VDC 触动器类型:用于工具旋转 触动器电平:凹槽式 安装类型:通孔 方向:顶部触动 可清洗:是 其它名称:EG4977-5RDMAR16PIT |
发布紧急采购，3分钟左右您将得到回复。