- 您现在的位置：买卖IC网 > Datasheet目录612 > 91104-1 (TE Connectivity)EXTRACTION TOOL Datasheet资料下载
参数资料
| 型号： | 91104-1 |
| 厂商： | TE Connectivity |
| 文件页数： | 1/2页 |
| 文件大小： | 0K |
| 描述： | EXTRACTION TOOL |
| 标准包装： | 1 |
| 系列： | * |
?
Extraction Tool 91104-1 ?
for Locking Clip Contacts
Instruction Sheet
408-7678
10 APR 12 Rev A
Dimensions in this instruction sheet are in metric
units [with U.S. customary units in brackets].
i
1. INTRODUCTION
NOTE
Figures are not drawn to scale.
Extraction Tool 91104-1 is designed to remove a
Detail A
Posts
Keep Tool
Parallel to
Contact
Hold Wire
Against Tool
locking clip contact from a .031x.062-in. printed circuit
(pc) board post or a locking clip connector (for
.031x.062-in. posts). See Figure 1. Read these
instructions thoroughly before extracting any contacts.
Reasons for reissue of this instruction sheet are
provided in Section 6, REVISION SUMMARY.
2. DESCRIPTION
This tool features a handle and a hooked tip for
extracting a contact from a post and a tapered tip ?
Contact
Spring
The tool must be kept parallel with the contact
!
for extracting a contact from a connector.
3. EXTRACTION
3.1. From Posts (See Figure 1, Detail A)
1. Align the hooked tip with the contact. .
2. Position the hooks under the contact spring, and
hold the wire against the tool.
3. Keeping the tool parallel with the contact, pull
straight up on the tool and wire. The contact should
extract easily.
CAUTION
being removed; otherwise, damage to the tool,
contact, and/or post may result. ?
3.2. From Connectors (See Figure 1, Detail B)
The connector must be removed from the posts
CAUTION
before using the extraction tool. ?
?
!
1. Align the tapered tip with the applicable tool slot
located on either side of the connector. Make sure
that the tapered side of the tool tip is facing the
contact to be removed.
2. Insert the tool through the connector until it
bottoms. The locking lance of the contact to be
removed should now be released.
3. Grip the wire of the contact to be removed, and
pull the contact straight out of the connector. The
contact should extract easily.
4. Remove the tool.
PC Board
Detail B
Connectors
Removed
from Posts
Tapered Side
of Tool Tip
Figure 1
Contact
Locking
Lance
Hooks of
Tool Tip
Wire of
Contact
to be
Removed
Tool
Slot
Posts on
PC Board
? 2012 Tyco Electronics Corporation, a TE Connectivity Ltd. company ?
All Rights Reserved
*Trademark
TOOLING ASSISTANCE CENTER 1-800-722-1111 ?
PRODUCT INFORMATION 1-800-522-6752
This controlled document is subject to change. ?
For latest revision and Regional Customer Service,
visit our website at www.te.com
1 of 2
TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product and/or company names may be trademarks of their respective owners.
相关PDF资料 |
PDF描述 |
|---|---|
| 91111-1 | EXT TOOL ZERO ENTRY |
| 911149-7 | MINI PRESS 050 120P |
| 91117-1 | TOOL CLINCHING |
| 91117-6 | TOOL CLINCHING |
| 91136-1 | TOOL EXTRACTION CONTACT DIN |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 911-045 | 功能描述:支架与垫片 Plastic Spcr .045 in Nylon White RoHS:否 制造商:Schurter 类型:Transipillar Spacers 长度:16 m 螺纹大小:M4 外径:10 mm 材料:Nylon with Steel 电镀:Zinc |
| 91-104508-03S | 制造商:Amphenol Aerospace 功能描述:PLUG |
| 91-104508-04S | 制造商:Amphenol Aerospace 功能描述:PLUG |
| 911-050 | 功能描述:支架与垫片 Plastic Spcr .05 in Nylon White RoHS:否 制造商:Schurter 类型:Transipillar Spacers 长度:16 m 螺纹大小:M4 外径:10 mm 材料:Nylon with Steel 电镀:Zinc |
| 911052 | 制造商:Solartron Metrology 功能描述:OD4 / LVDT, Bulk |
发布紧急采购，3分钟左右您将得到回复。