- 您现在的位置：买卖IC网 > Datasheet目录612 > 91136-1 (TE Connectivity)TOOL EXTRACTION CONTACT DIN Datasheet资料下载
参数资料
| 型号： | 91136-1 |
| 厂商： | TE Connectivity |
| 文件页数： | 5/11页 |
| 文件大小： | 0K |
| 描述： | TOOL EXTRACTION CONTACT DIN |
| 标准包装： | 1 |
| 工具类型： | 拔出工具 |
| 适用于相关产品： | 音频连接器触点 |
| 产品目录页面： | 432 (CN2011-ZH PDF) |
| 其它名称： | 91136-1-ND A25081 |
114- 10011
B. Crimp Length
For optimum crimp effectiveness, the crimp must be within the area shown in Figure 4. Effective crimp
length shall be defined as that portion of the wire barrel, excluding bellmouth(s), fully formed by the
crimping tool. Instructions for adjusting, repairing, and inspecting tools are packaged with the tools. See
Figure 10.
C. Bellmouths
Front and rear bellmouths shall be evident and conform to the dimensions given in Figure 4.
D. Cutoff Tab
The cutoff tab shall be cut to the dimensions shown in Figure 4.
E. Burrs
The cutoff burr shall not exceed the dimensions shown in Figure 4.
F. Wire Barrel Flash
The wire barrel flash shall not exceed the dimensions shown in Figure 4 in Section X--X.
G. Wire Location
After crimping, the wire conductor and insulation must be visible in the transition area between the wire
and insulation barrels.
H. Conductor Location
The conductor may extend beyond the wire barrel to the maximum shown in Figure 4.
I. Wire Barrel Seam
The wire barrel seam must be closed with no evidence of loose wire strands visible in the seam.
Conductor Extension
0.51 [.020] Max
Front Bellmouth
0.20 [.008] Max
Wire Barrel Seam
X
Wire Insulation and
Conductors Must Both
Be Visible in This Area
Effective Crimp Length
Rear Bellmouth
0.18-- 0.30 [.007-- .012]
No Damage or Distortion to the
Contact or the Locking Lance
X
Wire
Barrel Flash
Cutoff Tab Must Be
Visible - See View A
View A
Cutoff Tab 0.25
[.010] Max
0.13 [.005]
Max. Burr
Figure 4
0.25 [.010] Max.
Wire Barrel
Flash
Wire Barrel
Crimp Width
Section X- X
Wire Barrel
Crimp Height
Rev C
5 of 11
相关PDF资料 |
PDF描述 |
|---|---|
| 91144-1 | CONTACT EXTRACTION TOOL |
| 91156-1 | EXTRACTION TOOL |
| 91164-2 | AMPLIMITE INS TOOL 9 POS |
| 91178-1 | EXTRACTION/INSERTION TOOL |
| 91200-5 | FFC EXTRACTION TOOL |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 911362-US | 制造商:Solartron Metrology 功能描述:SI7500 Gauge Check Display Unit with Interface Built-in for 16 Solartron Digital Probes, Bulk |
| 911363 | 制造商:Weidmuller 功能描述:RSM 2; 24VAC DPDT 10A SKT -EA - Bulk 制造商:Weidmuller 功能描述:RSM 2 24VAC DPDT 10A SKT |
| 911365 | 制造商:Weidmuller 功能描述:RSM 4; 24VAC DPDT 10A SKT -EA - Bulk 制造商:Weidmuller 功能描述:RSM 4 24VAC DPDT 10A SKT |
| 911-365 | 功能描述:支架与垫片 Plastic Spcr .365 in Nylon White RoHS:否 制造商:Schurter 类型:Transipillar Spacers 长度:16 m 螺纹大小:M4 外径:10 mm 材料:Nylon with Steel 电镀:Zinc |
| 911367 | 制造商:Weidmuller 功能描述:RSM 8;24VAC;DPDT;SOCKET -EA - Bulk 制造商:Weidmuller 功能描述:RSM 8 24VAC DPDT SOCKET |
发布紧急采购，3分钟左右您将得到回复。