- 您现在的位置：买卖IC网 > PDF目录18601 > 91285-1 (TE Connectivity)INSERTION/EXTRACTION TOOL HDP-22 PDF资料下载
参数资料
| 型号： | 91285-1 |
| 厂商： | TE Connectivity |
| 文件页数： | 3/6页 |
| 文件大小： | 0K |
| 描述： | INSERTION/EXTRACTION TOOL HDP-22 |
| 标准包装： | 1 |
| 系列： | AMPLIMITE |
| 工具类型： | 插入/拔出工具 |
| 适用于相关产品： | D-Sub 端子 |
| 产品目录页面： | 431 (CN2011-ZH PDF) |
| 工具箱： | 5787054-1-ND - KIT MULTIPOSN HDP-20 WO/TOOL |
| 配用： | A23038DKR-ND - CONN PIN 22-26AWG GOLD CRIMP 6-66505-9-ND - CONN SOCKET 24-28AWG GOLD CRIMP 1-66569-0-ND - CONN SOCKET 18AWG SOLDER CUP 66570-8-ND - CONN PIN 18AWG SLD CUP GOLD 6-66506-1-ND - CONN PIN 20-24AWG GOLD CRIMP 7-66504-0-ND - CONN SOCKET 20-24AWG GOLD CRIMP A100812CT-ND - CONTACT PIN 20-24AWG CRIMP GOLD A100811CT-ND - CONTACT SKT 20-24AWG CRIMP GOLD 745229-5-ND - CONN PIN 18-22AWG GOLD CRIMP 66507-2-ND - CONN PIN CONTACT 24-28AWG 更多... |
| 其它名称： | A9979 |
408-9404
i NOTE The wire must be positioned inside the wire slot of the
i NOTE Contacts with tail lengths longer than 10.85 mm [.427
2. Slide thumb over the wire toward the end of the
tip.
NOTE
tip.
3. Slide tip over contact wire barrel until the tip butts
against the contact shoulder.
4. Align contact with the BACK of the contact cavity.
Push contact straight into the contact cavity until the
contact bottoms.
5. Remove the insertion tool; then pull back on the
wire to ensure that the contact is locked into the
contact cavity.
4.2. Extracting A Wire Crimped Contact (Figure 4)
1. Position tool handle between thumb and
fingertips, and align contact wire with the wire slot
on the tip. Hold wire in this position with your thumb.
2. Slide your thumb over the wire toward the end of
the insertion tip.
3. Place tip over the contact post or crimp barrel and
slide the tip straight into the contact cavity until the
tip bottoms against the contact shoulder.
4. Holding the wire tight against the tool handle, pull
back on the tool handle to extract the contact. If you
experience difficulty in extracting the contact, repeat
Steps 1 through 4.
4.3. Inserting A Posted Contact (Figure 5)
1. Place the contact in the contact cavity. Do NOT
push on the contact post.
2. Position the tip over the contact post. Move the
tool along the post until the tip butts against the
contact stabilizer. Align the tip on the stabilizer as
shown in Figure 5.
3. Hold the tool handle, and push the contact post to
make certain that the contact is locked in the cavity.
NOTE
in.] must use yellow color coded insertion tips.
i NOTE The wire must be positioned inside the wire slot of the
NOTE
tip.
Back of Receptacle
Connector 205439-1 (Ref)
Wire
Slide Extraction Tip Over
Contact Post or Crimp
Barrel
Rev D
Wire
Slot
Extraction Handle
Figure 4
3 of 6
相关PDF资料 |
PDF描述 |
|---|---|
| 636L3I077M76000 | OSCILLATOR 77.76 MHZ 3.3V SMD |
| 636L3I075M00000 | OSCILLATOR 75.0 MHZ 3.3V SMD |
| DME2S22K-F | CAP FILM 0.022UF 250VDC RADIAL |
| QYX2A333JTP | CAP FILM 0.033UF 100VDC RADIAL |
| EVU-E2AF25B14 | POT 10K OHM 9MM HORZ NO BUSHING |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 91285-1 | 制造商:TE Connectivity 功能描述:INSERTION/EXTRACTION TOOL |
| 912-855 | 功能描述:支架与垫片 Plastic Spcr .855 in Nylon White RoHS:否 制造商:Schurter 类型:Transipillar Spacers 长度:16 m 螺纹大小:M4 外径:10 mm 材料:Nylon with Steel 电镀:Zinc |
| 912857 | 制造商:Weidmuller 功能描述:SP-BLZ 270/6 W/BB6 BK AU BUL -EA - Bulk |
| 9128-5M | 制造商:PRO ELEC 功能描述:EXTENSION LEAD 1WAY 5M |
| 912-860 | 功能描述:支架与垫片 Plastic Spcr .86 in Nylon White RoHS:否 制造商:Schurter 类型:Transipillar Spacers 长度:16 m 螺纹大小:M4 外径:10 mm 材料:Nylon with Steel 电镀:Zinc |
发布紧急采购，3分钟左右您将得到回复。