- 您现在的位置：买卖IC网 > Datasheet目录613 > 91327-1 (TE Connectivity)SEAT TL 2MM HM UP SHLD TYPE F Datasheet资料下载
参数资料
| 型号： | 91327-1 |
| 厂商： | TE Connectivity |
| 文件页数： | 2/3页 |
| 文件大小： | 0K |
| 描述： | SEAT TL 2MM HM UP SHLD TYPE F |
| 标准包装： | 1 |
| 系列： | * |
408-4430
Damage to the pc board, seating tool, shield, or
!
3.2. Application Tooling
Power for the seating tool must be provided by an
application tool (with a ram) capable of supplying a
downward force of 89 N [20 lb] per contact.
Manual Electric Servo Presses (CMP 6T) 1585699-8
and (CMP 12T) 1585698-8, and Bench Top Electric
Servo Press (CBP 5T) 1585696-9 are available for this
seating tool. For information on the presses, visit the
press-fit assembly equipment website at ?
http://tooling.te.com/pressfit.asp .
4. SEATING
1. Set the seating height to the dimension shown in
height plus the combined thickness of the pc board
and pc board support fixture).
2. Position the support anvil, grooved side up, into
the pc board support fixture, and center it under the
ram of the application tooling. Position the pc board
with the receptacle over the support anvil.
3. Position the shield or receptacle (with integral
shield) onto the pc board so that the contacts are
properly aligned to the pc board and the support
4. Insert the contacts into the pc board until the
compliant lead section of the contacts are resting
securely on, but have not fully entered, the pc
board.
Note: View After Seating
Seating Height
(Shield or Receptacle with
Integral Shield Seated)
26.7+0.25/-0.00 mm
[1.050+.010/-.000 in.]
Applicator Shut Height
(Ram Fully Down)
(See Section 4, Step 1)
Contacts in PC Board Holes
and Aligned with Grooves in
Support Anvil
5. Position the seating tool onto the shield.
6. Center the seating tool and shield under the ram
of the application tooling; slowly lower the ram until
it just meets the seating tool. Verify the alignment of
the pc board support, pc board, connector, shield,
seating tool, and anvil.
CAUTION
receptacle may occur if the seating height is
improperly set, if the pc board is not properly
positioned over the support anvil, or if the seating
tool is not properly seated on the shield before
cycling the ram.
7. Cycle the ram according to instructions for the
application tooling. Check the assembly for proper
8. Remove the pc board with the seated shield or
receptacle (with integral shield), or re-position the
pc board and pc board support for seating additional
shields or receptacles (with integral shields).
5. MAINTENANCE AND INSPECTION
Inspect the seating tool and support anvil using ?
ensure that they have not been damaged during
shipment. Thereafter, regular inspections should be
performed by quality control personnel. Remove dust,
moisture, and other contaminants with a clean, soft
brush, or lint-free cloth. Do NOT use objects that could
damage parts. When not in use, store them in a clean,
dry area.
Note: Not to Scale
Applicator Ram (Fully Down) (Ref)
Seating Tool Centered Under Ram
and Bottomed on Shield or
Receptacle (with Integral Shield)
PC Board (Ref)
Support Anvil
PC Board Support Fixture (Ref)
Figure 2
Rev C
2 of 3
相关PDF资料 |
PDF描述 |
|---|---|
| 91333-1 | VS-3 HANDLE KIT |
| 91338-1 | 0.64 MM CONTACT PRO-CRIMPER |
| 91338-2 | TOOL HAND PRO CRIMPER 20-18AWG |
| 91346-1 | 2MM HM SEATING TOOL TYPE AB 25 |
| 91349-4 | SEATING TL HDR 4 PR 20 COL |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 913-273 | 制造商:SPC Multicomp 功能描述:CAPACITOR 2.2UF 100V |
| 913-275 | 功能描述:支架与垫片 Plastic Spcr .275 in Nylon White RoHS:否 制造商:Schurter 类型:Transipillar Spacers 长度:16 m 螺纹大小:M4 外径:10 mm 材料:Nylon with Steel 电镀:Zinc |
| 91-328 | 制造商:MA-COM 制造商全称:M/A-COM Technology Solutions, Inc. 功能描述:D.P.D.T. PUSH BUTTON SWITCH |
| 913280 | 制造商:Weidmuller 功能描述:FEM.INSERT HE.24 POL CRIMP -EA - Bulk |
| 913-280 | 功能描述:支架与垫片 Plastic Spcr .28 in Nylon White RoHS:否 制造商:Schurter 类型:Transipillar Spacers 长度:16 m 螺纹大小:M4 外径:10 mm 材料:Nylon with Steel 电镀:Zinc |
发布紧急采购，3分钟左右您将得到回复。