- 您现在的位置：买卖IC网 > PDF目录19179 > 91369-1 (TE Connectivity)PRO-C TL & DIE SL156 16 PDF资料下载
参数资料
| 型号： | 91369-1 |
| 厂商： | TE Connectivity |
| 文件页数： | 3/5页 |
| 文件大小： | 0K |
| 描述： | PRO-C TL & DIE SL156 16 |
| 标准包装： | 1 |
| 系列： | Pro-Crimper III, SL-156 |
| 工具类型： | 手动压接器 |
| 适用于相关产品： | 矩形触点，16 AWG |
| 特点： | 侧面插入，棘齿 |
| 配用： | 3-647485-1-ND - CONN RCPT HOODED CONTACT SL-156 647485-2-ND - CONN CONTACT 16AWG GOLD CRIMP |
| 其它名称： | Q3099740 |
contact is still being bent during crimping, repeat
the adjustment procedure.
1. Make a sample crimp and determine if the
contact is straight, bending upward, or bending
downward.
2. If adjustment is required, loosen the screw that
holds the contact support onto the locator
assembly.
Refer to the table in Figure 1 and select wire of the
specified size and insulation diameter. Strip the wire
to the length indicated in Figure 1, taking care not to
nick or cut wire strands. Select an applicable contact
and identify the appropriate crimp section according
3. Place a contact with wire into the proper nest
and close the tool handles until the ratchet reaches
the sixth click, or until the contact support touches
the contact.
4. Slightly loosen the nut that holds the locator
assembly onto the tool frame.
5. Move the contact support as required to
eliminate the bending of the contact.
6. Tighten the nut and close the handles until the
ratchet releases.
7. Remove and inspect the contact.
8. Make another sample crimp. If the contact is
straight, tighten the contact support screw. If the
to the wire size markings on the tool. Refer to
Figure 3 and proceed as follows:
1. Hold the tool so that the back (wire side) is
facing you. Squeeze tool handles together and
allow them to open fully.
2. Holding the contact by the mating end, insert the
contact — insulation barrel first — through the front
of the tool and into the appropriate crimp section.
3. Position the contact so that the mating end of
the contact is on the locator side of the tool, and so
that the open “U” of the wire and insulation barrels
face the top of the tool. Place the contact up into
the nest so that the movable locator drops into the
slot in the contact. Refer to Figure 3. Butt the front
end of the wire barrel against the movable locator.
Figure 3
相关PDF资料 |
PDF描述 |
|---|---|
| A6SR-4104 | SWITCH PIANO DIP 4POS SMD LONG |
| MMA5212W | IC ACCELER 120G X-AXIS 16QFN |
| 551-0401F | LED CBI 3MM DIN RED DIFF RA SGL |
| MMA5206WR2 | IC ACCELER 60G X-AXIS 16QFN |
| 91587-1 | SDE SAHT 18-22 MIC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 913692 | 功能描述:接线端子工具和配件 SI FORM C 5 A DIN 72581 RoHS:否 制造商:Phoenix Contact 产品:Tools & Accessories 类型:End Bracket |
| 91369-2 | 功能描述:冲压机与冲模 PRO-C DIE SL156 16 RoHS:否 制造商:Souriau 大小: 产品:Dies 类型:Crimping 描述/功能: |
| 913694 | 制造商:ERNI Electronics 功能描述:R96MABCVVV3-00EE2513.0*30FEP01* 制造商:ERNI Electronics 功能描述:913694 / R 96 M ABC VVV 3-00 EE25 / DIN M |
| 913-695 | 功能描述:支架与垫片 Plastic Spcr .695 in Nylon White RoHS:否 制造商:Schurter 类型:Transipillar Spacers 长度:16 m 螺纹大小:M4 外径:10 mm 材料:Nylon with Steel 电镀:Zinc |
| 913696 | 制造商:ERNI Electronics 功能描述:R96MABCVVV3-00EE2517.0*207EP01* 制造商:ERNI Electronics 功能描述:913696 / R 96 M ABC VVV 3-00 EE25 / DIN M |
发布紧急采购，3分钟左右您将得到回复。