- 您现在的位置：买卖IC网 > PDF目录18543 > 91907-1 (TE Connectivity)DIE SET #8 TRIAX PDF资料下载
参数资料
| 型号： | 91907-1 |
| 厂商： | TE Connectivity |
| 文件页数： | 2/4页 |
| 文件大小： | 0K |
| 描述： | DIE SET #8 TRIAX |
| 标准包装： | 1 |
| 系列： | Pro-Crimper III |
| 压接或电缆尺寸： | 尺寸 8 触点 |
| 压接手柄： | Tyco/AMP 354940-1 |
| 连接器类型： | ARINC |
| 配用： | 222191-4-ND - CONN SOCKET SIZE 8 ARINC 600 AU 222191-1-ND - CONN SOCKET SIZE 8 ARINC 600 AU 222190-1-ND - CONN PIN SIZE 8 ARINC 600 GOLD 222190-4-ND - CONN PIN TWINAX SIZE 8 GOLD 222191-5-ND - CONN SOCKET 8POS STR GOLD |
| 相关产品： | A9996-ND - PRO CRIMPER HAND TOOL W/O DIES |
| 其它名称： | Q3828573 |
9. To remove the die assembly from the tool frame,
close the tool handles until the ratchet releases,
remove the two die retaining screws and four die
retaining pins, and slide the dies out of the jaws.
1. Insert the crimped center contact into the
connector body until the cable dielectric butts
against the dielectric inside the connector body or
until the center contact is securely positioned
within the connector. Make sure that the braided
shield of the cable is over the support sleeve of the
connector body and that no strands from the shield
enter the connector body.
2. Slide the ferrule over the braided shield and
onto the connector until the ferrule butts against
the shoulder of the connector body.
3. Place the ferrule in the appropriate crimping
chamber of the anvil die so that the shoulder of the
connector body butts against the edge of the die.
1. Close the tool handles until the die assembly is
partially closed.
2. Assemble the center contact onto the center
conductor of the cable, and place the center
contact on the anvil in the smallest crimping
chamber. Make sure the flange on the end of the
center contact butts against the die.
3. Holding the cable in place, close the tool
handles until the ratchet releases.
4. Allow the tool handles to open fully and remove
the crimped center contact from the dies.
Figure 2
4. While holding the assembly together, close the
tool handles until the dies have closed enough to
secure the assembly in place.
5. Carefully close the tool handles until the ratchet
releases, then allow the tool handles to open fully,
and remove the crimped connector from the dies.
相关PDF资料 |
PDF描述 |
|---|---|
| B82721A2501N1 | COIL CHOKE 18MH 0.5A HORZ |
| 679301-1 | TOOL 22-10AWG SOLIS CRIMP HEAD |
| AML22CBS2EA | SWITCH PUSHBUTTON SPDT 3A 125V |
| AML22CBC2EA | SWITCH PUSHBUTTON SPDT 3A 125V |
| AML22JBJ3AD | SWITCH PUSHBUTTON DPDT 3A 125V |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 91907101 | 制造商:OKI Electric Industry Co Ltd 功能描述:OKI Microline 320 Turbo - Printer - monochrome - dot-matrix - Letter - 240 x 216 |
| 91907-2 | 功能描述:冲压机与冲模 PREM SDE DIE, ARINC #8 TRIAX RoHS:否 制造商:Souriau 大小: 产品:Dies 类型:Crimping 描述/功能: |
| 919073-000 | 制造商:TE Connectivity 功能描述:Shrink Boot Adapters 180 制造商:TE Connectivity 功能描述:TXR40AC00-1004AI - Bulk |
| 9-1907404-0 | 制造商:TE Connectivity 功能描述:C/A 12FIB XG OFNP/OFNR CLT MPO - Tape and Reel |
| 9-1907404-1 | 制造商:TE Connectivity 功能描述:C/A 12FIB XG OFNP/OFNR CLT MPO - Tape and Reel |
发布紧急采购，3分钟左右您将得到回复。