UniCam
MT-RJ Connectors
A LANscape
Solutions Product
Product Specifications
LAN-117-EN | Page 1
Applications
Local area networks (LANs), including main cross-connect,
intermediate cross-connect, horizontal cross-connect, direct
connect to electronics and workstation
Ideal for fiber-to-the-workstation applications where
installation setup and teardown time is critical
Small-form-factor, field-installable connectors
Description
With proven UniCam Connector technology, fiber
terminations are easy. The Corning Cable Systems’ patented,
high-precision mechanical splice technology enables fiber optic
networks to be installed quickly and cost effectively.
The patented Corning Cable Systems Continuity Test Set (CTS)
allows the installer to verify that the installation is performed
right, the first time, every time. Insert the fiber, rotate the
cam and watch the light change, giving you confidence in every
connector installed.
The UniCam MT-RJ Connector uses a RJ-latching
mechanism familiar to installers. Also, the MT-RJ is a small-
form-factor connector package that doubles the density
compared to standard SC connectors. Installation is as easy as
strip, clean, cleave, cam and crimp.
Features / Benefits
Fast termination, high installation yields and no
consumables means lowest installed cost
Continuity test set gives immediate go/no-go feedback of
successful termination
Quick installation: less than three minutes per connector
No epoxy, no polish
No need for electrical power for ovens or lights
Average insertion loss of 0.3 dB for multimode and
0.4 dB for single-mode
Factory-polished end-face for consistent optical
performance and factory-built quality
100 percent factory tested for insertion loss
100 percent guaranteed*
Reliable, proven technology with more than 40 million
connectors sold.
UniCam MT-RJ Multimode 62.5 μm Connector | LAN684
UniCam MT-RJ Connector Family | LAN688
*UniCam Connectors are guaranteed
to meet the published specifications at
the time of installation.