参数资料
型号: 935260795551
厂商: NXP SEMICONDUCTORS
元件分类: 微控制器/微处理器
英文描述: 8-BIT, MROM, 25 MHz, MICROCONTROLLER, PQFP44
封装: PLASTIC, QFP-44
文件页数: 11/43页
文件大小: 206K
代理商: 935260795551
2000 Feb 21
19
Philips Semiconductors
Product specication
Multiprotocol IC Card coupler
TDA8006
handbook, full pagewidth
MGR232
I/O
SS
RIU
CMDVCC
P4
FF
R/W
EN
INT
FSD
RBF
release reset
set start session
set CMDVCC
first start
read status
int cleared
anything
buffer full
read status
read character
and int cleared
reset start session
10.5 ETU
Fig.8 First character reception.
TRANSMISSION
Transmission mode is selected when TRN is HIGH.
If enabled, an interrupt occurs on the rising edge of TRN,
indicating that the transmission buffer is empty and ready
to accept a character for transmission. The interrupt is
cleared during the read status operation. The character is
written to the UTR on the falling edge of EN during the
write operation, and starts to be transmitted on the rising
edge of EN.
The I/O line is read at 10.84 ETU to check if the card has
detected a parity error. At the same time, bit TBE is set in
the USR, and, if enabled, an interrupt occurs to indicate
that the transmission buffer is empty, and that a new
character may be written. If the parity is correct, the
transmission of the next character will start at
12 ETU + GT + 0.5 ETU after the start bit of the previous
character (see Section “Extra guard time”). If the parity is
not correct, then assuming that a character has been
written to the UTR, the transmission starts at 13 ETU (the
guard time GT must be programmed before transmitting).
Bit LCT can be used for cards that are required to change
from transmission to reception mode very fast. If LCT is set
HIGH, then the UART automatically resets
bits TRN and LCT at 10.85 ETU if no parity error has
occurred; the UART is ready to receive a character from
the card at 12 ETU (T = 0) or 11 ETU (T = 1) after the
previous start bit. If a parity error has occurred during
transmission of the last character, then the UART stays in
transmission mode with LCT set, waiting for the software
to rewrite the corrupted character.
相关PDF资料
PDF描述
935260795518 8-BIT, MROM, 25 MHz, MICROCONTROLLER, PQFP44
935261236557 8-BIT, MROM, 25 MHz, MICROCONTROLLER, PQFP44
0745625001 CABLE ASSEMBLY, IPASS TO MINI SAS; Connector type A:iPass Mini SAS; Connector type B:SFF 8484 Right Angle with Sidebands; Length, lead:0.3m; Cable type:30AWG; Ways, No. of:36; Connector type:Mates with 75783, 75784; Current RoHS Compliant: Yes
0745627001 CABLE ASSEMBLY, IPASS, 0.3M; Connector type A:iPass Mini SAS; Connector type B:SFF 8482 with Sidebands; Length, lead:0.3m; Cable type:Shielded; Ways, No. of:36; Connector type:Mates with 75783, 75784; Current rating:1A; Voltage RoHS Compliant: Yes
935261511005 DATACOM, INTERFACE CIRCUIT, UUC15
相关代理商/技术参数
参数描述
935261069122 制造商:NXP Semiconductors 功能描述:IC SECURITY TRANSPONDER PLLMC
935262025112 制造商:NXP Semiconductors 功能描述:SUB ONLY IC
935262217118 制造商:NXP Semiconductors 功能描述:Real Time Clock Serial 8-Pin SO T/R
935264217557 制造商:NXP Semiconductors 功能描述:SUB ONLY IC
935267356112 制造商:NXP Semiconductors 功能描述:IC TEA1507PN