参数资料
型号: 935270057551
厂商: NXP SEMICONDUCTORS
元件分类: 微控制器/微处理器
英文描述: 4 CHANNEL(S), 5M bps, SERIAL COMM CONTROLLER, PQFP80
封装: 12 X 12 MM, 1.40 MM HEIGHT, PLASTIC, MS-026, SOT-315-1, LQFP-80
文件页数: 1/52页
文件大小: 680K
代理商: 935270057551
SC16C754
Quad UART with 64-byte FIFO
Rev. 02 — 14 March 2003
Product data
1.
Description
The SC16C754 is a quad universal asynchronous receiver/transmitter (UART) with
64-byte FIFOs, automatic hardware/software ow control, and data rates up to
5 Mbits/s (3.3 V and 5 V). The SC16C754 offers enhanced features. It has a
transmission control register (TCR) that stores receiver FIFO threshold levels to
start/stop transmission during hardware and software ow control. With the FIFO
RDY register, the software gets the status of TXRDY/RXRDY for all four ports in one
access. On-chip status registers provide the user with error indications, operational
status, and modem interface control. System interrupts may be tailored to meet user
requirements. An internal loop-back capability allows on-board diagnostics.
The UART transmits data, sent to it over the peripheral 8-bit bus, on the TX signal and
receives characters on the RX signal. Characters can be programmed to be 5, 6, 7, or
8 bits. The UART has a 64-byte receive FIFO and transmit FIFO and can be
programmed to interrupt at different trigger levels. The UART generates its own
desired baud rate based upon a programmable divisor and its input clock. It can
transmit even, odd, or no parity and 1, 1.5, or 2 stop bits. The receiver can detect
break, idle, or framing errors, FIFO overow, and parity errors. The transmitter can
detect FIFO underow. The UART also contains a software interface for modem
control operations, and has software ow control and hardware ow control
capabilities.
The SC16C754 is available in plastic LQFP80 and PLCC68 packages.
2.
Features
s Pin compatible with SC16C654IA68 and SC16C554IA68 with additional
enhancements
s Up to 5 Mbits/s baud rate (at 3.3 V and 5 V; at 2.5 V maximum baud rate is
3 Mbits/s)
s 64-byte transmit FIFO
s 64-byte receive FIFO with error ags
s Programmable and selectable transmit and receive FIFO trigger levels for DMA
and interrupt generation
s Software/hardware ow control
x Programmable Xon/Xoff characters
x Programmable auto-RTS and auto-CTS
s Optional data ow resume by Xon any character
s DMA signalling capability for both received and transmitted data
s Supports 5 V, 3.3 V and 2.5 V operation
s Software selectable baud rate generator
相关PDF资料
PDF描述
935269195112 8 I/O, PIA-GENERAL PURPOSE, PDSO16
935270020151 2 CHANNEL(S), 5M bps, SERIAL COMM CONTROLLER, PQFP48
935275617518 8 I/O, PIA-GENERAL PURPOSE, PDSO16
96W-NKR15HD-CW0 SINGLE COLOR LED, RED, 7.1 mm
96W-NKW12HD-NW0 SINGLE COLOR LED, WHITE, 7.1 mm
相关代理商/技术参数
参数描述
935270713557 制造商:NXP Semiconductors 功能描述:SUB ONLY IC CHP
935270792551 制造商:NXP Semiconductors 功能描述:IC BUFF DVR TRI-ST 16BIT 56VFBGA
935270792557 制造商:NXP Semiconductors 功能描述:IC BUFF DVR TRI-ST 16BIT 56VFBGA
935270793551 制造商:NXP Semiconductors 功能描述:IC BUS TRCVR 3-ST 16BIT 56VFBGA
935270793557 制造商:NXP Semiconductors 功能描述:IC BUS TRCVR 3-ST 16BIT 56VFBGA