参数资料
| 型号： | 9627-54-60 |
| 厂商： | 3M |
| 文件页数： | 3/4页 |
| 文件大小： | 0K |
| 描述： | ADHESIVE TRANSFER TAPE 54"X60YD |
| 标准包装： | 1 |
| 系列： | 9627 |
| 胶带类型： | 胶粘传输带 |
| 胶合剂： | Quick-Stick |
| 背衬，载体： | 玻璃纱布 |
| 厚度： | 0.0082"（8.2 mils，0.208mm） |
| 厚度 - 胶合剂： | 0.0050"（5.0 mils，0.127mm） |
| 厚度 - 背胶，载体，衬垫： | 0.0032"（3.2 mils，0.081mm） |
| 宽： | 54"（1.37m） |
| 长度： | 180'（55.0m）60 码 |
| 颜色： | 自然色 |
| 使用： | 通用 |
| 温度范围： | 70 ~ 100°F（21 ~ 38°C） |
| 包装： | 散装 |
| 其它名称： | 70-0067-0534-0 |
3M ? Adhesive Transfer Tape with Quick Bonding Adhesive 360
9626 ? 9627
Features
Application
Techniques
Environmental
Performance
Application Ideas
? Excellent adhesion to difficult to bond to surfaces such as HDPE, LDPE, and PP.
? Super quick stick.
? Higher adhesion from a thinner tape.
? Excellent solvent resistance.
? High temperature performance.
Bond strength is dependent upon the amount of adhesive-to-surface contact
developed. Firm application will assist the adhesive in developing intimate contact
with the bonding surface. To accelerate the adhesion process, additional heat, up to
130°F (54°C), may be used.
To obtain optimum adhesion, the bonding surfaces must be clean, dry, and well
unified. Some typical surface cleaning solvents are isopropyl alcohol or heptane. *
Ideal tape application temperature range is 70°F to 100°F (21°C to 38°C). Initial
tape application to surfaces at temperatures below 50°F (10°C) is not recommended
because the adhesive becomes too firm to adhere readily. However, once properly
applied, low temperature holding is generally satisfactory.
* When using solvents, extinguish all ignition sources, including pilot lights, and
follow the manufacturers precautions and directions for use. These cleaning
recommendations may not be compliant with the rules of certain Air Quality
Management Districts in California; consult applicable rules before use.
Humidity Resistance: High humidity has minimal effect on adhesive performance.
No significant reduction in bond strength is observed after exposure for 7 days at
90°F (32°C) and 90% relative humidity.
UV Resistance: When properly applied, nameplates and decorative trim parts are
not adversely affected by exposure.
Water Resistance: Immersion in water has no appreciable effect on the bond
strength. After 100 hours at room temperature, the high bond strength is maintained.
Temperature Cycling Resistance: High bond strength is maintained after cycling
four times through:
8 hours at 194°F (90°C)
16 hours at -40°F (-40°C)
8 hours at 100.4°F (38°C/100% RH)
16 hours at -40°F (-40°C)
Chemical Resistance: When properly applied, nameplate and decorative trim parts
will hold securely after exposure to numerous chemicals including oil, mild acids,
and alkalis.
? Foam to powder coated painted surfaces.
? Low surface energy plastic adhesion.
-3-
相关PDF资料 |
PDF描述 |
|---|---|
| 1-1437397-2 | CONN FUSE BLOCK 18-8AWG 300SR |
| MNR34J5ABJ680 | RES ARRAY 68 OHM 4 RES 2012 |
| MNR34J5ABJ622 | RES ARRAY 6.2K OHM 4 RES 2012 |
| 9629PC-54-60 | TAPE 9629PC CLR 54"X60YD |
| 4032-9"X72YD | TAPE DBL SIDED FOAM 1/32 X 9" |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 962757-1 | 制造商:TE Connectivity 功能描述:FLACHSTE-GEH MIX14P - Bulk |
| 962758-1 | 制造商:TE Connectivity 功能描述:VERSCHIEBEPLATTE - Bulk |
| 962759-1 | 制造商:TE Connectivity 功能描述:EINSATZ F 14P GEH - Bulk |
| 962760-1 | 制造商:TE Connectivity 功能描述:SCHIEBER F14P - Bulk |
| 962764-1 | 制造商:TE Connectivity 功能描述:SICHERUNGSSCHIEBER - Bulk |
发布紧急采购，3分钟左右您将得到回复。