收藏本站
参数资料
型号： 97C08T
厂商： GRAYHILL INC
元件分类： 开关
英文描述： SLIDE DIP SWITCH-8SWITCHES, SPST, LATCHED,0.025A, 24VDC, SURFACE MOUNT-STRAIGHT
封装： ROHS COMPLIANT
文件页数： 1/1页
文件大小： 364K
代理商： 97C08T
Series: 97C see fig. 1, 97R see fig. 2
Positions: 02 = .148 (3,76), 04 = .248 (6,30), 06 = .348 (8,84),
08 = .448 (11,38), 10 = .548 (13,92)
97C06SRT
T= RoHS compliant
Packaging: Blank = Tube, R = Tape and Reel (see pkg note)
Seal: Blank = Unsealed, S = Top Tape Seal
LENGTH
SEE ORDERING
INFORMATION
.050 (1,27) Pitch
.193
(4,90)
.242
(6,15)
.291
(7,39)
Top View
Side View
Front View
.177
(4,50)
.024 (0,61)
.264 (6,71)
.004
(0,10)
.050
(1,27)
Pitch
.016
(0,41)
.030 (0,76)
TAPE THICKNESS
.003 (0,08)
.059
(1,50)
Recommended PC Pad Dimensions
SeRieS 97
Half-Pitch
Surface Mount DIP Switches
FeaTUReS
Half the Size of Standard DIP Switches
Available in 2, 4, 6, 8, and 10 Positions
Low Profile
Less Mass for Easy Vacuum Pick &
Place
APPLIcAtIonS
Used in any DIP application where
space is at a premium such as
notebook computers, hand-held
radios, industrial control products,
cD-RoM drives, cellular base stations
and coin changers.
SPECIFICATIONS
Electrical Ratings
Contact Rating: 25 mA at 24 Vdc switching;
100 mA at 50 Vdc non-switching
Contact Resistance: 100 m max, initially
Insulation Resistance: 100 M minimum
at 100 Vdc
Dielectric Strength: 300 Vac for one minute
Switch Capacitance: 5pF maximum
Contact Arrangement: SPST
Mechanical Ratings
Life: 1,000 cycles minimum
Operation Force: 500 gF
Mechanical Shock: MIL-StD-202F, Method,
213B, test condition A. Gravity: 50G's (peak
value), 11 m/sec. Direction and times: 6 sides
and 3 times in each direction.
Vibration: MIL-StD-202F, Method 201A.
Passed 6 hours (2 hours in each) of three
perpendicular planes at a cycle of 10-55-
10Hz/1 minute.
Operating Temperature Range: -40 to 85°C
Storage Temperature Range: -40 to 85°C
Materials
Base and Cover: UL94V-0 nylon, black
Actuators: UL94V-0 nylon thermoplastic,
white
Base Contacts: Alloy copper with gold-plating
over nickel
Terminals: Brass with gold-plating
Tape Seal: Kapton
Soldering Information
Vapor phase and IR-reflow soldering
can be applied. With stands 255°C peak
temperature.
Cleaning: tape sealed versions are capable
of withstanding washing processes using
alcohol-based solvents only. Water or other
water-based solvent washing processes are
not recommended. Care should be taken to
avoid flux adhering to the switch body from
the circuit board soldering process.the switch
should be allowed to cool for at least 3 minutes
between the end of the solder process and the
beginning of the wash process. the solvent
stage of the cleaning process is not to exceed
1 minute and the whole wash process is not to
exceed 3 minutes. Ultrasonic or pressure wash
cleaning is not recommended.
Packaging Information
Tube:130 pcs/tube (2 positions), 75 pcs/tube (4
positions),54pcs/tube(6positions),40pcs/tube
(8 positions), 33 pcs/tube (10 positions).
tape and Reel: 97c: 4,000 pcs/reel (all
positions). 97R: 2500 pcs/reel (all positions).
Actuation Instructions: Switch slides should
be actuated from a low angle in the intended
direction of travel. the application of excess
force from a high angle can cause permanent
damage to the contact system of the switch.
tape seals must be removed to properly actuate
the switches as described above. click here for
visual sample.
CiRCUiTRy
Unless otherwise specified, tolerances are ±0.008 (0,20)
Fig. 1 Series 97c DIMEnSIonS in inches (and millimeters)
ORDERING INFORMATION
Fig. 2 Series 97R DIMEnSIonS in inches (and millimeters)
All DIP switches are shipped in the "on"
position.
DIP
4
ON
A
12 34 56 78
Top View
Side View
Front View
Recommended PC Pad Dimensions
.024
(0,6)
.047
(1,20)
.177
±.002
(4,50
±0,05)
.024
(0,6)
.319
(8,1)
.016
(0,40)
.050
(1,27)
PiTCH
.004
±.004
(0,10
±0,10)
TaPe
.002
(0,05)
.057
(1,44)
.030
(0,76)
.310
(7,85)
.360
(9,10)
.260
(6,60)
.050 (1,27) PiTCH
Unless otherwise specified, tolerances are ±0.008 (0,20)
DIP
Switches
Grayhill, Inc. 561 Hillgrove Avenue LaGrange, Illinois 60525-5997 USA Phone: 708-354-1040 Fax: 708-354-2820 www.grayhill.com
相关PDF资料
PDF描述
97C06RT SLIDE DIP SWITCH-6SWITCHES, SPST, LATCHED,0.025A, 24VDC, SURFACE MOUNT-STRAIGHT
97R02RT SLIDE DIP SWITCH-2SWITCHES, SPST, LATCHED,0.025A, 24VDC, SURFACE MOUNT-STRAIGHT
97C08RT SLIDE DIP SWITCH-8SWITCHES, SPST, LATCHED,0.025A, 24VDC, SURFACE MOUNT-STRAIGHT
97C02RT SLIDE DIP SWITCH-2SWITCHES, SPST, LATCHED,0.025A, 24VDC, SURFACE MOUNT-STRAIGHT
97R02T SLIDE DIP SWITCH-2SWITCHES, SPST, LATCHED,0.025A, 24VDC, SURFACE MOUNT-STRAIGHT
相关代理商/技术参数
参数描述
97C10RT 功能描述:SWITCH DIP 10POS HALF PITCH SMD RoHS:是 类别:开关 >> DIP 系列:97 特色产品:RDM Series Rotary DIP Switch 标准包装:70 系列:RDM 电路:十六进制 位置数:16 触点额定电压:0.1A @ 42VDC 触动器类型:用于工具旋转 触动器电平:凹槽式 安装类型:通孔 方向:顶部触动 可清洗:是 其它名称:EG4977-5RDMAR16PIT
97C10S 功能描述:SWITCH DIP 10POS HALF PITCH SMD RoHS:否 类别:开关 >> DIP 系列:97 特色产品:RDM Series Rotary DIP Switch 标准包装:70 系列:RDM 电路:十六进制 位置数:16 触点额定电压:0.1A @ 42VDC 触动器类型:用于工具旋转 触动器电平:凹槽式 安装类型:通孔 方向:顶部触动 可清洗:是 其它名称:EG4977-5RDMAR16PIT
97C10SR 功能描述:SWITCH DIP 10POS HALF PITCH SMD RoHS:否 类别:开关 >> DIP 系列:97 特色产品:RDM Series Rotary DIP Switch 标准包装:70 系列:RDM 电路:十六进制 位置数:16 触点额定电压:0.1A @ 42VDC 触动器类型:用于工具旋转 触动器电平:凹槽式 安装类型:通孔 方向:顶部触动 可清洗:是 其它名称:EG4977-5RDMAR16PIT
97C10SRT 功能描述:SWITCH DIP 10POS HALF PITCH SMD RoHS:是 类别:开关 >> DIP 系列:97 特色产品:RDM Series Rotary DIP Switch 标准包装:70 系列:RDM 电路:十六进制 位置数:16 触点额定电压:0.1A @ 42VDC 触动器类型:用于工具旋转 触动器电平:凹槽式 安装类型:通孔 方向:顶部触动 可清洗:是 其它名称:EG4977-5RDMAR16PIT
97C10ST 功能描述:SWITCH DIP HALF PITCH 10POS SMD RoHS:是 类别:开关 >> DIP 系列:97 特色产品:RDM Series Rotary DIP Switch 标准包装:70 系列:RDM 电路:十六进制 位置数:16 触点额定电压:0.1A @ 42VDC 触动器类型:用于工具旋转 触动器电平:凹槽式 安装类型:通孔 方向:顶部触动 可清洗:是 其它名称:EG4977-5RDMAR16PIT
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*