参数资料
| 型号： | 983-71-FRA UNKISSCUT |
| 厂商： | 3M |
| 文件页数： | 4/4页 |
| 文件大小： | 0K |
| 描述： | CONSPICUITY MARKING 4"X 50YD YEL |
| MSDS 材料安全数据表： | 950,980,981,983 MSDS |
| 标准包装： | 1 |
| 系列： | Diamond Grade™ 983 |
| 胶带类型： | 显著性标记带 |
| 胶合剂： | 压敏胶合剂（PSA） |
| 背衬，载体： | 衬垫 |
| 厚度： | 0.0020"（2.0 mils，0.051mm） |
| 宽： | 4.00"（101.60mm）1/3' |
| 长度： | 150'（45.7m）50 码 |
| 颜色： | 黄 |
| 使用： | 标记，反射 |
| 温度范围： | 60°F（15°C） |
| 其它名称： | 00051135339954 05113533995 75030131652 |
request), including the exclusive use of 3M
process colors and clear coatings, and
recommended application equipment; and
If the marking deteriorates due to natural causes;
such as fading, cracking, peeling, lifting, discol-
oration or the coefficient of retroreflection is less
than the minimum herein specified; 3M’s sole
responsibility and purchaser’s and user’s exclusive
remedy shall be that 3M will provide full
replacement of the 3M materials for seven years
from the date of installation.
Conditions
Such failure must be solely the result of design or
manufacturing defects in the 3M? Diamond
Grade? Conspicuity Markings and not of outside
causes such as: improper fabrication, handling,
maintenance or installation; use of process colors,
thinners, or coatings not made by 3M; use of
application procedures not recommended by 3M;
applied to a surface at greater than +20? from ver-
tical; failure of substrate; exposure to chemicals,
abrasion and other mechanical damage from fas-
teners used to mount the marking; collisions, van-
dalism or malicious mischief.
3M reserves the right to determine the method of
replacement.
Replacement markings will carry the unexpired
warranty of the marking it replaces.
Claims made under this warranty will be honored
only if 3M is notified of a failure within a reason-
able time, reasonable information requested by
3M is provided, and 3M is permitted to verify the
cause of the failure.
Limitation and Liability
3M’s liability under this warranty is limited to
replacement as stated herein, and 3M assumes no
liability for any incidental or consequential
damages, such as lost profits, business or revenues
in any way related to the product regardless of the
legal theory on which the claim is based. THIS
WARRANTY IS MADE IN LIEU OF ALL
OTHER WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED
TO THE IMPLIED WARRANTIES OF MER-
CHANTABILITY, OF FITNESS FOR A
PARTICULAR PURPOSE, AND ANY IMPLIED
WARRANTY ARISING OUT OF A COURSE
OF DEALING OR OF PERFORMANCE,
CUSTOM OR USAGE OF TRADE.
Literature Reference
IF 4.9 Application Instructions for Diamond
Grade Conspicuity Markings Series 983
FOR INFORMATION OR ASSISTANCE
CALL:
1-800-553-1380
IN CANADA CALL:
1-800-265-1840
Internet:
www.3M.com/tss
3M assumes no responsibility for any injury, loss or damage arising out of the use of a product that is not of our manufacture. Where reference
is made in literature to a commercially available product, made by another manufacturer, it shall be the user’s responsibility to ascertain the
precautionary measures for its use outlined by the manufacturer.
Important Notice
All statements, technical information and recommendations contained herein are based on tests we believe to be reliable, but the accuracy or
completeness thereof is not guaranteed, and the following is made in lieu of all warranties, or conditions express or implied. Seller’s and
manufacturer’s only obligation shall be to replace such quantity of the product proved to be defective. Neither seller nor manufacturer shall be
liable for any injury, loss or damage, direct, special or consequential, arising out of the use of or the inability to use the product. Before using,
user shall determine the suitability of the product for his/her intended use, and user assumes all risk and liability whatsoever in connection
therewith. Statements or recommendations not contained herein shall have no force or effect unless in an agreement signed by officers of seller
and manufacturer.
3M and Diamond Grade are trademarks of 3M. Used under license in Canada. Tedlar is a trademark of Dupont.
3
Traffic Safety Systems Division
3M Canada Company
3M México, S.A. de C.V.
3M Center, Building 235-3A-09
St. Paul, MN 55144-1000
1-800-553-1380
www.3M.com/tss
P.O. Box 5757
London, Ontario N6A 4T1
1-800-3MHELPS
Av. Santa Fe No. 55
Col. Santa Fe, Del. Alvaro Obregón
México, D.F. 01210
Please recycle.
? 3M 2009. All rights reserved.
Bolger 9060124
Electronic Only
相关PDF资料 |
PDF描述 |
|---|---|
| 6163.0011 | 1624 APPLIANCE INLET 16A 70C |
| MNR34J5ABJ150 | RES ARRAY 15 OHM 4 RES 2012 |
| MNR34J5ABJ111 | RES ARRAY 110 OHM 4 RES 2012 |
| 6163.0010 | 1624 APPLIANCE INLET 16A 70C |
| MCTC4825JHD | CTRLR TEMP SSR 480V 25A AC OUT |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 983-71NL ES 1 1/2"X150' | 功能描述:DIAMOND GRADE CONSPICUITY MARKIN 制造商:3m 系列:* 零件状态:在售 标准包装:1 |
| 983-71NL ES 3"X150' | 功能描述:DIAMOND GRADE CONSPICUITY MARKIN 制造商:3m 系列:* 零件状态:在售 标准包装:1 |
| 983-71NL ES 4"X150' | 功能描述:DIAMOND GRADE CONSPICUITY MARKIN 制造商:3m 系列:* 零件状态:在售 标准包装:1 |
| 983-71NL ES 6"X150' | 功能描述:DIAMOND GRADE CONSPICUITY MARKIN 制造商:3m 系列:* 零件状态:在售 标准包装:1 |
| 983-72 ES 2"X12" | 功能描述:DIAMOND GRADE CONSPICUITY MARKIN 制造商:3m 系列:* 零件状态:在售 标准包装:1 |
发布紧急采购，3分钟左右您将得到回复。