- 您现在的位置：买卖IC网 > PDF目录18755 > A-20GV21-B (Omron Electronics Inc-IA Div)BASIC SWITCH PDF资料下载
参数资料
| 型号： | A-20GV21-B |
| 厂商： | Omron Electronics Inc-IA Div |
| 文件页数： | 6/8页 |
| 文件大小： | 0K |
| 描述： | BASIC SWITCH |
| 标准包装： | 1 |
| 系列： | A |
| 电路： | 单刀双掷 |
| 开关功能： | 开-瞬时 |
| 触点额定电压： | 20A @ 125VAC |
| 触动器类型： | 按片，直形 |
| 安装类型： | 底座安装 |
| 端接类型： | 螺丝端子 |
| 操作力： | 160gf |
| 其它名称： | A20GV21B |
Safety Precautions
Be sure to read the precautions and information common to all Snap Action and Detection Switches, contained in the Technical User’s Guide,
“Snap Action Switches, Technical Information” for correct use.
Precautions for Safe Use
Terminal Connection
When soldering lead wires to the Switch, make sure that the capacity
of the soldering iron is 60 W maximum. Do not take more than 5 s to
solder any part of the Switch. The characteristics of the Switch will
deteriorate if a soldering iron with a capacity of more than 60 W is
applied to any part of the Switch for 5 s or more.
? Do not use the switch in locations subject to hot water (greater than
60 ° C) or in water vapor.
? Do not use the switch outside the specified temperature and
atmospheric conditions.
The permissible ambient temperature depends on the model.
(Refer to the specifications in this catalog.) Sudden thermal
changes may cause thermal shock to distort the switch and result
in faults.
Operation
? Make sure that the switching frequency or speed is within the
specified range.
Incorrect
Correct
Separate the
installation lo-
cation from
heat sources.
1. If the switching speed is extremely slow, the contact may not be
switched smoothly, which may result in a contact failure or contact
welding.
2. If the switching speed is extremely fast, switching shock may
damage the Switch soon. If the switching frequency is too high,
the contact may not catch up with the speed.
? Mount a cover if the switch is to be installed in a location where
worker inattention could result in incorrect operation or accidents.
The rated permissible switching speed and frequency indicate the
switching reliability of the Switch.
The life of a Switch is determined at the specified switching
speed. The life varies with the switching speed and frequency
even when they are within the permissible ranges. In order to
Incorrect
Correct
determine the life of a Switch model to be applied to a particular
use, it is best to conduct an appropriate durability test on some
samples of the model under actual conditions.
? Make sure that the actuator travel does not exceed the permissible
OT position. The operating stroke must be set to 70% to 100% of
the rated OT.
Precautions for Correct Use
Mounting Location
? Do not use the switch alone in atmospheres such as flammable or
explosive gases. Arcing and heat generation associated with
switching may cause fires or explosions.
? Switches are generally not constructed with resistance against
water. Use a protective cover to prevent direct spraying if the switch
is used in locations subject to splashing or spurting oil or water,
dust adhering.
(preventing malfunctions)
? Subjecting the switch to continuous vibration or shock may result in
contact failure or faulty operation due to abrasion powder and in
reduced durability. Excessive vibration or shock will cause the
contacts to operate malfunction or become damaged. Mount the
switch in a location that is not subject to vibration or shock and in a
direction that does not subject the switch to resonance.
? If silver contacts are used with relatively low frequency for a long
time or are used with microloads, the sulfide coating produced on
the contact surface will not be broken down and contact faults will
result. Use a microload switch that uses gold contacts.
? Do not use the switch in atmospheres with high humidity or heat or
in harmful gases, such as sulfide gas (H 2 S, SO 2 ), ammonia gas
(NH 3 ), nitric acid gas (HNO 3 ), or chlorine gas (Cl 2 ). Doing so may
impair functionality, such as with damage due to contacting faults or
corrosion.
Incorrect
Terminal box
Terminal box
Correct
? The switch includes contacts. If the switch is used in an atmosphere
with silicon gas, arc energy may cause silicon oxide (SiO 2 ) to
accumulate on the contacts and result in contact failure. If there is
silicon oil, silicon filling, silicon wiring, or other silicon products in
the vicinity of the switch, use a contact protection circuit to limit
arcing and remove the source of the silicon gas.
Panel-mounting model (A-20GQ @ )
? If a Switch is side-mounted with screws, remove the hexagonal nut
? Install the switch in a location that is not directly subject to debris
and dust from cutting. The actuator and the switch body must be
protected from accumulated cutting debris and dirt.
of the actuator.
? If a Switch is side-mounted and secured with screws, make sure
that the angle or speed of the actuating object is not excessively
Incorrect
Correct
large or too high, otherwise the Switch may be damaged.
? If a Switch is panel-mounted, pay utmost attention to make sure
that the actuating speed or OT distance is not excessively high or
large. Not doing so may damage the Switch.
24
Snap Action Switch
A
相关PDF资料 |
PDF描述 |
|---|---|
| ST-7-48 | XFRMR PWR 115V 24V 1.5A 36VA |
| JN5139-001-M/01R1V | MODULE 802.15.4 W/ SMA |
| MAX3524EUB+T | IC AMP LNA BROADBAND 10UMAX |
| MAX2232EEE+T | IC AMP POWER 900MHZ 16QSOP |
| JN5139-Z01-M/03R1T | MODULE ZIGBEE W/U.FL |
相关代理商/技术参数 |
参数描述 |
|---|---|
| A20GV21CK | 制造商:Omron Electronic Components LLC 功能描述:BASIC SWITCH - Japan |
| A-20GV21-CK | 制造商:Omron Corporation 功能描述:BASIC SWITCH |
| A-20GV21-C-K | 功能描述:基本/快动开关 BASIC SWITCH RoHS:否 制造商:Omron Electronics 触点形式:SPDT 执行器:Lever 电流额定值:5 A 电压额定值 AC:250 V 电压额定值 DC:30 V 功率额定值: 工作力:120 g IP 等级:IP 67 NEMA 额定值: 端接类型:Wire 安装:Panel |
| A20GV22 | 制造商:OMRON AUTOMATION AND SAFETY 功能描述:BASIC SWITCH 制造商:OMRON INDUSTRIAL AUTOMATION 功能描述:Switch Snap Action N.O./N.C. SPDT Short Hinge Roller Lever Solder 20A 500VAC 250VDC 1.57N Screw Mount |
| A-20GV22 | 功能描述:基本/快动开关 BASIC SWITCH RoHS:否 制造商:Omron Electronics 触点形式:SPDT 执行器:Lever 电流额定值:5 A 电压额定值 AC:250 V 电压额定值 DC:30 V 功率额定值: 工作力:120 g IP 等级:IP 67 NEMA 额定值: 端接类型:Wire 安装:Panel |
发布紧急采购，3分钟左右您将得到回复。