参数资料
型号: A009-D-V-1000
厂商: LEDdynamics Inc
文件页数: 6/9页
文件大小: 0K
描述: LED DRIVER 32V 1A
标准包装: 10
系列: BuckBlock™ A009
类型: 恒定电流
拓扑: 降压
输出数: 1
电压 - 输入(最小): 10V
电压 - 输入(最大): 32V
输出电压: 25.6V(最小值)
电流 - 输出(最大): 1A
功率(瓦特): 26W
调光: 模拟,PWM
特点: SCP
工作温度: -40°C ~ 80°C
效率: 90%
端接类型: 导线引线
尺寸/尺寸: 2.00" L x 1.20" W x 0.38" H(50.8mm x 30.5mm x 9.5mm)
安装类型: 底座安装
其它名称: 788-1037
A009 BuckBlock
TM
High Output Wide Range LED Power Module
DATA SHEET Page 6 of 9
External On/Off Control
Where a manual on/off control is desired, the potentiometer in Figure 14 may be replaced by a
pushbutton or toggle switch. The output current will be zero and the input current will drop to the
quiescent level when the switch is closed. Figures 16 and 17 show external dimming control combined
with on/off control.
Thermal Management
The BuckBlock can run many LED load configurations with no aditional heat sinking in an ambient of
25 ° C. In situations with elevated ambient temperatures, such as those that might be experience inside an
enclosed fixture, additional heat sinking may be required. If the temperature of the driver (as measured
at the T marking on the label) exceeds 60 ° C, additional heat sinking is recommended. If the temperature
of the driver exceeds 80 ° C, additional heat sinking is required.
The best surface for removing heat form the BuckBlock is the back side (opposite the labeled side). The
module can be attached to a heat sink with thermal grease and a mounting bracket that presses the unit
firmly against the heat sink, or with double-sided tape that provides both the thermal path and
mechanical mounting. When using tape (such as 3M F9469PC, a Very High Bond (VHB) tape suitable for
permanent mounting), using a thinner variety (0.005” thick or less) will aid in getting the heat through
the tape and to the heat sink. Care should be taken when positioning the BuckBlock module with VHB
tape as the high bond strength makes removing or repositioning the module very difficult.
If the BuckBlock becomes too hot during use, it will reduce the output current to limit the power
dissipation. If the temperature continues to rise, the driver will turn off until the temperature drops to a
safe level.
Connections
In all cases, the LEDs being driven should be located as close to the A009 LED output as possible. 18AWG
wire should be adequate for most wiring, but a heavier gauge should be considered when the long leads
are required.
The power input wires should also be kept short. Where the power soure is located several feet from the
unit, a 100μF or larger, 50V capacitor may be required across the input terminals as shown in Figure 20.
?2011 LUXdrive, A Division of LEDdynamics, Inc. www.LUXdrive.com.
LEDdynamics, Inc.
Specifications subject to change without notice. April, 2011 - Rev 1.0
802.728.4533 P
802.728.3800 F
sales@LUXdrive.com
www.LUXdrive.com
Made in
the USA
相关PDF资料
PDF描述
A011-D-V-500 LED SUPPLY CC FLEXBLOCK 500MA
A3940KLPTR-T IC CTLR MOSFET FULL 28-TSSOP
A3941KLPTR-T IC MOSFET FULL BRDG AUTO 28TSSOP
A3942KLGTR-T IC GATE DVR QUAD HISIDE 38-TSSOP
A3944KLPTR-T IC PREDRIVER MOSFET 6CH TSSOP
相关代理商/技术参数
参数描述
A009-D-V-1400 功能描述:LED DRIVER 32V 1.4A RoHS:是 类别:电源 - 外部/内部(非板载) >> LED 电源 - 恒定电压 系列:BuckBlock™ A009 标准包装:1 系列:LXV150 类型:恒定电压 拓扑:AC DC 转换器 输出数:1 电压 - 输入(最小):90VAC 电压 - 输入(最大):264VAC 输出电压:40V 电流 - 输出(最大):3.75A 功率(瓦特):150W 电压 - 隔离:3.75kV(3750V) 调光:- 特点:OCP,OTP,OVP,SCP 工作温度:-35°C ~ 70°C 效率:93% 端接类型:导线引线 尺寸/尺寸:8.90" L x 2.66" W x 1.57" H(226.0mm x 67.5mm x 40.0mm) 安装类型:底座安装 批准:CE,cULus,EN 额定值:IP67 重量:2.3 磅(1kg)
A009-D-V-2100 功能描述:LED DRIVER 32V 2.1A RoHS:是 类别:电源 - 外部/内部(非板载) >> LED 电源 - 恒定电压 系列:BuckBlock™ A009 标准包装:1 系列:LXV150 类型:恒定电压 拓扑:AC DC 转换器 输出数:1 电压 - 输入(最小):90VAC 电压 - 输入(最大):264VAC 输出电压:40V 电流 - 输出(最大):3.75A 功率(瓦特):150W 电压 - 隔离:3.75kV(3750V) 调光:- 特点:OCP,OTP,OVP,SCP 工作温度:-35°C ~ 70°C 效率:93% 端接类型:导线引线 尺寸/尺寸:8.90" L x 2.66" W x 1.57" H(226.0mm x 67.5mm x 40.0mm) 安装类型:底座安装 批准:CE,cULus,EN 额定值:IP67 重量:2.3 磅(1kg)
A01 功能描述:罩类、盒类及壳类产品 4-1/2 x dia. x 7/8 (0.769cf)1 Comprtmnt RoHS:否 制造商:Bud Industries 产品:Boxes 外部深度:6.35 mm 外部宽度:6.35 mm 外部高度:2.56 mm NEMA 额定值: IP 等级: 材料:Acrylonitrile Butadiene Styrene (ABS) 颜色:Red
A010 功能描述:ADAPTER PROGRAMMER 32-DIP RoHS:否 类别:编程器,开发系统 >> 过时/停产零件编号 系列:- 标准包装:1 系列:- 类型:MCU 适用于相关产品:Freescale MC68HC908LJ/LK(80-QFP ZIF 插口) 所含物品:面板、缆线、软件、数据表和用户手册 其它名称:520-1035
A01000.LN 功能描述:LOCKNUT NPT 1" GALVANIZED STEEL RoHS:是 类别:线缆,导线 - 管理 >> 配件 系列:- 标准包装:1 系列:- 附件类型:缆线绕线器 适用于相关产品:质轻缆线 材质:- 特点:手持型,电动 其它名称:774-1004