- 您现在的位置：买卖IC网 > PDF目录235913 > A109S1MSZQ (C K COMPONENTS INC) ROTARY SWITCH-9POSITIONS, SP9T, LATCHED, 0.35A, 125VDC, PANEL MOUNT-THREADED PDF资料下载
参数资料
| 型号： | A109S1MSZQ |
| 厂商： | C K COMPONENTS INC |
| 元件分类： | 开关 |
| 英文描述： | ROTARY SWITCH-9POSITIONS, SP9T, LATCHED, 0.35A, 125VDC, PANEL MOUNT-THREADED |
| 封装： | ROHS COMPLIANT |
| 文件页数： | 5/5页 |
| 文件大小： | 355K |
| 代理商： | A109S1MSZQ |
L–7
L
Rotary
A Series
1-4 Pole Rotary Switches
FUNCTION
AVAILABLE HARDWARE
SPLASHPROOF
BUSHING SEAL
(FIG. 1)
(FIG. 2)
(FIG. 3)
REMOVABLE CLIP
LOCATING
TAB
STANDOFF
K EPOXY & SPLASHPROOF BUSHING SEAL
F SPLASHPROOF BUSHING SEAL
NONE NO SEAL
E
EPOXY SEAL
Stop ring
PART NO.
767B00201
Material: Brass
Finish: Nickel plated
Setting Stops on A112 and A125 Models
The number of switch positions is adjustable on A112
and A125 models only by means of a stop ring provided
with each switch. The number of positions is pre-set on
all other models and the stop ring is factory installed.
Soldering
1. Insert switch base only into PC board.
2. Do not bend terminals.
3. Wave soldering recommended at
500F solder temperature.
4. Hand solder at 500F, 10 sec.
max./terminal.
Switch Assembly
1. Hold housing/shaft assembly by housing. Remove
protective cap by squeezing tabs and discard. (FIG. 1)
2. Do not push on switch shaft. Detent mechanism will
come apart.
3. While holding switch housing, align locating tab on
base with notch on housing and engage 4 housing
latches in slots on base. (FIG. 2)
4. Push firmly on housing until latches snap in place.
5. Remove clip from shaft and discard. Assembly is
complete. (FIG. 3)
Cleaning
1. Flux clean using vapor degreaser and forced
rinse or triple bath method.
2. Do not allow switch base to ‘trap’ fluids.
3. Freon TMC, TF or Methylene Chloride give
excellent results.
To set stops: Turn shaft fully counter-clockwise and
insert stop ring tab in desired hole. Install lockwasher
and nut to retain stop ring for both PC and panel
mounting. Switch without stop ring has 12 positions.
Soldering, Cleaning and Assembly Instructions for ‘MC’ Termination Option
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
相关PDF资料 |
PDF描述 |
|---|---|
| A109S1RNMCBF | ROTARY SWITCH-9POSITIONS, SP9T, LATCHED, 0.02A, 20VDC, THROUGH HOLE-STRAIGHT |
| AM51666D53N | SNAP ACTING/LIMIT SWITCH, SPST, MOMENTARY, 16A, 125VDC, 4.6mm, PANEL MOUNT |
| A11515RNZBF | ROTARY SWITCH-3POSITIONS, SP3T, LATCHED, 0.02A, 20VDC, PANEL MOUNT-THREADED |
| A10314RNCQK | ROTARY SWITCH-3POSITIONS, SP3T, LATCHED, 0.35A, 125VDC, THROUGH HOLE-STRAIGHT |
| A10315RNMCQF | ROTARY SWITCH-3POSITIONS, SP3T, LATCHED, 0.35A, 125VDC, THROUGH HOLE-STRAIGHT |
相关代理商/技术参数 |
参数描述 |
|---|---|
| A109S1RNCQ | 制造商:C&K Components 功能描述:Switch Rotary SP9T 9 Screwdriver PC Pins 2.5A 125VAC 125VDC 制造商:C&K Components 功能描述:Switch Rotary N.O./N.C. SP9T 9 Screwdriver PC Pins 2.5A 125VAC 125VDC |
| A109S1RNZQ | 制造商:ITT 制造商全称:ITT Industries 功能描述:1-4 Pole Rotary Switches |
| A109S1RSZQ | 制造商:ITT 制造商全称:ITT Industries 功能描述:1-4 Pole Rotary Switches |
| A10A50X1A | 制造商:ANAREN 制造商全称:Anaren Microwave 功能描述:Chip Termination 10 Watts, 50W |
| A10AM | 制造商:SCHURTER 制造商全称:Schurter Inc. 功能描述:Miniature Fuse, 10.3 x 38 mm, aM, 500 VAC |
发布紧急采购，3分钟左右您将得到回复。